dsx3bert OBJECT IDENTIFIER ::= { axisDiagnostics 2 }
rasDsk OBJECT IDENTIFIER ::= { axisDiagnostics 2 }
Vendor: Stratacom
Module: BASIS-RAS-DISK-MIB
[Automatically extracted from oidview.com]
rasDsk OBJECT IDENTIFIER ::= { axisDiagnostics 2 }
dsx3bert OBJECT IDENTIFIER ::= { axisDiagnostics 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.6.2.1 | rasDskStatus, dsx3bertControl | 1 | 1 | Indicates whether the RAS Disk diagnostics has been Enabled or not. |
1.3.6.1.4.1.351.110.6.2.2 | dskHealth, dsx3bertResourceStatus | 1 | 1 | All of bert resources can be used by only one user at a time. This object provides the status of the resources. |
1.3.6.1.4.1.351.110.6.2.3 | standbyDskHealth, dsx3bertOwner | 1 | 1 | This refers to the user who owns the BERT resources. If the user is a CLI user, then this is username. If it is SNMP Manager, the… |
1.3.6.1.4.1.351.110.6.2.4 | wakeupInterval, dsx3bertUserId | 1 | 1 | Indicates the RAS Disk diagnostics task Wake up time period, in HOURS. This Interval is configurable between 12 hours and 7 days.… |
1.3.6.1.4.1.351.110.6.2.5 | lastTime, dsx3bertStatus | 1 | 1 | Shows the Time when the RAS Disk diagnostics was Last done. The format is DD MONTH HH:MM:SS. |
1.3.6.1.4.1.351.110.6.2.6 | numBadSectors, dsx3bertTestMedium | 1 | 1 | Indicates the Number of Bad Sectors found in the Disk. |
1.3.6.1.4.1.351.110.6.2.7 | crptdPRIfiles, dsx3bertPort | 1 | 1 | Indicates the Number of SM configuration files, corrupted. |
1.3.6.1.4.1.351.110.6.2.8 | crptdFWfiles, dsx3bertLine | 1 | 1 | Indicates the Number of FirmWare files, corrupted. |
1.3.6.1.4.1.351.110.6.2.9 | dsx3bertMode | 1 | 1 | This object specifies the mode, the BERT module is to be configured for. The value loopback(2) is not supported in CESM-T3E3 and … |
1.3.6.1.4.1.351.110.6.2.10 | dsx3bertPattern | 1 | 1 | This variable determines BERT pattern to be transmitted on the interface identified by dsx3bertLine or dsx3bertPort. Bit error me… |
1.3.6.1.4.1.351.110.6.2.11 | dsx3bertLoopback | 1 | 1 | This object specifies the type of loopback to be established/de-established. The value farEndLoopback(1) is not supported in CESM-… |
1.3.6.1.4.1.351.110.6.2.12 | dsx3bertStartTime | 1 | 1 | This object contains the time at which BERT started. The syntax is hh:mm:ss. The time zone is as configured in the shelf. This obj… |
1.3.6.1.4.1.351.110.6.2.13 | dsx3bertStartDate | 1 | 1 | This object contains the date on which BERT started. The syntax is yy/mm/dd. This object contains zero length string for followin… |
1.3.6.1.4.1.351.110.6.2.14 | dsx3bertBitCountUpper | 1 | 1 | This number of bits transmitted is represented in an encoded form as a 64-bit counter. This object gives the upper 31 bits of the… |
1.3.6.1.4.1.351.110.6.2.15 | dsx3bertBitCountLower | 1 | 1 | This number of bits transmitted is represented in an encoded form as a 64-bit counter. This object gives the lower 31 bits of the… |
1.3.6.1.4.1.351.110.6.2.16 | dsx3bertBitErrorCountUpper | 1 | 1 | This number of bits received in error is represented in an encoded form as a 64-bit counter. This object gives the upper 31 bits … |
1.3.6.1.4.1.351.110.6.2.17 | dsx3bertBitErrorCountLower | 1 | 1 | This number of bits received in error is represented in an encoded form as a 64-bit counter. This object gives the lower 31 bits … |
1.3.6.1.4.1.351.110.6.2.18 | dsx3bertErrorInsertionRate | 1 | 1 | This object is used for injecting continuous errors into transmitted BERT pattern. The errors are inserted in a BERT pattern sen… |
1.3.6.1.4.1.351.110.6.2.19 | dsx3bertErrorInjectCount | 1 | 1 | This shows the number of times error was injected. |
1.3.6.1.4.1.351.110.6.2.20 | dsx3bertCleanupAction | 1 | 1 | When the BERT has to be stopped or aborted (due to card state changes), this object would give the exact action to take. The bert… |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.6.1 | bert | 28 | 66 | None |
1.3.6.1.4.1.351.110.6.3 | onlineDiagnostics | 3 | 6 | None |