The action that the storm control process should take
when storm conditions are detected on a port. Frame
suppression consists of suspending the forwarding
of regulated frames (broadcast, multicast, or
both, depending on the value of the MIB object
eSwitchStormFrameTypeRegulated) received on the
port on which the storm is detected. Port isolation
consists of disabling an offending port in a manner
that will cause all frames received on that port to
be discarded, while allowing receive packet counters
to be maintained.
Parsed from file DEChub900-Switch.mib.txt
Company: None
Module: ESWITCH-MIB-V3-0
The action that the storm control process should take
when storm conditions are detected on a port. Frame
suppression consists of suspending the forwarding
of regulated frames (broadcast, multicast, or
both, depending on the value of the MIB object
eSwitchStormFrameTypeRegulated) received on the
port on which the storm is detected. Port isolation
consists of disabling an offending port in a manner
that will cause all frames received on that port to
be discarded, while allowing receive packet counters
to be maintained.
Parsed from file ESWITCH-MIB-V3-0.mib
Module: ESWITCH-MIB-V3-0
Vendor: DEC
Module: ESWITCH-MIB-V3-0
[Automatically extracted from oidview.com]
eSwitchStormControlAction OBJECT-TYPE SYNTAX INTEGER { frame-suppression(1), port-isolation(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The action that the storm control process should take when storm conditions are detected on a port. Frame suppression consists of suspending the forwarding of regulated frames (broadcast, multicast, or both, depending on the value of the MIB object eSwitchStormFrameTypeRegulated) received on the port on which the storm is detected. Port isolation consists of disabling an offending port in a manner that will cause all frames received on that port to be discarded, while allowing receive packet counters to be maintained. " ::= { eSwitchStorm 4 }
eSwitchStormControlAction OBJECT-TYPE SYNTAX INTEGER { frame-suppression(1), port-isolation(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The action that the storm control process should take when storm conditions are detected on a port. Frame suppression consists of suspending the forwarding of regulated frames (broadcast, multicast, or both, depending on the value of the MIB object eSwitchStormFrameTypeRegulated) received on the port on which the storm is detected. Port isolation consists of disabling an offending port in a manner that will cause all frames received on that port to be discarded, while allowing receive packet counters to be maintained. " ::= { eSwitchStorm 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.11.7.4.4.0 | eSwitchStormControlAction | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.11.7.4.1 | eSwitchStormFrameTypeRegulated | 1 | 1 | Specifies what types of frames with group destination addresses are currently being regulated. Only the specified class of traffi… |
| 1.3.6.1.4.1.36.2.18.11.7.4.2 | eSwitchStormPollingInterval | 1 | 1 | The length of the interval in 10 millisecond units between successive instants when the storm control process examines the broadc… |
| 1.3.6.1.4.1.36.2.18.11.7.4.3 | eSwitchStormRateLimit | 1 | 1 | The maximum number of regulated group address frames (broadcast, multicast, or a mixture of both - see eSwitchStormFrameTypeRegul… |
| 1.3.6.1.4.1.36.2.18.11.7.4.5 | eSwitchStormResumptionPolicy | 1 | 1 | The policy used by the storm control process to resume normal operation, once storm control action has been initiated. If continue… |
| 1.3.6.1.4.1.36.2.18.11.7.4.6 | eSwitchStormAutoInterval | 1 | 1 | This parameter is used when the eSwitchStormResumptionPolicy specified is auto -interval(2). Normal operation is automatically res… |
| 1.3.6.1.4.1.36.2.18.11.7.4.7 | eSwitchStormFramesLost | 1 | 1 | The number of regulated frames (broadcast, multicast or both, depending on the value of the object: eSwitchStormFrameTypeRegulate… |
| 1.3.6.1.4.1.36.2.18.11.7.4.8 | eSwitchStormActionsInitiated | 1 | 1 | The number of times that storm control action was initiated on any port on the switch. |
| 1.3.6.1.4.1.36.2.18.11.7.4.9 | eSwitchStormPortTable | 1 | 5 | A table that contains storm status information for every port on the switch. |