sensorProbeEnableSysLog OBJECT-TYPE
SYNTAX INTEGER {
enableLogToFlash(1),
enableLogToNetAndFlash(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This enables sysLog Messages,including logging to the Net. The Destination IP of the net messages is the same as the source IP of the sender of this command"
View at oid-info.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3854.1.2.2.1.1 | hhmsSensorArrayHost | 1 | 1 | The Host of this sensor, this is the IP address |
| 1.3.6.1.4.1.3854.1.2.2.1.2 | hhmsSensorArrayUseDHCP | 1 | 1 | To use DHCP enter a 1, to use a static IP address enter a 2 |
| 1.3.6.1.4.1.3854.1.2.2.1.3 | hhmsSensorArrayMAC | 1 | 1 | The MAC address of this sensor. |
| 1.3.6.1.4.1.3854.1.2.2.1.4 | hhmsSensorArraySetCommunity | 1 | 1 | The sensorArray community string used for snmp Sets |
| 1.3.6.1.4.1.3854.1.2.2.1.5 | hhmsSensorArrayGetCommunity | 1 | 1 | The sensorArray community string used for snmp Gets |
| 1.3.6.1.4.1.3854.1.2.2.1.6 | hhmsSensorArrayDescription | 1 | 1 | A Description of this sensorArray |
| 1.3.6.1.4.1.3854.1.2.2.1.7 | hhmsSensorArrayLocation | 1 | 1 | The description of the physical location of this sensorArray |
| 1.3.6.1.4.1.3854.1.2.2.1.8 | hhmsSensorArrayLastUpdate | 1 | 1 | The last time the sensorArray was read |
| 1.3.6.1.4.1.3854.1.2.2.1.9 | hhmsSensorArrayStatus | 1 | 1 | The current status of this sensorArray |
| 1.3.6.1.4.1.3854.1.2.2.1.10 | hhmsSensorArrayOnline | 1 | 1 | If this sensorArray is currently online |
| 1.3.6.1.4.1.3854.1.2.2.1.11 | hhmsSensorArrayGoOnline | 1 | 1 | To put online enter a 1, to take offline enter a 2 |
| 1.3.6.1.4.1.3854.1.2.2.1.12 | hhmsSensorArrayReadInterval | 1 | 1 | How many seconds between readings of this sensor |
| 1.3.6.1.4.1.3854.1.2.2.1.13 | hhmsSensorArrayReceiveTimeout | 1 | 1 | How many seconds to wait to receive data from the sensor |
| 1.3.6.1.4.1.3854.1.2.2.1.14 | hhmsSensorArrayReceiveRetries | 1 | 1 | How many times to retry to receive data before giving up. A -1 means never give up trying |
| 1.3.6.1.4.1.3854.1.2.2.1.15 | hhmsSensorArrayVersion | 1 | 1 | The version of this SensorArray |
| 1.3.6.1.4.1.3854.1.2.2.1.16 | hhmsSensorArrayTempTable, hhmsSensorArrayTemp | 1 | 69 | This table contains the data for every Temperature Sensor in the SensorArray. Each row in the table contains data for a differe… |
| 1.3.6.1.4.1.3854.1.2.2.1.17 | hhmsSensorArrayHumidityTable, hhmsSensorArrayHumidity | 1 | 57 | This table contains the data for every Humidity Sensor in the SensorArray. Each row in the table contains data for a different … |
| 1.3.6.1.4.1.3854.1.2.2.1.18 | hhmsSensorArraySwitchTable, hhmsSensorArraySwitch | 1 | 52 | hhmsSensorArraySwitchtable |
| 1.3.6.1.4.1.3854.1.2.2.1.19 | hhmsSensorArraySerialTable | 13 | 931 | This table contains the data for every Serial Port in the SensorArray. Each row in the table contains data for a different Seri… |
| 1.3.6.1.4.1.3854.1.2.2.1.20 | hhmsSensorArrayDebug | 1 | 1 | Turn on or off debug messages |
| 1.3.6.1.4.1.3854.1.2.2.1.21 | hhmsSensorArrayDebugIP | 1 | 1 | The IP address to send debug messages to |
| 1.3.6.1.4.1.3854.1.2.2.1.22 | hhmsSensorArrayTrapResend | 1 | 1 | If traps for Warning or Error should be resent. Traps for Normal status are sent once |
| 1.3.6.1.4.1.3854.1.2.2.1.23 | hhmsSensorArrayTrapResendInterval | 1 | 1 | How often to resend mail or Traps. Enter the number of seconds from 15 to 65535. Mail for WARNING and ERROR are resent at this … |
| 1.3.6.1.4.1.3854.1.2.2.1.24 | hhmsSensorArraySendTraps | 1 | 1 | Turn on or off the sending of traps |
| 1.3.6.1.4.1.3854.1.2.2.1.25 | hhmsSensorArrayTrapDestination | 1 | 1 | The IP address of the trap destination |
| 1.3.6.1.4.1.3854.1.2.2.1.26 | hhmsSensorArrayTrapCommunity | 1 | 1 | The community string of the trap destination |
| 1.3.6.1.4.1.3854.1.2.2.1.27 | hhmsSensorArrayTrapDefaultGateway | 1 | 1 | If the trap destination is on another network, enter the IP address of the router |
| 1.3.6.1.4.1.3854.1.2.2.1.28 | hhmsSensorArrayTrapUseDefaultGateway | 1 | 1 | If the trap destination uses the default gateway |
| 1.3.6.1.4.1.3854.1.2.2.1.29 | hhmsSensorArrayTrapDestinationMac | 1 | 1 | If the trap destination MAC address |
| 1.3.6.1.4.1.3854.1.2.2.1.30 | hhmsSensorArraySendMail | 1 | 1 | Turn on or off the sending of Mail |
| 1.3.6.1.4.1.3854.1.2.2.1.31 | hhmsSensorArrayMailRecpt | 1 | 1 | The email address of the Recipient |
| 1.3.6.1.4.1.3854.1.2.2.1.32 | hhmsSensorArrayMailFrom | 1 | 1 | The email address of the Sender |
| 1.3.6.1.4.1.3854.1.2.2.1.33 | hhmsSensorArrayMailSmpt | 1 | 1 | The IP Address of the SMPT server. Note: This must be in dotted decimal form |
| 1.3.6.1.4.1.3854.1.2.2.1.34 | hhmsSensorArrayMailGateway | 1 | 1 | If the smpt server is on another network, enter the IP address of the router |
| 1.3.6.1.4.1.3854.1.2.2.1.35 | hhmsSensorArrayMailUseGateway | 1 | 1 | If the mail uses the default gateway |
| 1.3.6.1.4.1.3854.1.2.2.1.36 | hhmsSensorArrayMailResendInterval | 1 | 1 | How often to resend mail or Traps. Enter the number of seconds from 10 to 65535. Mail for WARNING and ERROR are resent at this … |
| 1.3.6.1.4.1.3854.1.2.2.1.37 | hhmsSensorArrayMailMaxResend | 1 | 1 | The maximum number of times to resend mail. If set to 0 only send once. The maximum value is 25 |
| 1.3.6.1.4.1.3854.1.2.2.1.38 | hhmsSensorArrayMailDestinationMac | 1 | 1 | If the mail destination MAC address, either the smpt server or the gateway |
| 1.3.6.1.4.1.3854.1.2.2.1.39 | hhmsSensorArrayMailLastStatus | 1 | 1 | The status of the most recent attempt to send an email |
| 1.3.6.1.4.1.3854.1.2.2.1.40 | hhmsSensorArrayPowerControlTable | 1 | 9 | This table contains the Power Control features in the sensorArray. |
| 1.3.6.1.4.1.3854.1.2.2.1.41 | hhmsSensorArrayPowerMonitorTable | 1 | 14 | This table contains the Power Monitor features in the sensorArray. |
| 1.3.6.1.4.1.3854.1.2.2.1.42 | hhmsSensorArrayHighDriveTable | 1 | 17 | This table contains the High Current Drivers in the sensorArray. |
| 1.3.6.1.4.1.3854.1.2.2.1.43 | hhmsSensorArrayCameraTable | 1 | 8 | This table contains the Camera features in the sensorArray. |
| 1.3.6.1.4.1.3854.1.2.2.1.50 | hhmsSensorArrayTrapMailPollInterval | 1 | 1 | How often the sensor thresholds are tested before sending traps or mail. This can vary from 3 to 15 seconds |
| 1.3.6.1.4.1.3854.1.2.2.1.51 | hhmsSensorArraySendTestMail | 1 | 1 | Send out an email test message |
| 1.3.6.1.4.1.3854.1.2.2.1.52 | hhmsSensorArrayLastSystemError | 1 | 1 | A text string containing the description of the last system error |
| 1.3.6.1.4.1.3854.1.2.2.1.53 | hhmsSensorArrayDataCollectionPeriod | 1 | 1 | The number of minutes between collections of the data logger. This can vary from 1 to 60 minutes |
| 1.3.6.1.4.1.3854.1.2.2.1.54 | hhmsSensorArrayMailTimeout | 1 | 1 | The number of seconds to wait for a timeout while sending email This can vary from 10 to 60 seconds |
| 1.3.6.1.4.1.3854.1.2.2.1.55 | sensorProbeAutoSense | 0 | 0 | sensorProbeAutoSense OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Enabl… |
| 1.3.6.1.4.1.3854.1.2.2.1.56 | sensorProbeChecksum | 0 | 0 | sensorProbeChecksum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SP Only: The Flash Checksum, comp… |
| 1.3.6.1.4.1.3854.1.2.2.1.57 | sensorProbeUsePassword | 0 | 0 | sensorProbeUsePassword OBJECT-TYPE SYNTAX INTEGER { usePassword(0), doNotUsePassword(1) } ACCESS read-write STATUS mandatory DE… |
| 1.3.6.1.4.1.3854.1.2.2.1.59 | sensorProbeDisplayLogo | 0 | 0 | sensorProbeDisplayLogo OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Ena… |
| 1.3.6.1.4.1.3854.1.2.2.1.60 | sensorProbeTrapType | 0 | 0 | sensorProbeTrapType OBJECT-TYPE SYNTAX INTEGER { specificTypeTrap(1), generalTypeTrap(2), bothtypeTraps(3), statusTypeTraps(4) … |
| 1.3.6.1.4.1.3854.1.2.2.1.61 | sensorProbeMailCC | 0 | 0 | sensorProbeMailCC OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The email address of the CC" |
| 1.3.6.1.4.1.3854.1.2.2.1.62 | sensorProbeAllowIPChange | 0 | 0 | sensorProbeAllowIPChange OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "T… |
| 1.3.6.1.4.1.3854.1.2.2.1.65 | sensorProbeTimeOfDay | 0 | 0 | sensorProbeTimeOfDay OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The time of day in the fo… |
| 1.3.6.1.4.1.3854.1.2.2.1.67 | sensorProbeReadSysLog | 0 | 0 | sensorProbeReadSysLog OBJECT-TYPE SYNTAX INTEGER { lastMessage(1), allMessages(2) } ACCESS read-write STATUS mandatory DESCRIPT… |
| 1.3.6.1.4.1.3854.1.2.2.1.68 | sensorProbeClearSysLog | 0 | 0 | sensorProbeClearSysLog OBJECT-TYPE SYNTAX INTEGER { allMessages(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Delete all… |
| 1.3.6.1.4.1.3854.1.2.2.1.69 | sensorProbeSyslogDestIP | 0 | 0 | sensorProbeSyslogDestIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP Address of the Sysl… |
| 1.3.6.1.4.1.3854.1.2.2.1.70 | sensorProbeSyslogPort | 0 | 0 | sensorProbeSyslogPort OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "The Port Number of the Syslog se… |
| 1.3.6.1.4.1.3854.1.2.2.1.71 | sensorProbeSetSyslogMsgPrefix | 0 | 0 | sensorProbeSetSyslogMsgPrefix OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "SP Only: The Pre… |
| 1.3.6.1.4.1.3854.1.2.2.1.81 | sensorProbeTimeZone | 0 | 0 | sensorProbeTimeZone OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "System time zone" |
| 1.3.6.1.4.1.3854.1.2.2.1.83 | sensorProbeMegaVersion | 0 | 0 | sensorProbeMegaVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Version number of mega board" |
| 1.3.6.1.4.1.3854.1.2.2.1.84 | sensorProbeNtpMode | 0 | 0 | sensorProbeNtpMode OBJECT-TYPE SYNTAX INTEGER { notUse(0), oneTime(1), onSystemStartUp(2), onceAMounth(3), onceAWeek(4), onceAD… |
| 1.3.6.1.4.1.3854.1.2.2.1.85 | sensorProbeNtpServer | 0 | 0 | sensorProbeNtpServer OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "NTP server which this mac… |
| 1.3.6.1.4.1.3854.1.2.2.1.87 | sensorProbeSMTPAuth | 0 | 0 | sensorProbeSMTPAuth OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This e… |
| 1.3.6.1.4.1.3854.1.2.2.1.88 | sensorProbeSMTPLogin | 0 | 0 | sensorProbeSMTPLogin OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The username used to logi… |
| 1.3.6.1.4.1.3854.1.2.2.1.89 | sensorProbeSMTPPassword | 0 | 0 | sensorProbeSMTPPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The password used to l… |
| 1.3.6.1.4.1.3854.1.2.2.1.90 | sensorProbeDNSServer | 0 | 0 | sensorProbeDNSServer OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP address of the DNS server" |
| 1.3.6.1.4.1.3854.1.2.2.1.91 | sensorProbeAltWebPort | 0 | 0 | sensorProbeAltWebPort OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "The alternative for a port numbe… |
| 1.3.6.1.4.1.3854.1.2.2.1.92 | sensorProbeNumberOfSensorPort | 0 | 0 | sensorProbeNumberOfSensorPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of sensor po… |
| 1.3.6.1.4.1.3854.1.2.2.1.93 | sensorProbeSendTrapsAlive | 0 | 0 | sensorProbeSendTrapsAlive OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "On or of… |
| 1.3.6.1.4.1.3854.1.2.2.1.94 | sensorProbeTrapReIntervalAlive | 0 | 0 | sensorProbeTrapReIntervalAlive OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Time between each kee… |
| 1.3.6.1.4.1.3854.1.2.2.1.95 | sensorProbeUseCamera | 0 | 0 | sensorProbeUseCamera OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "On or off cam… |
| 1.3.6.1.4.1.3854.1.2.2.1.96 | sensorProbeAdcCalibratePort | 0 | 0 | sensorProbeAdcCalibratePort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Calibrate value for anal… |
| 1.3.6.1.4.1.3854.1.2.2.1.98 | sensorProbeMailSubject | 0 | 0 | sensorProbeMailSubject OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Email Subject." |
| 1.3.6.1.4.1.3854.1.2.2.1.99 | sensorProbeSnmpPort | 0 | 0 | sensorProbeSnmpPort OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "SP Only: Port number used to acces… |
| 1.3.6.1.4.1.3854.1.2.2.1.100 | sensorProbeSnmpTrapPort | 0 | 0 | sensorProbeSnmpTrapPort OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "SP Only: Port number used to a… |
| 1.3.6.1.4.1.3854.1.2.2.1.101 | sensorProbeSnmpIndexingMode | 0 | 0 | sensorProbeSnmpIndexingMode OBJECT-TYPE SYNTAX INTEGER { index0(0), index1(1) } ACCESS read-write STATUS mandatory DESCRIPTION … |
| 1.3.6.1.4.1.3854.1.2.2.1.103 | sensorProbeNotifyBoot | 0 | 0 | sensorProbeNotifyBoot OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "SP2 Only: Enable Notify on boo… |
| 1.3.6.1.4.1.3854.1.2.2.1.104 | sensorProbeDelayNotifyBoot | 0 | 0 | sensorProbeDelayNotifyBoot OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "SP2 Only: Delay time for … |
| 1.3.6.1.4.1.3854.1.2.2.1.105 | sensorProbeSmtpPort | 0 | 0 | sensorProbeSmtpPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "SMTP Port number used to send em… |
| 1.3.6.1.4.1.3854.1.2.2.1.106 | sensorProbeReboot | 0 | 0 | sensorProbeReboot OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Reboot SP2/SP8 set to 1" |
| 1.3.6.1.4.1.3854.1.2.2.1.107 | sensorProbeServerEnable | 0 | 0 | sensorProbeServerEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "En… |
| 1.3.6.1.4.1.3854.1.2.2.1.108 | sensorProbeFirmwareVersion | 0 | 0 | sensorProbeFirmwareVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Current firmware ver… |
| 1.3.6.1.4.1.3854.1.2.2.1.109 | sensorProbeProductType | 0 | 0 | sensorProbeProductType OBJECT-TYPE SYNTAX INTEGER { sensorProbe2(1), sensorProbe8(2), sensorProbeLinuxWithoutUSB(3), sensorProb… |
| 1.3.6.1.4.1.3854.1.2.2.1.110 | sensorProbeRequestResendTrap | 0 | 0 | sensorProbeRequestResendTrap OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "SP only: Send immediate… |
| 1.3.6.1.4.1.3854.1.2.2.1.112 | sensorProbeSeparateEmail | 0 | 0 | sensorProbeSeparateEmail OBJECT-TYPE SYNTAX INTEGER { notSeparate(0), separate(1) } ACCESS read-write STATUS mandatory DESCRIPT… |
| 1.3.6.1.4.1.3854.1.2.2.1.113 | sensorProbeMailCustom | 0 | 0 | sensorProbeMailCustom OBJECT-TYPE SYNTAX INTEGER { normal(0), custom(1) } ACCESS read-write STATUS mandatory DESCRIPTION "SP on… |
| 1.3.6.1.4.1.3854.1.2.2.1.114 | sensorProbeUntidePassword | 0 | 0 | sensorProbeUntidePassword OBJECT-TYPE SYNTAX INTEGER { tidePassword(0), untidePassword(1) } ACCESS read-write STATUS mandatory … |
| 1.3.6.1.4.1.3854.1.2.2.1.115 | sensorProbeWebPassword | 2 | 2 | None |
| 1.3.6.1.4.1.3854.1.2.2.1.116 | sensorProbeReloadNetwork | 0 | 0 | sensorProbeReloadNetwork OBJECT-TYPE SYNTAX INTEGER { reload(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set 1 for rel… |
| 1.3.6.1.4.1.3854.1.2.2.1.117 | sensorProbeStatusNumber | 3 | 3 | None |
| 1.3.6.1.4.1.3854.1.2.2.1.118 | sensorProbeTypeName | 34 | 34 | None |
| 1.3.6.1.4.1.3854.1.2.2.1.119 | sensorProbeProductRevision | 0 | 0 | sensorProbeProductRevision OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SP only: Revision number" |