This attribute shall specify the mandatory maximum size, in
octets, of the MPDU that may be delivered to the PHY. An MSDU
shall be broken into fragments if its size exceeds the value
of this attribute after adding MAC headers and trailers. An MSDU
or MMPDU shall be fragmented when the resulting frame has an
individual address in the Address1 field, and the length of the
frame is larger than this threshold. The default value for this
attribute shall be the lesser of 2346 or the aMPDUMaxLength of
the attached PHY and shall never exceed the lesser of 2346 or
the aMPDUMaxLength of the attached PHY. The value of this
attribute shall never be less than 256.
Parsed from file RoamAbout-MIB.mib
Module: RoamAbout-MIB
Vendor: DEC
Module: RoamAbout-MIB
[Automatically extracted from oidview.com]
rabtDot11CurrentFragmentationThreshold OBJECT-TYPE SYNTAX INTEGER (256..2346) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute shall specify the mandatory maximum size, in octets, of the MPDU that may be delivered to the PHY. An MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers. An MSDU or MMPDU shall be fragmented when the resulting frame has an individual address in the Address1 field, and the length of the frame is larger than this threshold. The default value for this attribute shall be the lesser of 2346 or the aMPDUMaxLength of the attached PHY and shall never exceed the lesser of 2346 or the aMPDUMaxLength of the attached PHY. The value of this attribute shall never be less than 256. " ::= { rabtDot11Current 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.35.15.1.1 | rabtDot11CurrentChannel | 0 | 0 | The CURRENT channel. |
| 1.3.6.1.4.1.36.2.18.35.15.1.2 | rabtDot11CurrentNetworkName | 0 | 0 | The CURRENT network name. |
| 1.3.6.1.4.1.36.2.18.35.15.1.3 | rabtDot11CurrentStationName | 0 | 0 | Defines the CURRENT station name of the radio interface, used by client utilities. |
| 1.3.6.1.4.1.36.2.18.35.15.1.4 | rabtDot11CurrentOperationalRate | 0 | 0 | This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value represent… |
| 1.3.6.1.4.1.36.2.18.35.15.1.5 | rabtDot11CurrentSystemScale | 0 | 0 | Specifies the CURRENT Access Point density in the ESS. |
| 1.3.6.1.4.1.36.2.18.35.15.1.6 | rabtDot11CurrentDTIMPeriod | 0 | 0 | Defines the CURRENT number of beacon intervals between successive DTIMs. |
| 1.3.6.1.4.1.36.2.18.35.15.1.8 | rabtDot11CurrentRTSThreshold | 0 | 0 | This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed. An RTS/CT… |
| 1.3.6.1.4.1.36.2.18.35.15.1.9 | rabtDot11CurrentMulticastPMBuffering | 0 | 0 | Defines if multicast MAC frames are CURRENTLY buffered for transmission after DTIM. If disabled, MAC frames are immediately plac… |
| 1.3.6.1.4.1.36.2.18.35.15.1.10 | rabtDot11CurrentSecureAccess | 0 | 0 | When this mode is set to enabled, the AP will only associate with stations that have the same network name as the AP. When this m… |
| 1.3.6.1.4.1.36.2.18.35.15.1.11 | rabtDot11CurrentTransmitRate | 0 | 0 | This value specifies the transmission rate of the AP. It is implemented when cards that operate faster than the 2Mbit 802.11 stan… |
| 1.3.6.1.4.1.36.2.18.35.15.1.12 | rabtDot11CurrentPrivacyInvoked | 0 | 0 | When this attribute is true, it shall indicate that the AP is currently using the 802.11 WEP mechanism for transmitting frames of… |
| 1.3.6.1.4.1.36.2.18.35.15.1.13 | rabtDot11CurrentExcludeUnencrypted | 0 | 0 | This value indicates the current setting of the dot11ExcludeUnencrypted attribute in the AP. |