This attribute shall indicate the number of octets in an MPDU,
below which an RTS/CTS handshake shall not be performed. An
RTS/CTS handshake shall be performed at the beginning of any
frame exchange sequence where the MPDU is of type Data or
Management, the MPDU has an individual address in the Address1
field, and the length of the MPDU is greater than
this threshold. (For additional details, refer to Table 21 in
9.7.) Setting this attribute to be larger than the maximum
MSDU size shall have the effect of turning off the RTS/CTS
handshake for frames of Data or Management type transmitted by
this STA. Setting this attribute to zero shall have the effect
of turning on the RTS/CTS handshake for all frames of Data or
Management type transmitted by this STA. The default value of
this attribute shall be 2347.
Parsed from file RoamAbout-MIB.mib
Module: RoamAbout-MIB
Vendor: DEC
Module: RoamAbout-MIB
[Automatically extracted from oidview.com]
rabtDot11CurrentRTSThreshold OBJECT-TYPE SYNTAX INTEGER (0..2347) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed. An RTS/CTS handshake shall be performed at the beginning of any frame exchange sequence where the MPDU is of type Data or Management, the MPDU has an individual address in the Address1 field, and the length of the MPDU is greater than this threshold. (For additional details, refer to Table 21 in 9.7.) Setting this attribute to be larger than the maximum MSDU size shall have the effect of turning off the RTS/CTS handshake for frames of Data or Management type transmitted by this STA. Setting this attribute to zero shall have the effect of turning on the RTS/CTS handshake for all frames of Data or Management type transmitted by this STA. The default value of this attribute shall be 2347." ::= { rabtDot11Current 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.35.15.1.1 | rabtDot11CurrentChannel | 0 | 0 | The CURRENT channel. |
| 1.3.6.1.4.1.36.2.18.35.15.1.2 | rabtDot11CurrentNetworkName | 0 | 0 | The CURRENT network name. |
| 1.3.6.1.4.1.36.2.18.35.15.1.3 | rabtDot11CurrentStationName | 0 | 0 | Defines the CURRENT station name of the radio interface, used by client utilities. |
| 1.3.6.1.4.1.36.2.18.35.15.1.4 | rabtDot11CurrentOperationalRate | 0 | 0 | This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value represent… |
| 1.3.6.1.4.1.36.2.18.35.15.1.5 | rabtDot11CurrentSystemScale | 0 | 0 | Specifies the CURRENT Access Point density in the ESS. |
| 1.3.6.1.4.1.36.2.18.35.15.1.6 | rabtDot11CurrentDTIMPeriod | 0 | 0 | Defines the CURRENT number of beacon intervals between successive DTIMs. |
| 1.3.6.1.4.1.36.2.18.35.15.1.7 | rabtDot11CurrentFragmentationThreshold | 0 | 0 | This attribute shall specify the mandatory maximum size, in octets, of the MPDU that may be delivered to the PHY. An MSDU shall b… |
| 1.3.6.1.4.1.36.2.18.35.15.1.9 | rabtDot11CurrentMulticastPMBuffering | 0 | 0 | Defines if multicast MAC frames are CURRENTLY buffered for transmission after DTIM. If disabled, MAC frames are immediately plac… |
| 1.3.6.1.4.1.36.2.18.35.15.1.10 | rabtDot11CurrentSecureAccess | 0 | 0 | When this mode is set to enabled, the AP will only associate with stations that have the same network name as the AP. When this m… |
| 1.3.6.1.4.1.36.2.18.35.15.1.11 | rabtDot11CurrentTransmitRate | 0 | 0 | This value specifies the transmission rate of the AP. It is implemented when cards that operate faster than the 2Mbit 802.11 stan… |
| 1.3.6.1.4.1.36.2.18.35.15.1.12 | rabtDot11CurrentPrivacyInvoked | 0 | 0 | When this attribute is true, it shall indicate that the AP is currently using the 802.11 WEP mechanism for transmitting frames of… |
| 1.3.6.1.4.1.36.2.18.35.15.1.13 | rabtDot11CurrentExcludeUnencrypted | 0 | 0 | This value indicates the current setting of the dot11ExcludeUnencrypted attribute in the AP. |