The maximum number of times to resend mail. If set to 0 only send once. The maximum value is 25
Parsed from file sa.mib.txt
Company: None
Module: HHMSAGENT-MIB
The maximum number of times to resend mail. If set to 0 only send once. The maximum value is 25
Parsed from file HHMSAGENT-MIB.mib
Module: HHMSAGENT-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
hhmsSensorArrayMailMaxResend OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of times to resend mail. If set to 0 only send once. The maximum value is 25" ::= { hhmsSensorArrayEntry 37 }
hhmsSensorArrayMailMaxResend OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of times to resend mail. If set to 0 only send once. The maximum value is 25" ::= { hhmsSensorArrayEntry 37 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3854.1.2.2.1.37.0 | hhmsSensorArrayMailMaxResend | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3854.1.2.2.1.1 | hhmsSensorArrayHost | 1 | 1 | The Host of this sensor, this is the IP address |
| 1.3.6.1.4.1.3854.1.2.2.1.2 | hhmsSensorArrayUseDHCP | 1 | 1 | To use DHCP enter a 1, to use a static IP address enter a 2 |
| 1.3.6.1.4.1.3854.1.2.2.1.3 | hhmsSensorArrayMAC | 1 | 1 | The MAC address of this sensor. |
| 1.3.6.1.4.1.3854.1.2.2.1.4 | hhmsSensorArraySetCommunity | 1 | 1 | The sensorArray community string used for snmp Sets |
| 1.3.6.1.4.1.3854.1.2.2.1.5 | hhmsSensorArrayGetCommunity | 1 | 1 | The sensorArray community string used for snmp Gets |
| 1.3.6.1.4.1.3854.1.2.2.1.6 | hhmsSensorArrayDescription | 1 | 1 | A Description of this sensorArray |
| 1.3.6.1.4.1.3854.1.2.2.1.7 | hhmsSensorArrayLocation | 1 | 1 | The description of the physical location of this sensorArray |
| 1.3.6.1.4.1.3854.1.2.2.1.8 | hhmsSensorArrayLastUpdate | 1 | 1 | The last time the sensorArray was read |
| 1.3.6.1.4.1.3854.1.2.2.1.9 | hhmsSensorArrayStatus | 1 | 1 | The current status of this sensorArray |
| 1.3.6.1.4.1.3854.1.2.2.1.10 | hhmsSensorArrayOnline | 1 | 1 | If this sensorArray is currently online |
| 1.3.6.1.4.1.3854.1.2.2.1.11 | hhmsSensorArrayGoOnline | 1 | 1 | To put online enter a 1, to take offline enter a 2 |
| 1.3.6.1.4.1.3854.1.2.2.1.12 | hhmsSensorArrayReadInterval | 1 | 1 | How many seconds between readings of this sensor |
| 1.3.6.1.4.1.3854.1.2.2.1.13 | hhmsSensorArrayReceiveTimeout | 1 | 1 | How many seconds to wait to receive data from the sensor |
| 1.3.6.1.4.1.3854.1.2.2.1.14 | hhmsSensorArrayReceiveRetries | 1 | 1 | How many times to retry to receive data before giving up. A -1 means never give up trying |
| 1.3.6.1.4.1.3854.1.2.2.1.15 | hhmsSensorArrayVersion | 1 | 1 | The version of this SensorArray |
| 1.3.6.1.4.1.3854.1.2.2.1.16 | hhmsSensorArrayTempTable, hhmsSensorArrayTemp | 1 | 69 | This table contains the data for every Temperature Sensor in the SensorArray. Each row in the table contains data for a differe… |
| 1.3.6.1.4.1.3854.1.2.2.1.17 | hhmsSensorArrayHumidityTable, hhmsSensorArrayHumidity | 1 | 57 | This table contains the data for every Humidity Sensor in the SensorArray. Each row in the table contains data for a different … |
| 1.3.6.1.4.1.3854.1.2.2.1.18 | hhmsSensorArraySwitchTable, hhmsSensorArraySwitch | 1 | 52 | hhmsSensorArraySwitchtable |
| 1.3.6.1.4.1.3854.1.2.2.1.19 | hhmsSensorArraySerialTable | 13 | 931 | This table contains the data for every Serial Port in the SensorArray. Each row in the table contains data for a different Seri… |
| 1.3.6.1.4.1.3854.1.2.2.1.20 | hhmsSensorArrayDebug | 1 | 1 | Turn on or off debug messages |
| 1.3.6.1.4.1.3854.1.2.2.1.21 | hhmsSensorArrayDebugIP | 1 | 1 | The IP address to send debug messages to |
| 1.3.6.1.4.1.3854.1.2.2.1.22 | hhmsSensorArrayTrapResend | 1 | 1 | If traps for Warning or Error should be resent. Traps for Normal status are sent once |
| 1.3.6.1.4.1.3854.1.2.2.1.23 | hhmsSensorArrayTrapResendInterval | 1 | 1 | How often to resend mail or Traps. Enter the number of seconds from 15 to 65535. Mail for WARNING and ERROR are resent at this … |
| 1.3.6.1.4.1.3854.1.2.2.1.24 | hhmsSensorArraySendTraps | 1 | 1 | Turn on or off the sending of traps |
| 1.3.6.1.4.1.3854.1.2.2.1.25 | hhmsSensorArrayTrapDestination | 1 | 1 | The IP address of the trap destination |
| 1.3.6.1.4.1.3854.1.2.2.1.26 | hhmsSensorArrayTrapCommunity | 1 | 1 | The community string of the trap destination |
| 1.3.6.1.4.1.3854.1.2.2.1.27 | hhmsSensorArrayTrapDefaultGateway | 1 | 1 | If the trap destination is on another network, enter the IP address of the router |
| 1.3.6.1.4.1.3854.1.2.2.1.28 | hhmsSensorArrayTrapUseDefaultGateway | 1 | 1 | If the trap destination uses the default gateway |
| 1.3.6.1.4.1.3854.1.2.2.1.29 | hhmsSensorArrayTrapDestinationMac | 1 | 1 | If the trap destination MAC address |
| 1.3.6.1.4.1.3854.1.2.2.1.30 | hhmsSensorArraySendMail | 1 | 1 | Turn on or off the sending of Mail |
| 1.3.6.1.4.1.3854.1.2.2.1.31 | hhmsSensorArrayMailRecpt | 1 | 1 | The email address of the Recipient |
| 1.3.6.1.4.1.3854.1.2.2.1.32 | hhmsSensorArrayMailFrom | 1 | 1 | The email address of the Sender |
| 1.3.6.1.4.1.3854.1.2.2.1.33 | hhmsSensorArrayMailSmpt | 1 | 1 | The IP Address of the SMPT server. Note: This must be in dotted decimal form |
| 1.3.6.1.4.1.3854.1.2.2.1.34 | hhmsSensorArrayMailGateway | 1 | 1 | If the smpt server is on another network, enter the IP address of the router |
| 1.3.6.1.4.1.3854.1.2.2.1.35 | hhmsSensorArrayMailUseGateway | 1 | 1 | If the mail uses the default gateway |
| 1.3.6.1.4.1.3854.1.2.2.1.36 | hhmsSensorArrayMailResendInterval | 1 | 1 | How often to resend mail or Traps. Enter the number of seconds from 10 to 65535. Mail for WARNING and ERROR are resent at this … |
| 1.3.6.1.4.1.3854.1.2.2.1.38 | hhmsSensorArrayMailDestinationMac | 1 | 1 | If the mail destination MAC address, either the smpt server or the gateway |
| 1.3.6.1.4.1.3854.1.2.2.1.39 | hhmsSensorArrayMailLastStatus | 1 | 1 | The status of the most recent attempt to send an email |
| 1.3.6.1.4.1.3854.1.2.2.1.40 | hhmsSensorArrayPowerControlTable | 1 | 9 | This table contains the Power Control features in the sensorArray. |
| 1.3.6.1.4.1.3854.1.2.2.1.41 | hhmsSensorArrayPowerMonitorTable | 1 | 14 | This table contains the Power Monitor features in the sensorArray. |
| 1.3.6.1.4.1.3854.1.2.2.1.42 | hhmsSensorArrayHighDriveTable | 1 | 17 | This table contains the High Current Drivers in the sensorArray. |
| 1.3.6.1.4.1.3854.1.2.2.1.43 | hhmsSensorArrayCameraTable | 1 | 8 | This table contains the Camera features in the sensorArray. |
| 1.3.6.1.4.1.3854.1.2.2.1.50 | hhmsSensorArrayTrapMailPollInterval | 1 | 1 | How often the sensor thresholds are tested before sending traps or mail. This can vary from 3 to 15 seconds |
| 1.3.6.1.4.1.3854.1.2.2.1.51 | hhmsSensorArraySendTestMail | 1 | 1 | Send out an email test message |
| 1.3.6.1.4.1.3854.1.2.2.1.52 | hhmsSensorArrayLastSystemError | 1 | 1 | A text string containing the description of the last system error |
| 1.3.6.1.4.1.3854.1.2.2.1.53 | hhmsSensorArrayDataCollectionPeriod | 1 | 1 | The number of minutes between collections of the data logger. This can vary from 1 to 60 minutes |
| 1.3.6.1.4.1.3854.1.2.2.1.54 | hhmsSensorArrayMailTimeout | 1 | 1 | The number of seconds to wait for a timeout while sending email This can vary from 10 to 60 seconds |
| 1.3.6.1.4.1.3854.1.2.2.1.55 | sensorProbeAutoSense | 0 | 0 | sensorProbeAutoSense OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Enabl… |
| 1.3.6.1.4.1.3854.1.2.2.1.56 | sensorProbeChecksum | 0 | 0 | sensorProbeChecksum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SP Only: The Flash Checksum, comp… |
| 1.3.6.1.4.1.3854.1.2.2.1.57 | sensorProbeUsePassword | 0 | 0 | sensorProbeUsePassword OBJECT-TYPE SYNTAX INTEGER { usePassword(0), doNotUsePassword(1) } ACCESS read-write STATUS mandatory DE… |
| 1.3.6.1.4.1.3854.1.2.2.1.59 | sensorProbeDisplayLogo | 0 | 0 | sensorProbeDisplayLogo OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Ena… |
| 1.3.6.1.4.1.3854.1.2.2.1.60 | sensorProbeTrapType | 0 | 0 | sensorProbeTrapType OBJECT-TYPE SYNTAX INTEGER { specificTypeTrap(1), generalTypeTrap(2), bothtypeTraps(3), statusTypeTraps(4) … |
| 1.3.6.1.4.1.3854.1.2.2.1.61 | sensorProbeMailCC | 0 | 0 | sensorProbeMailCC OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The email address of the CC" |
| 1.3.6.1.4.1.3854.1.2.2.1.62 | sensorProbeAllowIPChange | 0 | 0 | sensorProbeAllowIPChange OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "T… |
| 1.3.6.1.4.1.3854.1.2.2.1.65 | sensorProbeTimeOfDay | 0 | 0 | sensorProbeTimeOfDay OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The time of day in the fo… |
| 1.3.6.1.4.1.3854.1.2.2.1.66 | sensorProbeEnableSysLog | 0 | 0 | sensorProbeEnableSysLog OBJECT-TYPE SYNTAX INTEGER { enableLogToFlash(1), enableLogToNetAndFlash(2), disable(3) } ACCESS read-w… |
| 1.3.6.1.4.1.3854.1.2.2.1.67 | sensorProbeReadSysLog | 0 | 0 | sensorProbeReadSysLog OBJECT-TYPE SYNTAX INTEGER { lastMessage(1), allMessages(2) } ACCESS read-write STATUS mandatory DESCRIPT… |
| 1.3.6.1.4.1.3854.1.2.2.1.68 | sensorProbeClearSysLog | 0 | 0 | sensorProbeClearSysLog OBJECT-TYPE SYNTAX INTEGER { allMessages(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Delete all… |
| 1.3.6.1.4.1.3854.1.2.2.1.69 | sensorProbeSyslogDestIP | 0 | 0 | sensorProbeSyslogDestIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP Address of the Sysl… |
| 1.3.6.1.4.1.3854.1.2.2.1.70 | sensorProbeSyslogPort | 0 | 0 | sensorProbeSyslogPort OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "The Port Number of the Syslog se… |
| 1.3.6.1.4.1.3854.1.2.2.1.71 | sensorProbeSetSyslogMsgPrefix | 0 | 0 | sensorProbeSetSyslogMsgPrefix OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "SP Only: The Pre… |
| 1.3.6.1.4.1.3854.1.2.2.1.81 | sensorProbeTimeZone | 0 | 0 | sensorProbeTimeZone OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "System time zone" |
| 1.3.6.1.4.1.3854.1.2.2.1.83 | sensorProbeMegaVersion | 0 | 0 | sensorProbeMegaVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Version number of mega board" |
| 1.3.6.1.4.1.3854.1.2.2.1.84 | sensorProbeNtpMode | 0 | 0 | sensorProbeNtpMode OBJECT-TYPE SYNTAX INTEGER { notUse(0), oneTime(1), onSystemStartUp(2), onceAMounth(3), onceAWeek(4), onceAD… |
| 1.3.6.1.4.1.3854.1.2.2.1.85 | sensorProbeNtpServer | 0 | 0 | sensorProbeNtpServer OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "NTP server which this mac… |
| 1.3.6.1.4.1.3854.1.2.2.1.87 | sensorProbeSMTPAuth | 0 | 0 | sensorProbeSMTPAuth OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This e… |
| 1.3.6.1.4.1.3854.1.2.2.1.88 | sensorProbeSMTPLogin | 0 | 0 | sensorProbeSMTPLogin OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The username used to logi… |
| 1.3.6.1.4.1.3854.1.2.2.1.89 | sensorProbeSMTPPassword | 0 | 0 | sensorProbeSMTPPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The password used to l… |
| 1.3.6.1.4.1.3854.1.2.2.1.90 | sensorProbeDNSServer | 0 | 0 | sensorProbeDNSServer OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP address of the DNS server" |
| 1.3.6.1.4.1.3854.1.2.2.1.91 | sensorProbeAltWebPort | 0 | 0 | sensorProbeAltWebPort OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "The alternative for a port numbe… |
| 1.3.6.1.4.1.3854.1.2.2.1.92 | sensorProbeNumberOfSensorPort | 0 | 0 | sensorProbeNumberOfSensorPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of sensor po… |
| 1.3.6.1.4.1.3854.1.2.2.1.93 | sensorProbeSendTrapsAlive | 0 | 0 | sensorProbeSendTrapsAlive OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "On or of… |
| 1.3.6.1.4.1.3854.1.2.2.1.94 | sensorProbeTrapReIntervalAlive | 0 | 0 | sensorProbeTrapReIntervalAlive OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Time between each kee… |
| 1.3.6.1.4.1.3854.1.2.2.1.95 | sensorProbeUseCamera | 0 | 0 | sensorProbeUseCamera OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "On or off cam… |
| 1.3.6.1.4.1.3854.1.2.2.1.96 | sensorProbeAdcCalibratePort | 0 | 0 | sensorProbeAdcCalibratePort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Calibrate value for anal… |
| 1.3.6.1.4.1.3854.1.2.2.1.98 | sensorProbeMailSubject | 0 | 0 | sensorProbeMailSubject OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Email Subject." |
| 1.3.6.1.4.1.3854.1.2.2.1.99 | sensorProbeSnmpPort | 0 | 0 | sensorProbeSnmpPort OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "SP Only: Port number used to acces… |
| 1.3.6.1.4.1.3854.1.2.2.1.100 | sensorProbeSnmpTrapPort | 0 | 0 | sensorProbeSnmpTrapPort OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "SP Only: Port number used to a… |
| 1.3.6.1.4.1.3854.1.2.2.1.101 | sensorProbeSnmpIndexingMode | 0 | 0 | sensorProbeSnmpIndexingMode OBJECT-TYPE SYNTAX INTEGER { index0(0), index1(1) } ACCESS read-write STATUS mandatory DESCRIPTION … |
| 1.3.6.1.4.1.3854.1.2.2.1.103 | sensorProbeNotifyBoot | 0 | 0 | sensorProbeNotifyBoot OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "SP2 Only: Enable Notify on boo… |
| 1.3.6.1.4.1.3854.1.2.2.1.104 | sensorProbeDelayNotifyBoot | 0 | 0 | sensorProbeDelayNotifyBoot OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "SP2 Only: Delay time for … |
| 1.3.6.1.4.1.3854.1.2.2.1.105 | sensorProbeSmtpPort | 0 | 0 | sensorProbeSmtpPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "SMTP Port number used to send em… |
| 1.3.6.1.4.1.3854.1.2.2.1.106 | sensorProbeReboot | 0 | 0 | sensorProbeReboot OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Reboot SP2/SP8 set to 1" |
| 1.3.6.1.4.1.3854.1.2.2.1.107 | sensorProbeServerEnable | 0 | 0 | sensorProbeServerEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "En… |
| 1.3.6.1.4.1.3854.1.2.2.1.108 | sensorProbeFirmwareVersion | 0 | 0 | sensorProbeFirmwareVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Current firmware ver… |
| 1.3.6.1.4.1.3854.1.2.2.1.109 | sensorProbeProductType | 0 | 0 | sensorProbeProductType OBJECT-TYPE SYNTAX INTEGER { sensorProbe2(1), sensorProbe8(2), sensorProbeLinuxWithoutUSB(3), sensorProb… |
| 1.3.6.1.4.1.3854.1.2.2.1.110 | sensorProbeRequestResendTrap | 0 | 0 | sensorProbeRequestResendTrap OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "SP only: Send immediate… |
| 1.3.6.1.4.1.3854.1.2.2.1.112 | sensorProbeSeparateEmail | 0 | 0 | sensorProbeSeparateEmail OBJECT-TYPE SYNTAX INTEGER { notSeparate(0), separate(1) } ACCESS read-write STATUS mandatory DESCRIPT… |
| 1.3.6.1.4.1.3854.1.2.2.1.113 | sensorProbeMailCustom | 0 | 0 | sensorProbeMailCustom OBJECT-TYPE SYNTAX INTEGER { normal(0), custom(1) } ACCESS read-write STATUS mandatory DESCRIPTION "SP on… |
| 1.3.6.1.4.1.3854.1.2.2.1.114 | sensorProbeUntidePassword | 0 | 0 | sensorProbeUntidePassword OBJECT-TYPE SYNTAX INTEGER { tidePassword(0), untidePassword(1) } ACCESS read-write STATUS mandatory … |
| 1.3.6.1.4.1.3854.1.2.2.1.115 | sensorProbeWebPassword | 2 | 2 | None |
| 1.3.6.1.4.1.3854.1.2.2.1.116 | sensorProbeReloadNetwork | 0 | 0 | sensorProbeReloadNetwork OBJECT-TYPE SYNTAX INTEGER { reload(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set 1 for rel… |
| 1.3.6.1.4.1.3854.1.2.2.1.117 | sensorProbeStatusNumber | 3 | 3 | None |
| 1.3.6.1.4.1.3854.1.2.2.1.118 | sensorProbeTypeName | 34 | 34 | None |
| 1.3.6.1.4.1.3854.1.2.2.1.119 | sensorProbeProductRevision | 0 | 0 | sensorProbeProductRevision OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SP only: Revision number" |