All of bert resources can be used by only one user at a time.
This object provides the status of the resources.
Parsed from file CISCO-MGX82XX-DSX3-BERT-MIB.mib
Module: CISCO-MGX82XX-DSX3-BERT-MIB
Shows the Status of the Hard Disk, which depends on the
number of corrupted files and number of Bad sectors in
the ASC. The Status is PASS if there are no Corrupted
files in the Disk AND the number of Bad Sectors is within
the threshold value. If the Disk has one or more
Corrupted files OR if the Number of Bad Sectors exceeds
the threshold value, the Status is FAIL. If Diagnostics
is going on, the Status is TestInProgress. Status will be
UNKNOWN until the diagnostics starts for the first time.
Shows the Status of the Hard Disk, which depends on the
number of corrupted files and number of Bad sectors in
the ASC. The Status is PASS if there are no Corrupted
files in the Disk AND the number of Bad Sectors is within
the threshold value. If the Disk has one or more
Corrupted files OR if the Number of Bad Sectors exceeds
the threshold value, the Status is FAIL. If Diagnostics
is going on, the Status is TestInProgress. Status will be
UNKNOWN until the diagnostics starts for the first time.
Parsed from file BASIS-RAS-DISK-MIB.my.txt
Company: None
Module: BASIS-RAS-DISK-MIB
All of bert resources can be used by only one user at a time.
This object provides the status of the resources.
dsx3bertResourceStatus OBJECT-TYPE SYNTAX INTEGER { free (1), inUse (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "All of bert resources can be used by only one user at a time. This object provides the status of the resources." DEFVAL { free } ::= { dsx3bert 2 }
dskHealth OBJECT-TYPE SYNTAX INTEGER { pass(1), fail(2), unknown(3), testInProgress(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Shows the Status of the Hard Disk, which depends on the number of corrupted files and number of Bad sectors in the ASC. The Status is PASS if there are no Corrupted files in the Disk AND the number of Bad Sectors is within the threshold value. If the Disk has one or more Corrupted files OR if the Number of Bad Sectors exceeds the threshold value, the Status is FAIL. If Diagnostics is going on, the Status is TestInProgress. Status will be UNKNOWN until the diagnostics starts for the first time." DEFVAL { unknown } ::= { rasDsk 2 }
Vendor: Stratacom
Module: BASIS-RAS-DISK-MIB
[Automatically extracted from oidview.com]
dskHealth OBJECT-TYPE SYNTAX INTEGER { pass (1), fail (2), unknown (3), testInProgress (4) } ACCESS read-only STATUS mandatory DESCRIPTION "Shows the Status of the Hard Disk, which depends on the number of corrupted files and number of Bad sectors in the ASC. The Status is PASS if there are no Corrupted files in the Disk AND the number of Bad Sectors is within the threshold value. If the Disk has one or more Corrupted files OR if the Number of Bad Sectors exceeds the threshold value, the Status is FAIL. If Diagnostics is going on, the Status is TestInProgress. Status will be UNKNOWN until the diagnostics starts for the first time. " DEFVAL { unknown } ::= { rasDsk 2 }
dsx3bertResourceStatus OBJECT-TYPE SYNTAX INTEGER { free (1), inUse (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "All of bert resources can be used by only one user at a time. This object provides the status of the resources." DEFVAL { free } ::= { dsx3bert 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.6.2.2.0 | dskHealth | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.6.2.1 | rasDskStatus, dsx3bertControl | 1 | 1 | Indicates whether the RAS Disk diagnostics has been Enabled or not. |
| 1.3.6.1.4.1.351.110.6.2.3 | standbyDskHealth, dsx3bertOwner | 1 | 1 | This refers to the user who owns the BERT resources. If the user is a CLI user, then this is username. If it is SNMP Manager, the… |
| 1.3.6.1.4.1.351.110.6.2.4 | wakeupInterval, dsx3bertUserId | 1 | 1 | Indicates the RAS Disk diagnostics task Wake up time period, in HOURS. This Interval is configurable between 12 hours and 7 days.… |
| 1.3.6.1.4.1.351.110.6.2.5 | lastTime, dsx3bertStatus | 1 | 1 | Shows the Time when the RAS Disk diagnostics was Last done. The format is DD MONTH HH:MM:SS. |
| 1.3.6.1.4.1.351.110.6.2.6 | numBadSectors, dsx3bertTestMedium | 1 | 1 | Indicates the Number of Bad Sectors found in the Disk. |
| 1.3.6.1.4.1.351.110.6.2.7 | crptdPRIfiles, dsx3bertPort | 1 | 1 | Indicates the Number of SM configuration files, corrupted. |
| 1.3.6.1.4.1.351.110.6.2.8 | crptdFWfiles, dsx3bertLine | 1 | 1 | Indicates the Number of FirmWare files, corrupted. |
| 1.3.6.1.4.1.351.110.6.2.9 | dsx3bertMode | 1 | 1 | This object specifies the mode, the BERT module is to be configured for. The value loopback(2) is not supported in CESM-T3E3 and … |
| 1.3.6.1.4.1.351.110.6.2.10 | dsx3bertPattern | 1 | 1 | This variable determines BERT pattern to be transmitted on the interface identified by dsx3bertLine or dsx3bertPort. Bit error me… |
| 1.3.6.1.4.1.351.110.6.2.11 | dsx3bertLoopback | 1 | 1 | This object specifies the type of loopback to be established/de-established. The value farEndLoopback(1) is not supported in CESM-… |
| 1.3.6.1.4.1.351.110.6.2.12 | dsx3bertStartTime | 1 | 1 | This object contains the time at which BERT started. The syntax is hh:mm:ss. The time zone is as configured in the shelf. This obj… |
| 1.3.6.1.4.1.351.110.6.2.13 | dsx3bertStartDate | 1 | 1 | This object contains the date on which BERT started. The syntax is yy/mm/dd. This object contains zero length string for followin… |
| 1.3.6.1.4.1.351.110.6.2.14 | dsx3bertBitCountUpper | 1 | 1 | This number of bits transmitted is represented in an encoded form as a 64-bit counter. This object gives the upper 31 bits of the… |
| 1.3.6.1.4.1.351.110.6.2.15 | dsx3bertBitCountLower | 1 | 1 | This number of bits transmitted is represented in an encoded form as a 64-bit counter. This object gives the lower 31 bits of the… |
| 1.3.6.1.4.1.351.110.6.2.16 | dsx3bertBitErrorCountUpper | 1 | 1 | This number of bits received in error is represented in an encoded form as a 64-bit counter. This object gives the upper 31 bits … |
| 1.3.6.1.4.1.351.110.6.2.17 | dsx3bertBitErrorCountLower | 1 | 1 | This number of bits received in error is represented in an encoded form as a 64-bit counter. This object gives the lower 31 bits … |
| 1.3.6.1.4.1.351.110.6.2.18 | dsx3bertErrorInsertionRate | 1 | 1 | This object is used for injecting continuous errors into transmitted BERT pattern. The errors are inserted in a BERT pattern sen… |
| 1.3.6.1.4.1.351.110.6.2.19 | dsx3bertErrorInjectCount | 1 | 1 | This shows the number of times error was injected. |
| 1.3.6.1.4.1.351.110.6.2.20 | dsx3bertCleanupAction | 1 | 1 | When the BERT has to be stopped or aborted (due to card state changes), this object would give the exact action to take. The bert… |