Specifies what types of frames with group destination
addresses are currently being regulated. Only the
specified class of traffic is considered in detecting
the presence of storms, and only this class of traffic
is regulated when a storm is detected. The value
none(1) specifies that storm control is disabled.
The value broadcast(2) specifies that only broadcast
storms are regulated. The value multicast(3) specifies
that only multicast storms are regulated. The value
broadcastAndMulticast specifies that storms involving
a mixture of broadcast and multicast traffic are
regulated.
Parsed from file DEChub900-Switch.mib.txt
Company: None
Module: ESWITCH-MIB-V3-0
Specifies what types of frames with group destination
addresses are currently being regulated. Only the
specified class of traffic is considered in detecting
the presence of storms, and only this class of traffic
is regulated when a storm is detected. The value
none(1) specifies that storm control is disabled.
The value broadcast(2) specifies that only broadcast
storms are regulated. The value multicast(3) specifies
that only multicast storms are regulated. The value
broadcastAndMulticast specifies that storms involving
a mixture of broadcast and multicast traffic are
regulated.
Parsed from file ESWITCH-MIB-V3-0.mib
Module: ESWITCH-MIB-V3-0
Vendor: DEC
Module: ESWITCH-MIB-V3-0
[Automatically extracted from oidview.com]
eSwitchStormFrameTypeRegulated OBJECT-TYPE SYNTAX INTEGER { none(1), broadcast(2), multicast(3), broadcastAndMulticast(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies what types of frames with group destination addresses are currently being regulated. Only the specified class of traffic is considered in detecting the presence of storms, and only this class of traffic is regulated when a storm is detected. The value none(1) specifies that storm control is disabled. The value broadcast(2) specifies that only broadcast storms are regulated. The value multicast(3) specifies that only multicast storms are regulated. The value broadcastAndMulticast specifies that storms involving a mixture of broadcast and multicast traffic are regulated." ::= { eSwitchStorm 1 }
eSwitchStormFrameTypeRegulated OBJECT-TYPE SYNTAX INTEGER { none(1), broadcast(2), multicast(3), broadcastAndMulticast(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies what types of frames with group destination addresses are currently being regulated. Only the specified class of traffic is considered in detecting the presence of storms, and only this class of traffic is regulated when a storm is detected. The value none(1) specifies that storm control is disabled. The value broadcast(2) specifies that only broadcast storms are regulated. The value multicast(3) specifies that only multicast storms are regulated. The value broadcastAndMulticast specifies that storms involving a mixture of broadcast and multicast traffic are regulated." ::= { eSwitchStorm 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.11.7.4.1.0 | eSwitchStormFrameTypeRegulated | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.11.7.4.2 | eSwitchStormPollingInterval | 1 | 1 | The length of the interval in 10 millisecond units between successive instants when the storm control process examines the broadc… |
| 1.3.6.1.4.1.36.2.18.11.7.4.3 | eSwitchStormRateLimit | 1 | 1 | The maximum number of regulated group address frames (broadcast, multicast, or a mixture of both - see eSwitchStormFrameTypeRegul… |
| 1.3.6.1.4.1.36.2.18.11.7.4.4 | eSwitchStormControlAction | 1 | 1 | The action that the storm control process should take when storm conditions are detected on a port. Frame suppression consists of… |
| 1.3.6.1.4.1.36.2.18.11.7.4.5 | eSwitchStormResumptionPolicy | 1 | 1 | The policy used by the storm control process to resume normal operation, once storm control action has been initiated. If continue… |
| 1.3.6.1.4.1.36.2.18.11.7.4.6 | eSwitchStormAutoInterval | 1 | 1 | This parameter is used when the eSwitchStormResumptionPolicy specified is auto -interval(2). Normal operation is automatically res… |
| 1.3.6.1.4.1.36.2.18.11.7.4.7 | eSwitchStormFramesLost | 1 | 1 | The number of regulated frames (broadcast, multicast or both, depending on the value of the object: eSwitchStormFrameTypeRegulate… |
| 1.3.6.1.4.1.36.2.18.11.7.4.8 | eSwitchStormActionsInitiated | 1 | 1 | The number of times that storm control action was initiated on any port on the switch. |
| 1.3.6.1.4.1.36.2.18.11.7.4.9 | eSwitchStormPortTable | 1 | 5 | A table that contains storm status information for every port on the switch. |