This object controls all the SET operations on this MIB group.
noAction : No action is taken. This value can not be written
This object contains value noAction(0)
just after setting it to delBert(6).
acquireBert : Acquire BERT resources.
cnfBert : Configure the required BERT test.
startBert : The configured test has to be started.
modBert : Modify parameters for the ongoing BERT test.
delBert : Running BERT test has to be stopped.
This value is write-only. This value is
never returned for a SNMP Get request.
For Performing BERT : Following sequence need to be done.
* acquire BERT by setting this object to acquireBert(1).
* configure BERT by setting this object to cnfBert(3)
* Start BERT by setting this object to startBert(4).
* Modify BERT parameters by setting this object to modBert(5).
Parsed from file CISCO-MGX82XX-DSX3-BERT-MIB.mib
Module: CISCO-MGX82XX-DSX3-BERT-MIB
Indicates whether the RAS Disk diagnostics has been
Enabled or not.
Indicates whether the RAS Disk diagnostics has been
Enabled or not.
Parsed from file BASIS-RAS-DISK-MIB.my.txt
Company: None
Module: BASIS-RAS-DISK-MIB
This object controls all the SET operations on this MIB group.
noAction : No action is taken. This value can not be written
This object contains value noAction(0)
just after setting it to delBert(6).
acquireBert : Acquire BERT resources.
cnfBert : Configure the required BERT test.
startBert : The configured test has to be started.
modBert : Modify parameters for the ongoing BERT test.
delBert : Running BERT test has to be stopped.
This value is write-only. This value is
never returned for a SNMP Get request.
For Performing BERT : Following sequence need to be done.
* acquire BERT by setting this object to acquireBert(1).
* configure BERT by setting this object to cnfBert(3)
* Start BERT by setting this object to startBert(4).
* Modify BERT parameters by setting this object to modBert(5).
dsx3bertControl OBJECT-TYPE SYNTAX INTEGER { noAction (0), acquireBert (1), releaseBert (2), cnfBert (3), startBert (4), modBert (5), delBert (6) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls all the SET operations on this MIB group. noAction : No action is taken. This value can not be written This object contains value noAction(0) just after setting it to delBert(6). acquireBert : Acquire BERT resources. cnfBert : Configure the required BERT test. startBert : The configured test has to be started. modBert : Modify parameters for the ongoing BERT test. delBert : Running BERT test has to be stopped. This value is write-only. This value is never returned for a SNMP Get request. For Performing BERT : Following sequence need to be done. * acquire BERT by setting this object to acquireBert(1). * configure BERT by setting this object to cnfBert(3) * Start BERT by setting this object to startBert(4). * Modify BERT parameters by setting this object to modBert(5)." DEFVAL { noAction } ::= { dsx3bert 1 }
rasDskStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the RAS Disk diagnostics has been Enabled or not." DEFVAL { disable } ::= { rasDsk 1 }
Vendor: Stratacom
Module: BASIS-RAS-DISK-MIB
[Automatically extracted from oidview.com]
rasDskStatus OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the RAS Disk diagnostics has been Enabled or not. " DEFVAL { disable } ::= { rasDsk 1 }
dsx3bertControl OBJECT-TYPE SYNTAX INTEGER { noAction (0), acquireBert (1), releaseBert (2), cnfBert (3), startBert (4), modBert (5), delBert (6) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls all the SET operations on this MIB group. noAction : No action is taken. This value can not be written This object contains value noAction(0) just after setting it to delBert(6). acquireBert : Acquire BERT resources. cnfBert : Configure the required BERT test. startBert : The configured test has to be started. modBert : Modify parameters for the ongoing BERT test. delBert : Running BERT test has to be stopped. This value is write-only. This value is never returned for a SNMP Get request. For Performing BERT : Following sequence need to be done. * acquire BERT by setting this object to acquireBert(1). * configure BERT by setting this object to cnfBert(3) * Start BERT by setting this object to startBert(4). * Modify BERT parameters by setting this object to modBert(5)." DEFVAL { noAction } ::= { dsx3bert 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.6.2.1.0 | rasDskStatus | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.6.2.2 | dskHealth, dsx3bertResourceStatus | 1 | 1 | All of bert resources can be used by only one user at a time. This object provides the status of the resources. |
1.3.6.1.4.1.351.110.6.2.3 | standbyDskHealth, dsx3bertOwner | 1 | 1 | This refers to the user who owns the BERT resources. If the user is a CLI user, then this is username. If it is SNMP Manager, the… |
1.3.6.1.4.1.351.110.6.2.4 | wakeupInterval, dsx3bertUserId | 1 | 1 | Indicates the RAS Disk diagnostics task Wake up time period, in HOURS. This Interval is configurable between 12 hours and 7 days.… |
1.3.6.1.4.1.351.110.6.2.5 | lastTime, dsx3bertStatus | 1 | 1 | Shows the Time when the RAS Disk diagnostics was Last done. The format is DD MONTH HH:MM:SS. |
1.3.6.1.4.1.351.110.6.2.6 | numBadSectors, dsx3bertTestMedium | 1 | 1 | Indicates the Number of Bad Sectors found in the Disk. |
1.3.6.1.4.1.351.110.6.2.7 | crptdPRIfiles, dsx3bertPort | 1 | 1 | Indicates the Number of SM configuration files, corrupted. |
1.3.6.1.4.1.351.110.6.2.8 | crptdFWfiles, dsx3bertLine | 1 | 1 | Indicates the Number of FirmWare files, corrupted. |
1.3.6.1.4.1.351.110.6.2.9 | dsx3bertMode | 1 | 1 | This object specifies the mode, the BERT module is to be configured for. The value loopback(2) is not supported in CESM-T3E3 and … |
1.3.6.1.4.1.351.110.6.2.10 | dsx3bertPattern | 1 | 1 | This variable determines BERT pattern to be transmitted on the interface identified by dsx3bertLine or dsx3bertPort. Bit error me… |
1.3.6.1.4.1.351.110.6.2.11 | dsx3bertLoopback | 1 | 1 | This object specifies the type of loopback to be established/de-established. The value farEndLoopback(1) is not supported in CESM-… |
1.3.6.1.4.1.351.110.6.2.12 | dsx3bertStartTime | 1 | 1 | This object contains the time at which BERT started. The syntax is hh:mm:ss. The time zone is as configured in the shelf. This obj… |
1.3.6.1.4.1.351.110.6.2.13 | dsx3bertStartDate | 1 | 1 | This object contains the date on which BERT started. The syntax is yy/mm/dd. This object contains zero length string for followin… |
1.3.6.1.4.1.351.110.6.2.14 | dsx3bertBitCountUpper | 1 | 1 | This number of bits transmitted is represented in an encoded form as a 64-bit counter. This object gives the upper 31 bits of the… |
1.3.6.1.4.1.351.110.6.2.15 | dsx3bertBitCountLower | 1 | 1 | This number of bits transmitted is represented in an encoded form as a 64-bit counter. This object gives the lower 31 bits of the… |
1.3.6.1.4.1.351.110.6.2.16 | dsx3bertBitErrorCountUpper | 1 | 1 | This number of bits received in error is represented in an encoded form as a 64-bit counter. This object gives the upper 31 bits … |
1.3.6.1.4.1.351.110.6.2.17 | dsx3bertBitErrorCountLower | 1 | 1 | This number of bits received in error is represented in an encoded form as a 64-bit counter. This object gives the lower 31 bits … |
1.3.6.1.4.1.351.110.6.2.18 | dsx3bertErrorInsertionRate | 1 | 1 | This object is used for injecting continuous errors into transmitted BERT pattern. The errors are inserted in a BERT pattern sen… |
1.3.6.1.4.1.351.110.6.2.19 | dsx3bertErrorInjectCount | 1 | 1 | This shows the number of times error was injected. |
1.3.6.1.4.1.351.110.6.2.20 | dsx3bertCleanupAction | 1 | 1 | When the BERT has to be stopped or aborted (due to card state changes), this object would give the exact action to take. The bert… |