Description the Wlan.
Parsed from file WS-CC-RF-MIB.mib.txt
Company: motorola
Module: WS-CC-RF-MIB
Vendor: Motorola
Module: WS-CC-RF-MIB (WS-CC-RF-MIB.mib)
Type: TABULAR
Access: read-write
Syntax: DisplayString
( SIZE (
0..32 ) )
Automatically extracted from www.mibdepot.com
wsCcRfWlanDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Description the Wlan." ::= { wsCcRfWlanEntry 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.388.14.3.2.1.14.1.1.1 | wsCcRfWlanIndex | 0 | 0 | Simple index. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.2 | wsCcRfWlanEnable | 0 | 0 | Enable/Disable wireless Lan. If this wlan is referenced by wsCcRfRadioBssWlanMap, a set to disabled mode will fail. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.4 | wsCcRfWlanEssid | 0 | 0 | ESSID of the WLAN. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.5 | wsCcRfWlanVlan | 0 | 0 | The Vlan this Wlan is associated with. If not associated with any Vlan, this value will be 0. This object's functionality has no… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.6 | wsCcRfWlanDisallowMuToMu | 0 | 0 | Set to true to prohibit MU-to-MU communication. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.7 | wsCcRfWlanSecBeacon | 0 | 0 | Enable the Secure Beacon checkbox to disallow the Access Port from broadcasting an ESSID in its beacons. This is a safeguard to p… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.8 | wsCcRfWlanVoicePrioritization | 0 | 0 | Enable voice prioritization. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.9 | wsCcRfWlanAnswerBroadcastEss | 0 | 0 | Answer broadcast ESS. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.10 | wsCcRfWlanMulticastAddr1 | 0 | 0 | Multicast address 1. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.11 | wsCcRfWlanMulticastAddr2 | 0 | 0 | Multicast address 2. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.12 | wsCcRfWlanWeight | 0 | 0 | The weight to be used when QoS for all WLANs is set to weighted-round-robin. Note that the sum of all weights across all WLANs ne… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.13 | wsCcRfWlanWmmEnable | 0 | 0 | Enable/Disable WMM on this wireless LAN |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.14 | wsCcRfWlanSvpEnable | 0 | 0 | Enable/Disable support for Spectralink Voice Prioritization on this wireless LAN |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.15 | wsCcRfWlanAuthentication | 0 | 0 | If auth802dot1xEap, additional EAP settings for this WLAN will be used from the matching entry in the wireless authentication. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.16 | wsCcRfWlanEncryptionMap | 0 | 0 | ** this needs to be a bitmap of enc types ** If cryptoWep64 or cryptoWep128, additional WEP settings for this WLAN will be used f… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.17 | wsCcRfWlanBcastEnc | 0 | 0 | The broadcast encryption type in use on a WLAN. In most cases it is same as the unicast encryption type. When multiple encryption… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.18 | wsCcRfWlanNumRadiosAdopted | 0 | 0 | Number of radios adopted. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.19 | wsCcRfWlanUseDscp | 0 | 0 | Use Dscp when tagged. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.20 | wsCcRfWlanMuIdleTime | 0 | 0 | The number of seconds for which if the switch does not receive/send any data frames from/to an MU, it disassociates the MU. If an… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.21 | wsCcRfWlanMobilityEnable | 0 | 0 | Description. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.22 | wsCcRfWlanGRETunnelIdx | 0 | 0 | Description. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.23 | wsCcRfWlanGRETunnelGatewayIp | 0 | 0 | Description. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.24 | wsCcRfWlanGRETunnelGatewayMask | 0 | 0 | Description. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.25 | wsCcRfWlanMuToMu | 0 | 0 | States the mode of operation for MU-to-MU communications in the wireless switch. drop(1): traffic is not relayed to other MUs. al… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.26 | wsCcRfWlanQosPrioritization | 0 | 0 | Sets the prioritization of the WLAN for QoS purposes. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.27 | wsCcRfWlanDynamicVlanAssignment | 0 | 0 | Enables or disables dynamic VLAN assignment for the WLAN. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.28 | wsCcRfWlanAccountingType | 0 | 0 | Indicates if the accounting type is Radius, Syslog or turned off. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.29 | wsCcRfWlanSyslogServerIp | 0 | 0 | IP Address of the Syslog server |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.30 | wsCcRfWlanSyslogServerPort | 0 | 0 | Port of the Syslog Server |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.31 | wsCcRfWlanNacMode | 0 | 0 | Set NAC mode to 1. Do NAC validation for all MU's except one in exclude list 2. By pass NAC validation for all MU's but include… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.32 | wsCcRfWlanQosWeight | 0 | 0 | Sets the weight of a WLAN. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.33 | wsCcRfWlanHoldTime | 0 | 0 | Hold time in seconds. The user credentials would hold for this much time when it leaves or roams away. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.34 | wsCcRfWlanIndependentModeEnable | 0 | 0 | If true, it means that the Independent mode for this WLAN is enabled. That allows it to be used by AAPs. A false value means that… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.35 | wsCcRfWlanClientBridgeBackhaulEnable | 0 | 0 | Enable client bridge backhaul. Requires wsCcRfWlanIndependentModeEnable to be True for this flag to be enabled. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.36 | wsCcRfWlanHttpAlgEnable | 0 | 0 | This object is used to enable or disable the HTTP ALG for this WLAN. Setting this object to true enables the HTTP ALG for the WL… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.37 | wsCcRfWlanRateLimitingUp | 0 | 0 | Rate limit in uplink direction, from wireless client to network. The rate is per wireless client and is in the range of <100-1,000,000> kbps. If…100-1,000,000> |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.38 | wsCcRfWlanRateLimitingDown | 0 | 0 | Rate limit in downlink direction, from network to wireless client. The rate is per wireless client and is in the range of <100-1,000,000> kbps. …100-1,000,000> |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.39 | wsCcRfWlan80211wMFPCfgStatus | 0 | 0 | The Management Frame Protection (MFP) configuration status for this WLAN. It can be set to: none(1), optional(2) or required(3).… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.40 | wsCcRfWlanSAQueryMaxTimeout | 0 | 0 | Specifies SA query maximum timeout in milliseconds. The default setting for max-timeout is This setting is only valid when ws… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.41 | wsCcRfWlanSAQueryRetryTimeout | 0 | 0 | Specifies SA query retry timeout in milliseconds. The default setting for retry-timeout is This setting is only valid when ws… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.42 | wsCcRfWlanDot11iSha256Enabled | 0 | 0 | Setting it to true(1) enables SHA-256 based stronger key generation algorithm to be used. This object is intended for future use… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.43 | wsCcRfWlanDenyStaticMUEnable | 0 | 0 | Setting this object to true enables dropping of packets from mobile-units not present in L3 extended ACL table. If DHCP is enfor… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.44 | wsCcRfWlanAltAuthentication | 0 | 0 | Alternate object for WLAN authentication method. wsCcRfWlanAltEncryption must have the required value before setting this object. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.45 | wsCcRfWlanDot11Authentication | 0 | 0 | Authentication algorithm. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.46 | wsCcRfWlanSecurity | 0 | 0 | Security method. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.47 | wsCcRfWlanAltEncryption | 0 | 0 | Alternate object for WLAN authentication method. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.48 | wsCcRfWlanHotspotFailOverModeEnable | 0 | 0 | Hotspot fail over mode for wlan. |