Define if DSx/Ex service clocking mode. This maps into
transmit clock source of CBR interface.
For structured modes this value, if present, must be set to
synchronous(1).
AXD301 comment:
Only synchronous(1) is supported for 2.048 Mbps CE Links.
For 44.736 Mbps CE Links, synchronous(1) and srts(2) are supported.
Parsed from file ces.mib.txt
Company: None
Module: TERAWAVE-ces-MIB
Define if DSx/Ex service clocking mode. This maps into
transmit clock source of CBR interface.
For structured modes this value, if present, must be set to
synchronous(1).
Parsed from file TERAWAVE-ces-MIB.mib
Module: TERAWAVE-ces-MIB
Vendor: ATM Forum
Module: ATMF-CES
[Automatically extracted from oidview.com]
atmfCESCbrClockMode OBJECT-TYPE SYNTAX INTEGER { synchronous(1), srts(2), adaptive(3), looped(4) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { atmfCESConTableEntry 6 }
atmfCESCbrClockMode OBJECT-TYPE SYNTAX INTEGER { synchronous(1), srts(2), adaptive(3), looped(4) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { atmfCESConTableEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.353.5.2.2.1.1.1.1 | atmfCESCbrIndex | 0 | 0 | The value of this object is equal to MIB II's ifIndex value of the CBR interface, channel, or bundle that is being cross-connecte… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.2 | atmfCESAtmIndex | 0 | 0 | The value of this object is equal to MIB II's ifIndex value of the ATM Port interface mapped through this CES IWF to a CBR interf… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.3 | atmfCESAtmVpi | 0 | 0 | The value of this object is equal to the VPI used by the ATM VCL mapped through this CES IWF to a CBR interface. This value is o… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.4 | atmfCESAtmVci | 0 | 0 | The value of this object is equal to the VCI used by the ATM VCL mapped through this CES IWF to a CBR interface. This value is o… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.5 | atmfCESCbrService | 0 | 0 | Define if DSx/Ex service isas structured or unstructurednot. A structured(2) interface is some nx64kbKbps. An unstructured (1) in… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.7 | atmfCESCas | 0 | 0 | This parameter selects which AAL1 Format should be used: Basic does not carry CAS bits, and uses a single 125 usec frame. e1Cas, … |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.8 | atmfCESPartialFill | 0 | 0 | If partial cell fill is used, the number of user octets per cell must be set with this parameter. Setting this parameter to zero… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.9 | atmfCESBufMaxSize | 0 | 0 | Define maximum size in 10 microsecond increments of the reassembly buffer. Some implementations may want allow the maximum buffer… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.10 | atmfCESCdvRxT, atmfCESCdvtRxT | 0 | 0 | The maximum cell arrival jitter in 10 usec increments that the reassembly process will tolerate in the cell stream without produc… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.11 | atmfCESCellLossIntegrationPeriod | 0 | 0 | The time in milliseconds for the cell loss integration period. If a cells are continuously lost for this period of time, atmfCESC… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.12 | atmfCESConnType | 0 | 0 | The type of ATM connectivity between associated CES IWF's. Valid values are: other - none of the types specified below pvc … |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.13 | atmfCESLocalAddr | 0 | 0 | The ATM address of the local CES IWF process. This address may be used by the automatic SVC establishment procedures to identify … |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.14 | atmfCESAdminStatus | 0 | 0 | The desired administrative status of the CES interworking function. The up and down states indicate that the traffic flow is ena… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.15 | atmfCESOperStatus | 0 | 0 | The operational status of the CES interworking function. The up and down states indicate that the traffic flow is enabled or disa… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.16 | atmfCESConfRowStatus, atmCESConfRowStatus | 0 | 0 | This object is used to create new rows in this table, modify existing rows, and to delete existing rows. |