This value indicates the current state of the Test Pattern
Procedure. If the value is disabled(1), the test is not
running. A value of operating(2) means the test is running
and no error has been found on this interface. A value of
linkFail(3) means an error has been detected on this link
during the test.
Once an error is detected, the linkFail(3) value is latched until
either this object is read or until the imaGroupTestProcStatus
is moved to disabled(1). Once read, if the error no longer
persists, a subsequent read will report the value operating(2).
Parsed from file IMA-MIB.mib
Module: IMA-MIB
This value indicates the current state of the Test Pattern
Procedure. If the value is disabled(1), the test is not
running. A value of operating(2) means the test is running
and no error has been found on this interface. A value of
linkFail(3) means an error has been detected on this link
during the test.
Once an error is detected, the linkFail(3) value is latched until
either this object is read or until the imaGroupTestProcStatus
is moved to disabled(1). Once read, if the error no longer
persists, a subsequent read will report the value operating(2).
This value indicates the current state of the Test Pattern
Procedure. If the value is disabled(1), the test is not
running. A value of operating(2) means the test is running
and no error has been found on this interface. A value of
linkfail(3) means an error has been detected on this link
during the test.
Once an error occurs, the linkfail(3) value is latched until
either this object is read or until the imaGroupTestProcStatus
is moved to disabled(1). Once read, if the error no longer
persists, a subsequent read will report the value operating(2).
Parsed from file ima.mib.txt
Company: None
Module: IMA-MIB
This value indicates the current state of the Test Pattern
Procedure. If the value is disabled(1), the test is not
running. A value of operating(2) means the test is running
and no error has been found on this interface. A value of
linkFail(3) means an error has been detected on this link
during the test.
Once an error is detected, the linkFail(3) value is latched until
either this object is read or until the imaGroupTestProcStatus
is moved to disabled(1). Once read, if the error no longer
persists, a subsequent read will report the value operating(2).
imaLinkTestProcStatus OBJECT-TYPE SYNTAX ImaTestProcStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the current state of the Test Pattern Procedure. If the value is disabled(1), the test is not running. A value of operating(2) means the test is running and no error has been found on this interface. A value of linkFail(3) means an error has been detected on this link during the test. Once an error is detected, the linkFail(3) value is latched until either this object is read or until the imaGroupTestProcStatus is moved to disabled(1). Once read, if the error no longer persists, a subsequent read will report the value operating(2)." ::= { imaLinkEntry 30 }
imaLinkTestProcStatus OBJECT-TYPE SYNTAX ImaTestProcStatus ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the current state of the Test Pattern Procedure. If the value is disabled(1), the test is not running. A value of operating(2) means the test is running and no error has been found on this interface. A value of linkFail(3) means an error has been detected on this link during the test. Once an error is detected, the linkFail(3) value is latched until either this object is read or until the imaGroupTestProcStatus is moved to disabled(1). Once read, if the error no longer persists, a subsequent read will report the value operating(2)." ::= { imaLinkEntry 30 }
Vendor: ATM Forum
Module: Axd301Ima-SWS
[Automatically extracted from oidview.com]
imaLinkTestProcStatus OBJECT-TYPE SYNTAX ImaTestProcStatus ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the current state of the Test Pattern Procedure. If the value is disabled(1), the test is not running. A value of operating(2) means the test is running and no error has been found on this interface. A value of linkfail(3) means an error has been detected on this link during the test. Once an error occurs, the linkfail(3) value is latched until either this object is read or until the imaGroupTestProcStatus is moved to disabled(1). Once read, if the error no longer persists, a subsequent read will report the value operating(2)." ::= { imaLinkEntry 30 }
imaLinkTestProcStatus OBJECT-TYPE SYNTAX ImaTestProcStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the current state of the Test Pattern Procedure. If the value is disabled(1), the test is not running. A value of operating(2) means the test is running and no error has been found on this interface. A value of linkFail(3) means an error has been detected on this link during the test. Once an error is detected, the linkFail(3) value is latched until either this object is read or until the imaGroupTestProcStatus is moved to disabled(1). Once read, if the error no longer persists, a subsequent read will report the value operating(2)." ::= { imaLinkEntry 30 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.353.5.7.1.1.4.1.1 | imaLinkIfIndex | 0 | 0 | This corresponds to the 'ifIndex' of the MIB-II interface on which this link is established. This object also corresponds to the … |
1.3.6.1.4.1.353.5.7.1.1.4.1.2 | imaLinkRowStatus | 0 | 0 | The imaLinkRowStatus object allows create, change, and delete operations on imaLinkTable entries. To create a new conceptual row … |
1.3.6.1.4.1.353.5.7.1.1.4.1.3 | imaLinkGroupIndex | 0 | 0 | The value which identifies the IMA group (imaGroupIndex) of which this link is a member. |
1.3.6.1.4.1.353.5.7.1.1.4.1.4 | imaLinkNeTxState | 0 | 0 | The current state of the near-end transmit link. |
1.3.6.1.4.1.353.5.7.1.1.4.1.5 | imaLinkNeRxState | 0 | 0 | The current state of the near-end receive link. |
1.3.6.1.4.1.353.5.7.1.1.4.1.6 | imaLinkFeTxState | 0 | 0 | The current state of the far-end transmit link as reported via ICP cells. |
1.3.6.1.4.1.353.5.7.1.1.4.1.7 | imaLinkFeRxState | 0 | 0 | The current state of the far-end receive link as reported via ICP cells. |
1.3.6.1.4.1.353.5.7.1.1.4.1.8 | imaLinkNeRxFailureStatus | 0 | 0 | The current link failure status of the near-end receive link. |
1.3.6.1.4.1.353.5.7.1.1.4.1.9 | imaLinkFeRxFailureStatus | 0 | 0 | The current link failure status of the far-end receive link as reported via ICP cells. |
1.3.6.1.4.1.353.5.7.1.1.4.1.10 | imaLinkTxLid | 0 | 0 | The outgoing LID used currently on the link by the local end. This value has meaning only if the link belongs to an IMA group. |
1.3.6.1.4.1.353.5.7.1.1.4.1.11 | imaLinkRxLid | 0 | 0 | The incoming LID used currently on the link by the remote end as reported via ICP cells. This value has meaning only if the link … |
1.3.6.1.4.1.353.5.7.1.1.4.1.12 | imaLinkRelDelay | 0 | 0 | The latest measured delay on this link relative to the link, in the same IMA group, with the least delay. |
1.3.6.1.4.1.353.5.7.1.1.4.1.13 | imaLinkImaViolations | 0 | 0 | ICP violations: count of errored, invalid or missing ICP cells during non-SES-IMA condition. |
1.3.6.1.4.1.353.5.7.1.1.4.1.14 | imaLinkOifAnomalies | 0 | 0 | The number of OIF anomalies during non-SES-IMA condition at the near-end. This is an optional attribute. |
1.3.6.1.4.1.353.5.7.1.1.4.1.15 | imaLinkNeSevErroredSecs | 0 | 0 | Count of one second intervals containing several IV-IMA, or one or more link defects (e.g., LOS, OOF/LOF, AIS, LCD), LIF, LODS de… |
1.3.6.1.4.1.353.5.7.1.1.4.1.16 | imaLinkFeSevErroredSecs | 0 | 0 | Count of one second intervals containing one or more RDI-IMA defects. |
1.3.6.1.4.1.353.5.7.1.1.4.1.17 | imaLinkNeUnavailSecs | 0 | 0 | Count of unavailable seconds at near-end: unavailability begins at the onset of 10 contiguous SES-IMA and ends at the onset of 10… |
1.3.6.1.4.1.353.5.7.1.1.4.1.18 | imaLinkFeUnavailSecs | 0 | 0 | Count of unavailable seconds at far-end: unavailability begins at the onset of 10 contiguous SES-IMA-FE and ends at the onset of… |
1.3.6.1.4.1.353.5.7.1.1.4.1.19 | imaLinkNeTxUnusableSecs | 0 | 0 | Tx Unusable seconds: count of Unusable seconds at the near end Tx LSM. |
1.3.6.1.4.1.353.5.7.1.1.4.1.20 | imaLinkNeRxUnusableSecs | 0 | 0 | Rx Unusable seconds: count of Unusable seconds at the near end Rx LSM. |
1.3.6.1.4.1.353.5.7.1.1.4.1.21 | imaLinkFeTxUnusableSecs | 0 | 0 | Tx Unusable seconds at far-end: count of seconds with Unusable indications from the far-end Tx LSM. |
1.3.6.1.4.1.353.5.7.1.1.4.1.22 | imaLinkFeRxUnusableSecs | 0 | 0 | Rx Unusable seconds at far-end: count of seconds with Unusable indications from the far-end Rx LSM. |
1.3.6.1.4.1.353.5.7.1.1.4.1.23 | imaLinkNeTxNumFailures | 0 | 0 | The number of times a near-end transmit failure alarm condition has been entered on this link. |
1.3.6.1.4.1.353.5.7.1.1.4.1.24 | imaLinkNeRxNumFailures | 0 | 0 | The number of times a near-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, Mis-Connected, RDI… |
1.3.6.1.4.1.353.5.7.1.1.4.1.25 | imaLinkFeTxNumFailures | 0 | 0 | The number of times a far-end transmit failure alarm condition has been entered on this link. |
1.3.6.1.4.1.353.5.7.1.1.4.1.26 | imaLinkFeRxNumFailures | 0 | 0 | The number of times a far-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, Mis-Connected, RDI-… |
1.3.6.1.4.1.353.5.7.1.1.4.1.27 | imaLinkTxStuffs | 0 | 0 | Counts of stuff events inserted in the transmit direction. |
1.3.6.1.4.1.353.5.7.1.1.4.1.28 | imaLinkRxStuffs | 0 | 0 | Counts of stuff events detected in the receive direction. |
1.3.6.1.4.1.353.5.7.1.1.4.1.29 | imaLinkRxTestPattern | 0 | 0 | This object identifies the test pattern received in the ICP Cell (octet 17) on the link during the IMA Test Pattern Procedure. Th… |
1.3.6.1.4.1.353.5.7.1.1.4.1.31 | imaLinkValidIntervals | 0 | 0 | The number of previous 15 minute intervals for which valid data was collected. The value will be 96 unless the IMA group table e… |
1.3.6.1.4.1.353.5.7.1.1.4.1.32 | imaLinkInvalidIntervals | 0 | 0 | The number of intervals for which no valid data is available. |
1.3.6.1.4.1.353.5.7.1.1.4.1.33 | imaLinkTimeElapsed | 0 | 0 | The number of of seconds that hnave elapsed since the beginning of the current measurement period. |