An entry in the cwAtmChanCnfgTable. The each entry
corresponds to a connection endpoint identified
by interface(ifIndex),Virtual Path Identifier(VPI)
and Virtual Channel Identifier(VCI). The ifIndex
is for those entries in ifTable identified by
ifType values atmVirtual(149) and propAtm(197).
Parsed from file CISCO-WAN-ATM-CONN-MIB.mib
Module: CISCO-WAN-ATM-CONN-MIB
An entry in the cwAtmChanCnfgTable. The each entry
corresponds to a connection endpoint identified
by interface(ifIndex),Virtual Path Identifier(VPI)
and Virtual Channel Identifier(VCI). The ifIndex
is for those entries in ifTable identified by
ifType values atmVirtual(149) and propAtm(197).
An entry in the cwAtmChanCnfgTable. The each entry
corresponds to a connection endpoint identified
by interface(ifIndex),Virtual Path Identifier(VPI)
and Virtual Channel Identifier(VCI). The ifIndex
is for those entries in ifTable identified by
ifType values atmVirtual(149) and propAtm(197).
Parsed from file CISCO-WAN-ATM-CONN-MIB.my.txt
Company: None
Module: CISCO-WAN-ATM-CONN-MIB
An entry in the cwAtmChanCnfgTable. The each entry
corresponds to a connection endpoint identified
by interface(ifIndex),Virtual Path Identifier(VPI)
and Virtual Channel Identifier(VCI). The ifIndex
is for those entries in ifTable identified by
ifType values atmVirtual(149) and propAtm(197).
cwAtmChanCnfgEntry OBJECT-TYPE SYNTAX CwAtmChanCnfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the cwAtmChanCnfgTable. The each entry corresponds to a connection endpoint identified by interface(ifIndex),Virtual Path Identifier(VPI) and Virtual Channel Identifier(VCI). The ifIndex is for those entries in ifTable identified by ifType values atmVirtual(149) and propAtm(197)." INDEX { ifIndex, cwaChanVpi, cwaChanVci } ::= { cwAtmChanCnfgTable 1 }
cwAtmChanCnfgEntry OBJECT-TYPE SYNTAX CwAtmChanCnfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the cwAtmChanCnfgTable. The each entry corresponds to a connection endpoint identified by interface(ifIndex),Virtual Path Identifier(VPI) and Virtual Channel Identifier(VCI). The ifIndex is for those entries in ifTable identified by ifType values atmVirtual(149) and propAtm(197)." INDEX { ifIndex, cwaChanVpi, cwaChanVci } ::= { cwAtmChanCnfgTable 1 }
Vendor: Stratacom
Module: CISCO-WAN-ATM-CONN-MIB
[Automatically extracted from oidview.com]
cwAtmChanCnfgEntry OBJECT-TYPE SYNTAX CwAtmChanCnfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the cwAtmChanCnfgTable. The each entry corresponds to a connection endpoint identified by interface(ifIndex),Virtual Path Identifier(VPI) and Virtual Channel Identifier(VCI). The ifIndex is for those entries in ifTable identified by ifType values atmVirtual(149) and propAtm(197)." INDEX { ifIndex, cwaChanVpi, cwaChanVci } ::= { cwAtmChanCnfgTable 1 }
cwAtmChanCnfgEntry OBJECT-TYPE SYNTAX CwAtmChanCnfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the cwAtmChanCnfgTable. The each entry corresponds to a connection endpoint identified by interface(ifIndex),Virtual Path Identifier(VPI) and Virtual Channel Identifier(VCI). The ifIndex is for those entries in ifTable identified by ifType values atmVirtual(149) and propAtm(197)." INDEX { ifIndex, cwaChanVpi, cwaChanVci } ::= { cwAtmChanCnfgTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.150.1.1.1.1.1.1 | cwaChanVpi | 0 | 0 | The VPI value of a VP or VC connection. The cwaChanVpcFlag serves to distinguish if this is a VP/VC connection |
1.3.6.1.4.1.351.150.1.1.1.1.1.2 | cwaChanVci | 0 | 0 | The VCI value of VC connection. The cwaChanVpcFlag serves to distinguish if this is a VP/VC connection. For a VPC, the VCI is irr… |
1.3.6.1.4.1.351.150.1.1.1.1.1.3 | cwaChanServiceCategory | 0 | 0 | This object identifies the service type to which this connection belongs. The service type specified is one among the ATM forum s… |
1.3.6.1.4.1.351.150.1.1.1.1.1.4 | cwaChanVpcFlag | 0 | 0 | This object indentifies if the endpoint is a VP/VC endpoint. For a VPC, this object is set to true(1); For a VCC, this object is … |
1.3.6.1.4.1.351.150.1.1.1.1.1.5 | cwaChanIdentifier | 0 | 0 | This number represents a RESOURCE at the switch that has been assigned for this connection (identified by ifIndex, cwaChanVpi and… |
1.3.6.1.4.1.351.150.1.1.1.1.1.6 | cwaChanUploadCounter | 0 | 0 | This counter tracks the number of configuration changes that happen on a specific endpoint (identified by ifIndex, cwaChanVpi, an… |
1.3.6.1.4.1.351.150.1.1.1.1.1.7 | cwaChanStatsEnable | 0 | 0 | Limits imposed by software or hardware implementations could restrict the amount of statistical data that can be maintained in a … |
1.3.6.1.4.1.351.150.1.1.1.1.1.8 | cwaChanCCEnable | 0 | 0 | This object serves to enable or disable continuity check(CC) on a connection endpoint. When continuity check is enabled on an end… |
1.3.6.1.4.1.351.150.1.1.1.1.1.9 | cwaChanLocalVpi | 0 | 0 | This object identifies the internal VPI assigned to a local endpoint, by the switch. The cwaChanLocalVpi, cwaChanLocalVci and the… |
1.3.6.1.4.1.351.150.1.1.1.1.1.10 | cwaChanLocalVci | 0 | 0 | This object identifies the internal VCI assigned to a local endpoint, by the switch. The cwaChanLocalVpi, cwaChanLocalVci and the… |
1.3.6.1.4.1.351.150.1.1.1.1.1.11 | cwaChanLocalNSAPAddr | 0 | 0 | This object identifies the internal NSAP assigned to a local endpoint, by the switch. The cwaChanLocalVpi, cwaChanLocalVci and th… |
1.3.6.1.4.1.351.150.1.1.1.1.1.12 | cwaChanRemoteVpi | 0 | 0 | This object identifies the VPI of the peer endpoint. The cwaChanRemoteVpi, cwaChanRemoteVpi and the cwaChanRemoteNSAPAddr, identi… |
1.3.6.1.4.1.351.150.1.1.1.1.1.13 | cwaChanRemoteVci | 0 | 0 | This object identifies the VCI of the peer endpoint. The cwaChanRemoteVpi, cwaChanRemoteVpi and the cwaChanRemoteNSAPAddr, identi… |
1.3.6.1.4.1.351.150.1.1.1.1.1.14 | cwaChanRemoteNSAPAddr | 0 | 0 | This object identifies the NSAP of the peer endpoint. The cwaChanRemoteVpi, cwaChanRemoteVpi and the cwaChanRemoteNSAPAddr, ident… |
1.3.6.1.4.1.351.150.1.1.1.1.1.15 | cwaChanControllerId | 0 | 0 | This object serves to associate an endpoint with a specific controller. Usually resource partitioning makes the association betwe… |
1.3.6.1.4.1.351.150.1.1.1.1.1.16 | cwaChanRoutingMastership | 0 | 0 | This object, if set to true(1) identifies that this endpoint as the `master' endpoint of the connection. When set to false(2) thi… |
1.3.6.1.4.1.351.150.1.1.1.1.1.17 | cwaChanMaxCost | 0 | 0 | This object is used by the networking entity to select a route based on administrative weight of possible routes. Administrative … |
1.3.6.1.4.1.351.150.1.1.1.1.1.18 | cwaChanReroute | 0 | 0 | This is used by the administrator to trigger the re-routing of the connection. * Rerouting takes effect, when this object is set … |
1.3.6.1.4.1.351.150.1.1.1.1.1.19 | cwaChanFrameDiscard | 0 | 0 | When set to true(1), enables the frame discard feature for the connection. This is applicable only to the master endpoint (cwaCha… |
1.3.6.1.4.1.351.150.1.1.1.1.1.20 | cwaChanOperStatus | 0 | 0 | Reflects operational status of an endpoint. * This object is set to operFail(2), if the connection is not routed or if the endpoi… |
1.3.6.1.4.1.351.150.1.1.1.1.1.21 | cwaChanPCR | 0 | 0 | Peak cell rate (PCR) for the direction local -> remote |
1.3.6.1.4.1.351.150.1.1.1.1.1.22 | cwaChanMCR | 0 | 0 | Minimum cell rate (MCR) for the direction local -> remote |
1.3.6.1.4.1.351.150.1.1.1.1.1.23 | cwaChanSCR | 0 | 0 | Sustainable cell rate (SCR) for the direction local -> remote |
1.3.6.1.4.1.351.150.1.1.1.1.1.24 | cwaChanCDV | 0 | 0 | Maximum tolerable cell delay variation in the direction local -> remote. Setting this parameter to 0xFFFFFF(16777215) indicates t… |
1.3.6.1.4.1.351.150.1.1.1.1.1.25 | cwaChanCTD | 0 | 0 | Maximum tolerable network transfer delay in the direction local -> remote. Setting this parameter to 0xFFFF(65535) indicates to t… |
1.3.6.1.4.1.351.150.1.1.1.1.1.26 | cwaChanMBS | 0 | 0 | Maximum Burst Size (MBS) used in the direction local -> remote |
1.3.6.1.4.1.351.150.1.1.1.1.1.27 | cwaChanCDVT | 0 | 0 | Cell delay variation tolerance(CDVT) used in the direction local -> remote. Setting this parameter to 0xFFFFFFFF(4294967295) indi… |
1.3.6.1.4.1.351.150.1.1.1.1.1.28 | cwaChanPercentUtil | 0 | 0 | This factor provides a per connection control for overbooking bandwidth. This is used in conjunction with the VSI interface polic… |
1.3.6.1.4.1.351.150.1.1.1.1.1.29 | cwaChanRemotePCR | 0 | 0 | Peak cell rate (PCR) for the direction remote -> local. If the object 'cwaChanP2MP' is set to 'true', this object should not be '… |
1.3.6.1.4.1.351.150.1.1.1.1.1.30 | cwaChanRemoteMCR | 0 | 0 | Minimum cell rate for the direction remote -> local |
1.3.6.1.4.1.351.150.1.1.1.1.1.31 | cwaChanRemoteSCR | 0 | 0 | Sustainable cell rate for the direction remote -> local |
1.3.6.1.4.1.351.150.1.1.1.1.1.32 | cwaChanRemoteCDV | 0 | 0 | Maximum tolerable cell delay variation for the direction remote -> local. Setting this parameter to 0xFFFFFF(16777215) indicates … |
1.3.6.1.4.1.351.150.1.1.1.1.1.33 | cwaChanRemoteCTD | 0 | 0 | Maximum tolerable network transfer delay in the direction direction remote -> local. Setting this parameter to 0xFFFF(65535) indi… |
1.3.6.1.4.1.351.150.1.1.1.1.1.34 | cwaChanRemoteMBS | 0 | 0 | Maximum Burst Size (MBS) used in the direction remote -> local. If the object 'cwaChanP2MP' is set to 'true', this object should … |
1.3.6.1.4.1.351.150.1.1.1.1.1.35 | cwaChanRemoteCDVT | 0 | 0 | Cell delay variation tolerance(CDVT) used in the direction remote -> local. Setting this parameter to 0xFFFFFFFF(4294967295) indi… |
1.3.6.1.4.1.351.150.1.1.1.1.1.36 | cwaChanRemotePercentUtil | 0 | 0 | This factor provides a per connection control for overbooking bandwidth. This is used in conjunction with the VSI interface polic… |
1.3.6.1.4.1.351.150.1.1.1.1.1.37 | cwaChanAbrICR | 0 | 0 | Initial cell rate: Rate at which a source should send initially after an idle period. The value must not be larger than the PCR |
1.3.6.1.4.1.351.150.1.1.1.1.1.38 | cwaChanAbrADTF | 0 | 0 | ACR Decrease Time Factor. This is the time permitted between sending RM-cells (Resource Mangement Cells) before the rate is decre… |
1.3.6.1.4.1.351.150.1.1.1.1.1.39 | cwaChanAbrRDF | 0 | 0 | Rate Decrease Factor: Controls the rate decrease which occurs when backward RM-cells with CI=1 are received. Larger values lead t… |
1.3.6.1.4.1.351.150.1.1.1.1.1.40 | cwaChanAbrRIF | 0 | 0 | Rate Increase Factor: Controls the rate increase which occurs when a backward RM-cell is received with CI=0 and NI=0. Larger valu… |
1.3.6.1.4.1.351.150.1.1.1.1.1.41 | cwaChanAbrNRM | 0 | 0 | Maximum number of cells a source may send for each forward RM-cell |
1.3.6.1.4.1.351.150.1.1.1.1.1.42 | cwaChanAbrTRM | 0 | 0 | Upper bound on the time between forward RM-cells for an active source (in milliseconds) |
1.3.6.1.4.1.351.150.1.1.1.1.1.43 | cwaChanAbrCDF | 0 | 0 | Cutoff Decrease Factor: Controls the rate decrease associated with lost or delayed backward RM cells. Larger values result in fas… |
1.3.6.1.4.1.351.150.1.1.1.1.1.44 | cwaChanAbrFRTT | 0 | 0 | Fixed round trip time: Sum of the fixed propagation delays from the source to a destination network. |
1.3.6.1.4.1.351.150.1.1.1.1.1.45 | cwaChanAbrTBE | 0 | 0 | Transient Buffer Exposure. This is a negotiated number of cells that the network would like to limit the source to sending during… |
1.3.6.1.4.1.351.150.1.1.1.1.1.46 | cwaChanAbrERS | 0 | 0 | Configuration of an endpoint for Explicit Rate Stamping. Refer the Textual convention for possible values |
1.3.6.1.4.1.351.150.1.1.1.1.1.47 | cwaChanAbrVSVDEnable | 0 | 0 | Abr connections require close loop control to limit the transmission rate, depending on the network bandwidth. Now this close loo… |
1.3.6.1.4.1.351.150.1.1.1.1.1.48 | cwaChanRowStatus | 0 | 0 | This object is used to create, modify or delete an entry in the ciscoWanAtmChanTable. * A row may be created using the 'CreateAnd… |
1.3.6.1.4.1.351.150.1.1.1.1.1.49 | cwaChanIntAbrVSVD | 0 | 0 | This object is used for enabling/disabling VSVD internal to a segment i.e the closed loop control is in effect between the two pr… |
1.3.6.1.4.1.351.150.1.1.1.1.1.50 | cwaChanExtAbrVSVD | 0 | 0 | This object is used for enabling/disabling VSVD external to the segment which hosts the two endpoints of the SPVC i.e the closed … |
1.3.6.1.4.1.351.150.1.1.1.1.1.51 | cwaChanAisIWCapability | 0 | 0 | This object is used for achieving OAM inter-operability between switches that cannot generate/detect segment AIS cells. This attr… |
1.3.6.1.4.1.351.150.1.1.1.1.1.52 | cwaChanCLR | 0 | 0 | Encoded value representing the maximum tolerable cell loss ratio in the direction local -> remote. The actual CLR value is deriv… |
1.3.6.1.4.1.351.150.1.1.1.1.1.53 | cwaChanRemoteCLR | 0 | 0 | Encoded value representing the maximum tolerable cell loss ratio in the direction remote -> local. The actual CLR value is deriv… |
1.3.6.1.4.1.351.150.1.1.1.1.1.54 | cwaChanOamSegEpEnable | 0 | 0 | This object controls the setting / resetting of the OAM segment endpoint. When set to OamSegEp (1), the SPVC endpoint would termi… |
1.3.6.1.4.1.351.150.1.1.1.1.1.55 | cwaChanSlaveType | 0 | 0 | This object indicates whether a master endpoint has a persistent slave or not. A connection with a master and a non-persistent sl… |
1.3.6.1.4.1.351.150.1.1.1.1.1.56 | cwaChanRoutingPriority | 0 | 0 | This object is the routing priority of the connection. When adding the connection, a default routing priority of 8 is used if thi… |
1.3.6.1.4.1.351.150.1.1.1.1.1.57 | cwaChanP2MP | 0 | 0 | This is used by the administrator to configure this master endpoint to be the root of a point-to-multipoint connection. When this … |
1.3.6.1.4.1.351.150.1.1.1.1.1.58 | cwaChanPrefRouteId | 0 | 0 | This object serves to to associate a preferred route with a connection. The value '0' means no preferred route is associated with… |
1.3.6.1.4.1.351.150.1.1.1.1.1.59 | cwaChanDirectRoute | 0 | 0 | This object serves to associate a prefer route as directed route (correspond to the prefer route object cwaChanPrefRouteId). A di… |