Peak cell rate (PCR) for the direction local -> remote
Parsed from file CISCO-WAN-ATM-CONN-MIB.mib
Module: CISCO-WAN-ATM-CONN-MIB
Peak cell rate (PCR) for the direction local -> remote
Peak cell rate (PCR) for the direction local -> remote
Parsed from file CISCO-WAN-ATM-CONN-MIB.my.txt
Company: None
Module: CISCO-WAN-ATM-CONN-MIB
Peak cell rate (PCR) for the direction local -> remote
cwaChanPCR OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "cells per second" MAX-ACCESS read-create STATUS current DESCRIPTION "Peak cell rate (PCR) for the direction local -> remote" ::= { cwAtmChanCnfgEntry 21 }
cwaChanPCR OBJECT-TYPE SYNTAX Gauge(0..4294967295) ACCESS read-write STATUS mandatory DESCRIPTION "Peak cell rate (PCR) for the direction local -> remote" ::= { cwAtmChanCnfgEntry 21 }
Vendor: Stratacom
Module: CISCO-WAN-ATM-CONN-MIB
[Automatically extracted from oidview.com]
cwaChanPCR OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "cells per second" MAX-ACCESS read-create STATUS current DESCRIPTION "Peak cell rate (PCR) for the direction local -> remote" ::= { cwAtmChanCnfgEntry 21 }
cwaChanPCR OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "cells per second" MAX-ACCESS read-create STATUS current DESCRIPTION "Peak cell rate (PCR) for the direction local -> remote" ::= { cwAtmChanCnfgEntry 21 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.150.1.1.1.1.1.1 | cwaChanVpi | 0 | 0 | The VPI value of a VP or VC connection. The cwaChanVpcFlag serves to distinguish if this is a VP/VC connection |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.2 | cwaChanVci | 0 | 0 | The VCI value of VC connection. The cwaChanVpcFlag serves to distinguish if this is a VP/VC connection. For a VPC, the VCI is irr… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.3 | cwaChanServiceCategory | 0 | 0 | This object identifies the service type to which this connection belongs. The service type specified is one among the ATM forum s… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.4 | cwaChanVpcFlag | 0 | 0 | This object indentifies if the endpoint is a VP/VC endpoint. For a VPC, this object is set to true(1); For a VCC, this object is … |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.5 | cwaChanIdentifier | 0 | 0 | This number represents a RESOURCE at the switch that has been assigned for this connection (identified by ifIndex, cwaChanVpi and… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.6 | cwaChanUploadCounter | 0 | 0 | This counter tracks the number of configuration changes that happen on a specific endpoint (identified by ifIndex, cwaChanVpi, an… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.7 | cwaChanStatsEnable | 0 | 0 | Limits imposed by software or hardware implementations could restrict the amount of statistical data that can be maintained in a … |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.8 | cwaChanCCEnable | 0 | 0 | This object serves to enable or disable continuity check(CC) on a connection endpoint. When continuity check is enabled on an end… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.9 | cwaChanLocalVpi | 0 | 0 | This object identifies the internal VPI assigned to a local endpoint, by the switch. The cwaChanLocalVpi, cwaChanLocalVci and the… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.10 | cwaChanLocalVci | 0 | 0 | This object identifies the internal VCI assigned to a local endpoint, by the switch. The cwaChanLocalVpi, cwaChanLocalVci and the… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.11 | cwaChanLocalNSAPAddr | 0 | 0 | This object identifies the internal NSAP assigned to a local endpoint, by the switch. The cwaChanLocalVpi, cwaChanLocalVci and th… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.12 | cwaChanRemoteVpi | 0 | 0 | This object identifies the VPI of the peer endpoint. The cwaChanRemoteVpi, cwaChanRemoteVpi and the cwaChanRemoteNSAPAddr, identi… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.13 | cwaChanRemoteVci | 0 | 0 | This object identifies the VCI of the peer endpoint. The cwaChanRemoteVpi, cwaChanRemoteVpi and the cwaChanRemoteNSAPAddr, identi… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.14 | cwaChanRemoteNSAPAddr | 0 | 0 | This object identifies the NSAP of the peer endpoint. The cwaChanRemoteVpi, cwaChanRemoteVpi and the cwaChanRemoteNSAPAddr, ident… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.15 | cwaChanControllerId | 0 | 0 | This object serves to associate an endpoint with a specific controller. Usually resource partitioning makes the association betwe… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.16 | cwaChanRoutingMastership | 0 | 0 | This object, if set to true(1) identifies that this endpoint as the `master' endpoint of the connection. When set to false(2) thi… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.17 | cwaChanMaxCost | 0 | 0 | This object is used by the networking entity to select a route based on administrative weight of possible routes. Administrative … |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.18 | cwaChanReroute | 0 | 0 | This is used by the administrator to trigger the re-routing of the connection. * Rerouting takes effect, when this object is set … |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.19 | cwaChanFrameDiscard | 0 | 0 | When set to true(1), enables the frame discard feature for the connection. This is applicable only to the master endpoint (cwaCha… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.20 | cwaChanOperStatus | 0 | 0 | Reflects operational status of an endpoint. * This object is set to operFail(2), if the connection is not routed or if the endpoi… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.22 | cwaChanMCR | 0 | 0 | Minimum cell rate (MCR) for the direction local -> remote |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.23 | cwaChanSCR | 0 | 0 | Sustainable cell rate (SCR) for the direction local -> remote |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.24 | cwaChanCDV | 0 | 0 | Maximum tolerable cell delay variation in the direction local -> remote. Setting this parameter to 0xFFFFFF(16777215) indicates t… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.25 | cwaChanCTD | 0 | 0 | Maximum tolerable network transfer delay in the direction local -> remote. Setting this parameter to 0xFFFF(65535) indicates to t… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.26 | cwaChanMBS | 0 | 0 | Maximum Burst Size (MBS) used in the direction local -> remote |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.27 | cwaChanCDVT | 0 | 0 | Cell delay variation tolerance(CDVT) used in the direction local -> remote. Setting this parameter to 0xFFFFFFFF(4294967295) indi… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.28 | cwaChanPercentUtil | 0 | 0 | This factor provides a per connection control for overbooking bandwidth. This is used in conjunction with the VSI interface polic… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.29 | cwaChanRemotePCR | 0 | 0 | Peak cell rate (PCR) for the direction remote -> local. If the object 'cwaChanP2MP' is set to 'true', this object should not be '… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.30 | cwaChanRemoteMCR | 0 | 0 | Minimum cell rate for the direction remote -> local |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.31 | cwaChanRemoteSCR | 0 | 0 | Sustainable cell rate for the direction remote -> local |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.32 | cwaChanRemoteCDV | 0 | 0 | Maximum tolerable cell delay variation for the direction remote -> local. Setting this parameter to 0xFFFFFF(16777215) indicates … |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.33 | cwaChanRemoteCTD | 0 | 0 | Maximum tolerable network transfer delay in the direction direction remote -> local. Setting this parameter to 0xFFFF(65535) indi… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.34 | cwaChanRemoteMBS | 0 | 0 | Maximum Burst Size (MBS) used in the direction remote -> local. If the object 'cwaChanP2MP' is set to 'true', this object should … |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.35 | cwaChanRemoteCDVT | 0 | 0 | Cell delay variation tolerance(CDVT) used in the direction remote -> local. Setting this parameter to 0xFFFFFFFF(4294967295) indi… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.36 | cwaChanRemotePercentUtil | 0 | 0 | This factor provides a per connection control for overbooking bandwidth. This is used in conjunction with the VSI interface polic… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.37 | cwaChanAbrICR | 0 | 0 | Initial cell rate: Rate at which a source should send initially after an idle period. The value must not be larger than the PCR |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.38 | cwaChanAbrADTF | 0 | 0 | ACR Decrease Time Factor. This is the time permitted between sending RM-cells (Resource Mangement Cells) before the rate is decre… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.39 | cwaChanAbrRDF | 0 | 0 | Rate Decrease Factor: Controls the rate decrease which occurs when backward RM-cells with CI=1 are received. Larger values lead t… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.40 | cwaChanAbrRIF | 0 | 0 | Rate Increase Factor: Controls the rate increase which occurs when a backward RM-cell is received with CI=0 and NI=0. Larger valu… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.41 | cwaChanAbrNRM | 0 | 0 | Maximum number of cells a source may send for each forward RM-cell |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.42 | cwaChanAbrTRM | 0 | 0 | Upper bound on the time between forward RM-cells for an active source (in milliseconds) |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.43 | cwaChanAbrCDF | 0 | 0 | Cutoff Decrease Factor: Controls the rate decrease associated with lost or delayed backward RM cells. Larger values result in fas… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.44 | cwaChanAbrFRTT | 0 | 0 | Fixed round trip time: Sum of the fixed propagation delays from the source to a destination network. |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.45 | cwaChanAbrTBE | 0 | 0 | Transient Buffer Exposure. This is a negotiated number of cells that the network would like to limit the source to sending during… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.46 | cwaChanAbrERS | 0 | 0 | Configuration of an endpoint for Explicit Rate Stamping. Refer the Textual convention for possible values |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.47 | cwaChanAbrVSVDEnable | 0 | 0 | Abr connections require close loop control to limit the transmission rate, depending on the network bandwidth. Now this close loo… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.48 | cwaChanRowStatus | 0 | 0 | This object is used to create, modify or delete an entry in the ciscoWanAtmChanTable. * A row may be created using the 'CreateAnd… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.49 | cwaChanIntAbrVSVD | 0 | 0 | This object is used for enabling/disabling VSVD internal to a segment i.e the closed loop control is in effect between the two pr… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.50 | cwaChanExtAbrVSVD | 0 | 0 | This object is used for enabling/disabling VSVD external to the segment which hosts the two endpoints of the SPVC i.e the closed … |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.51 | cwaChanAisIWCapability | 0 | 0 | This object is used for achieving OAM inter-operability between switches that cannot generate/detect segment AIS cells. This attr… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.52 | cwaChanCLR | 0 | 0 | Encoded value representing the maximum tolerable cell loss ratio in the direction local -> remote. The actual CLR value is deriv… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.53 | cwaChanRemoteCLR | 0 | 0 | Encoded value representing the maximum tolerable cell loss ratio in the direction remote -> local. The actual CLR value is deriv… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.54 | cwaChanOamSegEpEnable | 0 | 0 | This object controls the setting / resetting of the OAM segment endpoint. When set to OamSegEp (1), the SPVC endpoint would termi… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.55 | cwaChanSlaveType | 0 | 0 | This object indicates whether a master endpoint has a persistent slave or not. A connection with a master and a non-persistent sl… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.56 | cwaChanRoutingPriority | 0 | 0 | This object is the routing priority of the connection. When adding the connection, a default routing priority of 8 is used if thi… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.57 | cwaChanP2MP | 0 | 0 | This is used by the administrator to configure this master endpoint to be the root of a point-to-multipoint connection. When this … |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.58 | cwaChanPrefRouteId | 0 | 0 | This object serves to to associate a preferred route with a connection. The value '0' means no preferred route is associated with… |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.59 | cwaChanDirectRoute | 0 | 0 | This object serves to associate a prefer route as directed route (correspond to the prefer route object cwaChanPrefRouteId). A di… |