The imaLinkRowStatus object allows create, change, and delete
operations on imaLinkTable entries.
To create a new conceptual row (or instance) of the imaLinkTable,
imaLinkRowStatus must be set to 'createAndWait' or 'createAndGo'.
A successful set of the imaLinkGroupIndex object must be performed
before the imaLinkRowStatus of a new conceptual row can be set to
'active'.
To change (modify) the imaLinkGroupIndex in an imaLinkTable entry,
the imaLinkRowStatus object must first be set to 'notInService'.
Only then can this object in the conceptual row be modified.
This is due to the fact that the imaLinkGroupIndex object provides
the association between a physical IMA link and the IMA group to
which it belongs, and setting the imaLinkGroupIndex object to a
different value has the effect of changing the association between
a physical IMA link and an IMA group. To place the link 'in group',
the imaLinkRowStatus object is set to 'active'. While the row is
not in 'active' state, both the Transmit and Receive IMA link state
machines are in the 'Not In Group' state.
To remove (delete) an imaLinkTable entry from this table, set
this object to 'destroy'.
Parsed from file IMA-MIB.mib
Module: IMA-MIB
The imaLinkRowStatus object allows create, change, and delete
operations on imaLinkTable entries.
To create a new conceptual row (or instance) of the imaLinkTable,
imaLinkRowStatus must be set to 'createAndWait' or 'createAndGo'.
A successful set of the imaLinkGroupIndex object must be performed
before the imaLinkRowStatus of a new conceptual row can be set to
'active'.
To change (modify) the imaLinkGroupIndex in an imaLinkTable entry,
the imaLinkRowStatus object must first be set to 'notInService'.
Only then can this object in the conceptual row be modified.
This is due to the fact that the imaLinkGroupIndex object provides
the association between a physical IMA link and the IMA group to
which it belongs, and setting the imaLinkGroupIndex object to a
different value has the effect of changing the association between
a physical IMA link and an IMA group. To place the link 'in group',
the imaLinkRowStatus object is set to 'active'. While the row is
not in 'active' state, both the Transmit and Receive IMA link state
machines are in the 'Not In Group' state.
To remove (delete) an imaLinkTable entry from this table, set
this object to 'destroy'.
The imaLinkRowStatus object allows create, change and delete
operations on imaLinkTable entries.
To create a new conceptual row (or instance) of the imaLinkTable,
imaLinkRowStatus must be set to 'createAndWait' or 'createAndGo.'
A successful set of the object imaLinkGroupIndex must be
performed before the RowStatus of this new row can transition
to the 'Active' state. The imaLinkGroupIndex provides the
association between a physical IMA link to an IMA group.
To change (modify) an imaLinkTable entry, the imaLinkRowStatus
object must be set to 'notInService'. Only then can the
conceptual row be changed. Setting object imaLinkGroupIndex to
a different value has the effect of changing the association
between a physical IMA link and an IMA group. To place the
link 'in group', the imaLinkRowStatus object is set to 'Active'.
While the row is not in 'Active' state, both the Transmit and
Receive IMA state machines are in the 'Not In Group' state.
To remove (delete) an imaLinkTable entry from this table, set
this object to 'destroy.'
A network manager may elect to perform a delete operation
followed immediately by a create operation instead of a
modify operation. The net effect of the delete/create is to
re-instantiate (reset) agent counters defined in this table.
Parsed from file ima.mib.txt
Company: None
Module: IMA-MIB
The imaLinkRowStatus object allows create, change, and delete
operations on imaLinkTable entries.
To create a new conceptual row (or instance) of the imaLinkTable,
imaLinkRowStatus must be set to 'createAndWait' or 'createAndGo'.
A successful set of the imaLinkGroupIndex object must be performed
before the imaLinkRowStatus of a new conceptual row can be set to
'active'.
To change (modify) the imaLinkGroupIndex in an imaLinkTable entry,
the imaLinkRowStatus object must first be set to 'notInService'.
Only then can this object in the conceptual row be modified.
This is due to the fact that the imaLinkGroupIndex object provides
the association between a physical IMA link and the IMA group to
which it belongs, and setting the imaLinkGroupIndex object to a
different value has the effect of changing the association between
a physical IMA link and an IMA group. To place the link 'in group',
the imaLinkRowStatus object is set to 'active'. While the row is
not in 'active' state, both the Transmit and Receive IMA link state
machines are in the 'Not In Group' state.
To remove (delete) an imaLinkTable entry from this table, set
this object to 'destroy'.
imaLinkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The imaLinkRowStatus object allows create, change, and delete operations on imaLinkTable entries. To create a new conceptual row (or instance) of the imaLinkTable, imaLinkRowStatus must be set to 'createAndWait' or 'createAndGo'. A successful set of the imaLinkGroupIndex object must be performed before the imaLinkRowStatus of a new conceptual row can be set to 'active'. To change (modify) the imaLinkGroupIndex in an imaLinkTable entry, the imaLinkRowStatus object must first be set to 'notInService'. Only then can this object in the conceptual row be modified. This is due to the fact that the imaLinkGroupIndex object provides the association between a physical IMA link and the IMA group to which it belongs, and setting the imaLinkGroupIndex object to a different value has the effect of changing the association between a physical IMA link and an IMA group. To place the link 'in group', the imaLinkRowStatus object is set to 'active'. While the row is not in 'active' state, both the Transmit and Receive IMA link state machines are in the 'Not In Group' state. To remove (delete) an imaLinkTable entry from this table, set this object to 'destroy'." ::= { imaLinkEntry 2 }
imaLinkRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The imaLinkRowStatus object allows create, change, and delete operations on imaLinkTable entries. To create a new conceptual row (or instance) of the imaLinkTable, imaLinkRowStatus must be set to 'createAndWait' or 'createAndGo'. A successful set of the imaLinkGroupIndex object must be performed before the imaLinkRowStatus of a new conceptual row can be set to 'active'. To change (modify) the imaLinkGroupIndex in an imaLinkTable entry, the imaLinkRowStatus object must first be set to 'notInService'. Only then can this object in the conceptual row be modified. This is due to the fact that the imaLinkGroupIndex object provides the association between a physical IMA link and the IMA group to which it belongs, and setting the imaLinkGroupIndex object to a different value has the effect of changing the association between a physical IMA link and an IMA group. To place the link 'in group', the imaLinkRowStatus object is set to 'active'. While the row is not in 'active' state, both the Transmit and Receive IMA link state machines are in the 'Not In Group' state. To remove (delete) an imaLinkTable entry from this table, set this object to 'destroy'." ::= { imaLinkEntry 2 }
Vendor: ATM Forum
Module: Axd301Ima-SWS
[Automatically extracted from oidview.com]
imaLinkRowStatus OBJECT-TYPE SYNTAX INTEGER { create (1), modify (2), delete (3), active (4), notActive (5) } ACCESS read-write STATUS mandatory DESCRIPTION "The imaLinkRowStatus object allows create, change and delete operations on imaLinkTable entries. To create a new conceptual row (or instance) of the imaLinkTable, imaLinkRowStatus must be set to 'createAndWait' or 'createAndGo.' A successful set of the object imaLinkGroupIndex must be performed before the RowStatus of this new row can transition to the 'Active' state. The imaLinkGroupIndex provides the association between a physical IMA link to an IMA group. To change (modify) an imaLinkTable entry, the imaLinkRowStatus object must be set to 'notInService'. Only then can the conceptual row be changed. Setting object imaLinkGroupIndex to a different value has the effect of changing the association between a physical IMA link and an IMA group. To place the link 'in group', the imaLinkRowStatus object is set to 'Active'. While the row is not in 'Active' state, both the Transmit and Receive IMA state machines are in the 'Not In Group' state. To remove (delete) an imaLinkTable entry from this table, set this object to 'destroy.' A network manager may elect to perform a delete operation followed immediately by a create operation instead of a modify operation. The net effect of the delete/create is to re-instantiate (reset) agent counters defined in this table." ::= { imaLinkEntry 2 }
imaLinkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The imaLinkRowStatus object allows create, change, and delete operations on imaLinkTable entries. To create a new conceptual row (or instance) of the imaLinkTable, imaLinkRowStatus must be set to 'createAndWait' or 'createAndGo'. A successful set of the imaLinkGroupIndex object must be performed before the imaLinkRowStatus of a new conceptual row can be set to 'active'. To change (modify) the imaLinkGroupIndex in an imaLinkTable entry, the imaLinkRowStatus object must first be set to 'notInService'. Only then can this object in the conceptual row be modified. This is due to the fact that the imaLinkGroupIndex object provides the association between a physical IMA link and the IMA group to which it belongs, and setting the imaLinkGroupIndex object to a different value has the effect of changing the association between a physical IMA link and an IMA group. To place the link 'in group', the imaLinkRowStatus object is set to 'active'. While the row is not in 'active' state, both the Transmit and Receive IMA link state machines are in the 'Not In Group' state. To remove (delete) an imaLinkTable entry from this table, set this object to 'destroy'." ::= { imaLinkEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.353.5.7.1.1.4.1.1 | imaLinkIfIndex | 0 | 0 | This corresponds to the 'ifIndex' of the MIB-II interface on which this link is established. This object also corresponds to the … |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.3 | imaLinkGroupIndex | 0 | 0 | The value which identifies the IMA group (imaGroupIndex) of which this link is a member. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.4 | imaLinkNeTxState | 0 | 0 | The current state of the near-end transmit link. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.5 | imaLinkNeRxState | 0 | 0 | The current state of the near-end receive link. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.6 | imaLinkFeTxState | 0 | 0 | The current state of the far-end transmit link as reported via ICP cells. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.7 | imaLinkFeRxState | 0 | 0 | The current state of the far-end receive link as reported via ICP cells. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.8 | imaLinkNeRxFailureStatus | 0 | 0 | The current link failure status of the near-end receive link. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.9 | imaLinkFeRxFailureStatus | 0 | 0 | The current link failure status of the far-end receive link as reported via ICP cells. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.10 | imaLinkTxLid | 0 | 0 | The outgoing LID used currently on the link by the local end. This value has meaning only if the link belongs to an IMA group. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.11 | imaLinkRxLid | 0 | 0 | The incoming LID used currently on the link by the remote end as reported via ICP cells. This value has meaning only if the link … |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.12 | imaLinkRelDelay | 0 | 0 | The latest measured delay on this link relative to the link, in the same IMA group, with the least delay. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.13 | imaLinkImaViolations | 0 | 0 | ICP violations: count of errored, invalid or missing ICP cells during non-SES-IMA condition. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.14 | imaLinkOifAnomalies | 0 | 0 | The number of OIF anomalies during non-SES-IMA condition at the near-end. This is an optional attribute. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.15 | imaLinkNeSevErroredSecs | 0 | 0 | Count of one second intervals containing several IV-IMA, or one or more link defects (e.g., LOS, OOF/LOF, AIS, LCD), LIF, LODS de… |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.16 | imaLinkFeSevErroredSecs | 0 | 0 | Count of one second intervals containing one or more RDI-IMA defects. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.17 | imaLinkNeUnavailSecs | 0 | 0 | Count of unavailable seconds at near-end: unavailability begins at the onset of 10 contiguous SES-IMA and ends at the onset of 10… |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.18 | imaLinkFeUnavailSecs | 0 | 0 | Count of unavailable seconds at far-end: unavailability begins at the onset of 10 contiguous SES-IMA-FE and ends at the onset of… |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.19 | imaLinkNeTxUnusableSecs | 0 | 0 | Tx Unusable seconds: count of Unusable seconds at the near end Tx LSM. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.20 | imaLinkNeRxUnusableSecs | 0 | 0 | Rx Unusable seconds: count of Unusable seconds at the near end Rx LSM. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.21 | imaLinkFeTxUnusableSecs | 0 | 0 | Tx Unusable seconds at far-end: count of seconds with Unusable indications from the far-end Tx LSM. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.22 | imaLinkFeRxUnusableSecs | 0 | 0 | Rx Unusable seconds at far-end: count of seconds with Unusable indications from the far-end Rx LSM. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.23 | imaLinkNeTxNumFailures | 0 | 0 | The number of times a near-end transmit failure alarm condition has been entered on this link. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.24 | imaLinkNeRxNumFailures | 0 | 0 | The number of times a near-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, Mis-Connected, RDI… |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.25 | imaLinkFeTxNumFailures | 0 | 0 | The number of times a far-end transmit failure alarm condition has been entered on this link. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.26 | imaLinkFeRxNumFailures | 0 | 0 | The number of times a far-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, Mis-Connected, RDI-… |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.27 | imaLinkTxStuffs | 0 | 0 | Counts of stuff events inserted in the transmit direction. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.28 | imaLinkRxStuffs | 0 | 0 | Counts of stuff events detected in the receive direction. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.29 | imaLinkRxTestPattern | 0 | 0 | This object identifies the test pattern received in the ICP Cell (octet 17) on the link during the IMA Test Pattern Procedure. Th… |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.30 | imaLinkTestProcStatus | 0 | 0 | This value indicates the current state of the Test Pattern Procedure. If the value is disabled(1), the test is not running. A val… |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.31 | imaLinkValidIntervals | 0 | 0 | The number of previous 15 minute intervals for which valid data was collected. The value will be 96 unless the IMA group table e… |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.32 | imaLinkInvalidIntervals | 0 | 0 | The number of intervals for which no valid data is available. |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.33 | imaLinkTimeElapsed | 0 | 0 | The number of of seconds that hnave elapsed since the beginning of the current measurement period. |