The policy used by the storm control process to
resume normal operation, once storm control action has
been initiated.
If continue-control(1) is specified, the storm
control action continues to be in effect, until the
user modifies one of the following storm control
parameters:
eSwitchStormFrameTypeRegulated,
eSwitchStormControlAction,
eSwitchStormResumptionPolicy.
If auto-interval(2) is specified, normal operation
is automatically resumed on the offending port after
a time interval specified by the MIB object
eSwitchStormAutoInterval.
If rate-limit(3) is specified, the storm control
action continues for the next p polling intervals,
where p is the number of polling intervals that the
control has to remain in effect in order to ensure
that the long term average of the regulated traffic
is less than the user specified rate limit. For
example, if the user-specified rate limit is 500
packets/polling interval, and 5000 multicast packets
were received during the last polling interval, the
storm control action continues to be in effect for
the next 9 polling intervals. This ensures that no
more than 5000 multicast packets are forwarded out of
the offending port in 10 polling intervals. Thus the
long term multicast traffic average is maintained
at 500 packets/polling interval.
The responsive-rate-limit(4) resumption policy is
identical to the rate-limit(3) policy, except for
the following difference. Once storm control action
has been initiated, if the switch determines that the
storm has subsided (for example, less than 500
packets were received during the last polling
interval), normal operation is immediately resumed,
instead of waiting for 'p' polling intervals to
complete.
Parsed from file DEChub900-Switch.mib.txt
Company: None
Module: ESWITCH-MIB-V3-0
The policy used by the storm control process to
resume normal operation, once storm control action has
been initiated.
If continue-control(1) is specified, the storm
control action continues to be in effect, until the
user modifies one of the following storm control
parameters:
eSwitchStormFrameTypeRegulated,
eSwitchStormControlAction,
eSwitchStormResumptionPolicy.
If auto-interval(2) is specified, normal operation
is automatically resumed on the offending port after
a time interval specified by the MIB object
eSwitchStormAutoInterval.
If rate-limit(3) is specified, the storm control
action continues for the next p polling intervals,
where p is the number of polling intervals that the
control has to remain in effect in order to ensure
that the long term average of the regulated traffic
is less than the user specified rate limit. For
example, if the user-specified rate limit is 500
packets/polling interval, and 5000 multicast packets
were received during the last polling interval, the
storm control action continues to be in effect for
the next 9 polling intervals. This ensures that no
more than 5000 multicast packets are forwarded out of
the offending port in 10 polling intervals. Thus the
long term multicast traffic average is maintained
at 500 packets/polling interval.
The responsive-rate-limit(4) resumption policy is
identical to the rate-limit(3) policy, except for
the following difference. Once storm control action
has been initiated, if the switch determines that the
storm has subsided (for example, less than 500
packets were received during the last polling
interval), normal operation is immediately resumed,
instead of waiting for 'p' polling intervals to
complete.
Parsed from file ESWITCH-MIB-V3-0.mib
Module: ESWITCH-MIB-V3-0
Vendor: DEC
Module: ESWITCH-MIB-V3-0
[Automatically extracted from oidview.com]
eSwitchStormResumptionPolicy OBJECT-TYPE SYNTAX INTEGER { continue-control(1), auto-interval(2), rate-limit(3), responsive-rate-limit(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The policy used by the storm control process to resume normal operation, once storm control action has been initiated. If continue-control(1) is specified, the storm control action continues to be in effect, until the user modifies one of the following storm control parameters: eSwitchStormFrameTypeRegulated, eSwitchStormControlAction, eSwitchStormResumptionPolicy. If auto-interval(2) is specified, normal operation is automatically resumed on the offending port after a time interval specified by the MIB object eSwitchStormAutoInterval. If rate-limit(3) is specified, the storm control action continues for the next p polling intervals, where p is the number of polling intervals that the control has to remain in effect in order to ensure that the long term average of the regulated traffic is less than the user specified rate limit. For example, if the user-specified rate limit is 500 packets/polling interval, and 5000 multicast packets were received during the last polling interval, the storm control action continues to be in effect for the next 9 polling intervals. This ensures that no more than 5000 multicast packets are forwarded out of the offending port in 10 polling intervals. Thus the long term multicast traffic average is maintained at 500 packets/polling interval. The responsive-rate-limit(4) resumption policy is identical to the rate-limit(3) policy, except for the following difference. Once storm control action has been initiated, if the switch determines that the storm has subsided (for example, less than 500 packets were received during the last polling interval), normal operation is immediately resumed, instead of waiting for 'p' polling intervals to complete." ::= { eSwitchStorm 5 }
eSwitchStormResumptionPolicy OBJECT-TYPE SYNTAX INTEGER { continue-control(1), auto-interval(2), rate-limit(3), responsive-rate-limit(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The policy used by the storm control process to resume normal operation, once storm control action has been initiated. If continue-control(1) is specified, the storm control action continues to be in effect, until the user modifies one of the following storm control parameters: eSwitchStormFrameTypeRegulated, eSwitchStormControlAction, eSwitchStormResumptionPolicy. If auto-interval(2) is specified, normal operation is automatically resumed on the offending port after a time interval specified by the MIB object eSwitchStormAutoInterval. If rate-limit(3) is specified, the storm control action continues for the next p polling intervals, where p is the number of polling intervals that the control has to remain in effect in order to ensure that the long term average of the regulated traffic is less than the user specified rate limit. For example, if the user-specified rate limit is 500 packets/polling interval, and 5000 multicast packets were received during the last polling interval, the storm control action continues to be in effect for the next 9 polling intervals. This ensures that no more than 5000 multicast packets are forwarded out of the offending port in 10 polling intervals. Thus the long term multicast traffic average is maintained at 500 packets/polling interval. The responsive-rate-limit(4) resumption policy is identical to the rate-limit(3) policy, except for the following difference. Once storm control action has been initiated, if the switch determines that the storm has subsided (for example, less than 500 packets were received during the last polling interval), normal operation is immediately resumed, instead of waiting for 'p' polling intervals to complete." ::= { eSwitchStorm 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.11.7.4.5.0 | eSwitchStormResumptionPolicy | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.11.7.4.1 | eSwitchStormFrameTypeRegulated | 1 | 1 | Specifies what types of frames with group destination addresses are currently being regulated. Only the specified class of traffi… |
| 1.3.6.1.4.1.36.2.18.11.7.4.2 | eSwitchStormPollingInterval | 1 | 1 | The length of the interval in 10 millisecond units between successive instants when the storm control process examines the broadc… |
| 1.3.6.1.4.1.36.2.18.11.7.4.3 | eSwitchStormRateLimit | 1 | 1 | The maximum number of regulated group address frames (broadcast, multicast, or a mixture of both - see eSwitchStormFrameTypeRegul… |
| 1.3.6.1.4.1.36.2.18.11.7.4.4 | eSwitchStormControlAction | 1 | 1 | The action that the storm control process should take when storm conditions are detected on a port. Frame suppression consists of… |
| 1.3.6.1.4.1.36.2.18.11.7.4.6 | eSwitchStormAutoInterval | 1 | 1 | This parameter is used when the eSwitchStormResumptionPolicy specified is auto -interval(2). Normal operation is automatically res… |
| 1.3.6.1.4.1.36.2.18.11.7.4.7 | eSwitchStormFramesLost | 1 | 1 | The number of regulated frames (broadcast, multicast or both, depending on the value of the object: eSwitchStormFrameTypeRegulate… |
| 1.3.6.1.4.1.36.2.18.11.7.4.8 | eSwitchStormActionsInitiated | 1 | 1 | The number of times that storm control action was initiated on any port on the switch. |
| 1.3.6.1.4.1.36.2.18.11.7.4.9 | eSwitchStormPortTable | 1 | 5 | A table that contains storm status information for every port on the switch. |