The time in milliseconds for the cell loss integration period.
If cells are continuously lost for this period of time,
atmfCESCellLossStatus is set to loss (2). The default
definition is 2500.
AXD301 comment:
Any value will be reduced to the nearest lower multiple of 500.
This column can only be set when the CES is administratively
blocked or during create.
Parsed from file ces.mib.txt
Company: None
Module: TERAWAVE-ces-MIB
The time in milliseconds for the cell loss integration period.
If a cells are continuously lost for this period of time,
atmfCESCellLossStatus is set to loss (2). The
default definition is 2500.
Parsed from file TERAWAVE-ces-MIB.mib
Module: TERAWAVE-ces-MIB
Vendor: ATM Forum
Module: ATMF-CES
[Automatically extracted from oidview.com]
atmfCESCellLossIntegrationPeriod OBJECT-TYPE SYNTAX INTEGER (1000..65535) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { atmfCESConTableEntry 11 }
atmfCESCellLossIntegrationPeriod OBJECT-TYPE SYNTAX INTEGER (1000..65535) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { atmfCESConTableEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.353.5.2.2.1.1.1.1 | atmfCESCbrIndex | 0 | 0 | The value of this object is equal to MIB II's ifIndex value of the CBR interface, channel, or bundle that is being cross-connecte… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.2 | atmfCESAtmIndex | 0 | 0 | The value of this object is equal to MIB II's ifIndex value of the ATM Port interface mapped through this CES IWF to a CBR interf… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.3 | atmfCESAtmVpi | 0 | 0 | The value of this object is equal to the VPI used by the ATM VCL mapped through this CES IWF to a CBR interface. This value is o… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.4 | atmfCESAtmVci | 0 | 0 | The value of this object is equal to the VCI used by the ATM VCL mapped through this CES IWF to a CBR interface. This value is o… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.5 | atmfCESCbrService | 0 | 0 | Define if DSx/Ex service isas structured or unstructurednot. A structured(2) interface is some nx64kbKbps. An unstructured (1) in… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.6 | atmfCESCbrClockMode | 0 | 0 | Define if DSx/Ex service clocking mode. This maps into transmit clock source of CBR interface. For structured modes this value, i… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.7 | atmfCESCas | 0 | 0 | This parameter selects which AAL1 Format should be used: Basic does not carry CAS bits, and uses a single 125 usec frame. e1Cas, … |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.8 | atmfCESPartialFill | 0 | 0 | If partial cell fill is used, the number of user octets per cell must be set with this parameter. Setting this parameter to zero… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.9 | atmfCESBufMaxSize | 0 | 0 | Define maximum size in 10 microsecond increments of the reassembly buffer. Some implementations may want allow the maximum buffer… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.10 | atmfCESCdvRxT, atmfCESCdvtRxT | 0 | 0 | The maximum cell arrival jitter in 10 usec increments that the reassembly process will tolerate in the cell stream without produc… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.12 | atmfCESConnType | 0 | 0 | The type of ATM connectivity between associated CES IWF's. Valid values are: other - none of the types specified below pvc … |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.13 | atmfCESLocalAddr | 0 | 0 | The ATM address of the local CES IWF process. This address may be used by the automatic SVC establishment procedures to identify … |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.14 | atmfCESAdminStatus | 0 | 0 | The desired administrative status of the CES interworking function. The up and down states indicate that the traffic flow is ena… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.15 | atmfCESOperStatus | 0 | 0 | The operational status of the CES interworking function. The up and down states indicate that the traffic flow is enabled or disa… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.16 | atmfCESConfRowStatus, atmCESConfRowStatus | 0 | 0 | This object is used to create new rows in this table, modify existing rows, and to delete existing rows. |