Vendor: UTStarcom Incorporated
Module: NMC-MIB
[Automatically extracted from oidview.com]
nmcCfg OBJECT IDENTIFIER ::= { nmc 1 }
nmcCfg OBJECT IDENTIFIER ::= { nmc 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.1.2.1.1 | nmcCfgSystemTime | 1 | 1 | This parameter is used to set and read the current time as kept by the NMC's real-time clock. It should be set to the local time… |
| 1.3.6.1.4.1.429.1.2.1.2 | nmcCfgSystemDate | 1 | 1 | This parameter is used to set and read the current date as kept by the NMC's real-time clock. It should be set to the local date… |
| 1.3.6.1.4.1.429.1.2.1.3 | nmcGmtime | 1 | 1 | This object reflects the current time in Greenwich Mean Time (GMT). The value of this object is sent in USR's enterprise specifi… |
| 1.3.6.1.4.1.429.1.2.1.4 | nmcTimezone | 1 | 1 | This object should be set to reflect the timezone in which the chassis is physically located. It is used in the conversion from … |
| 1.3.6.1.4.1.429.1.2.1.5 | nmcCfgAuthFailTrapEnable | 1 | 1 | This object indicates whether or not the SNMP Proxy Agent running in the Network Management Card is to send a trap upon reception… |
| 1.3.6.1.4.1.429.1.2.1.6 | nmcDaySavingTime | 1 | 1 | The value of this object determines whether or not the NMC will honor daylight savings time when converting from local time to Gr… |
| 1.3.6.1.4.1.429.1.2.1.7 | nmcCfgWanDialOutPhoneNum | 1 | 1 | This is the phone number that the NMC will use to dial a modem that is connected to the WAN port if there is no existing connecti… |
| 1.3.6.1.4.1.429.1.2.1.8 | nmcCfgAtString | 1 | 1 | This object is the user defined AT string that will be used to configure a modem connected to the NMC's WAN port if the NMC needs… |
| 1.3.6.1.4.1.429.1.2.1.9 | nmcPowerUpAutoCfgEnable | 1 | 1 | This parameter defines whether or not to automatically configure cards when they are inserted into the chassis or when the chassi… |
| 1.3.6.1.4.1.429.1.2.1.10 | nmcCfgNumWanRetries | 1 | 1 | This will specify the number of attempts to be made by port_write_task() to send the packet out of the WAN port while doing a dia… |
| 1.3.6.1.4.1.429.1.2.1.11 | nmcCfgWanRetryPause | 1 | 1 | The amount of time in seconds that the NMC will pause between attempts to transmit a packet. The default value for this object is… |
| 1.3.6.1.4.1.429.1.2.1.12 | nmcCfgWanRetrySuspendTime | 1 | 1 | The Time period in seconds for which the WAN port should suspend its attempts to send out the packet. This time period applies wh… |
| 1.3.6.1.4.1.429.1.2.1.13 | nmcCfgNumFailBefSuspend | 1 | 1 | The number of connection failures to allow before suspending retries. |
| 1.3.6.1.4.1.429.1.2.1.14 | nmcCfgLogSrvrSelect | 1 | 1 | The server selection for event logging. Default=none(3). |
| 1.3.6.1.4.1.429.1.2.1.15 | nmcCfgLogPriSrvrAddr | 1 | 1 | The primary logging server's IP address. |
| 1.3.6.1.4.1.429.1.2.1.16 | nmcCfgLogSecSrvrAddr | 1 | 1 | The secondary logging server's IP address. |
| 1.3.6.1.4.1.429.1.2.1.17 | nmcCfgLogUdpPortNum | 1 | 1 | The logging server's UDP port number. Default=1646. |
| 1.3.6.1.4.1.429.1.2.1.18 | nmcCfgLogRetryCnt | 1 | 1 | The NMC logging client transmission retry count. Default=3. |
| 1.3.6.1.4.1.429.1.2.1.19 | nmcCfgLogCallStatGrpSel | 1 | 1 | The optional call statistics groups included in log messages. Groups are Usage(1), Data Transfer(2), Performance(3), Operating M… |
| 1.3.6.1.4.1.429.1.2.1.20 | nmcCfgLogMD5Calc | 1 | 1 | This Optional Object will indicate to the accounting Client whether to calculate MD5 for accounting request message or not. defau… |
| 1.3.6.1.4.1.429.1.2.1.21 | nmcCfgTFTPTimeout | 1 | 1 | This object will be used to set up the timeout for the TFTP retries. The default would be 12 sec and the maximum allowed timeout… |
| 1.3.6.1.4.1.429.1.2.1.22 | nmcCfgDnsPriSrvrAddr | 1 | 1 | The primary DNS server's IP address. |
| 1.3.6.1.4.1.429.1.2.1.23 | nmcCfgDnsSecSrvrAddr | 1 | 1 | The secondary DNS server's IP address. |
| 1.3.6.1.4.1.429.1.2.1.24 | nmcCfgLog3SrvrAddr | 1 | 1 | The third backup logging server IP address to use. |
| 1.3.6.1.4.1.429.1.2.1.25 | nmcCfgLog4SrvrAddr | 1 | 1 | The fourth backup logging server IP address to use. |
| 1.3.6.1.4.1.429.1.2.1.26 | nmcCfgLog5SrvrAddr | 1 | 1 | The fifth backup logging server IP address to use. |
| 1.3.6.1.4.1.429.1.2.1.27 | nmcCfgLog6SrvrAddr | 1 | 1 | The sixth backup logging server IP address to use. |
| 1.3.6.1.4.1.429.1.2.1.28 | nmcCfgLog7SrvrAddr | 1 | 1 | The seventh backup logging server IP address to use. |
| 1.3.6.1.4.1.429.1.2.1.29 | nmcCfgLog8SrvrAddr | 1 | 1 | The eighth backup logging server IP address to use. |
| 1.3.6.1.4.1.429.1.2.1.30 | nmcCfgLogSrvrName | 1 | 1 | The host name of the logging server. Used to resolve logging server IP addresses through DNS query requests from the resolver. |
| 1.3.6.1.4.1.429.1.2.1.31 | nmcCfgDnsRetryCnt | 1 | 1 | The maximum number of retries that will be attempted to query a DNS before trying the secondary DNS. |
| 1.3.6.1.4.1.429.1.2.1.32 | nmcCfgDnsUdpPortNum | 1 | 1 | The logging server's UDP port number. Default=53. |
| 1.3.6.1.4.1.429.1.2.1.33 | nmcCfgDnsSrvrSelect | 1 | 1 | The server selection for DNS. Default=none(1). |
| 1.3.6.1.4.1.429.1.2.1.34 | nmcCfgLogDnsEna | 1 | 1 | Indicates whether logging server host address DNS resolution is enabled or disabled. Disabled, the logging server addresses are t… |
| 1.3.6.1.4.1.429.1.2.1.35 | nmcCfgLogStatusInterval | 1 | 1 | This value defines the interval in seconds between Status-Server requests for a failed RADIUS Accounting server connection. Defaul… |
| 1.3.6.1.4.1.429.1.2.1.36 | nmcCfgDnsSrvrFailure | 1 | 1 | This value defines the failure reason for last failure of DNS resolver query. |
| 1.3.6.1.4.1.429.1.2.1.37 | nmcCfgLogSrvrFailure | 1 | 1 | This value defines the failure reason for the last failure of RADIUS accounting server access. |
| 1.3.6.1.4.1.429.1.2.1.38 | nmcCfgSessionIDNewFmt | 1 | 1 | This Object is used to Enable/Disable the New Session ID Format. Default is Disable. |
| 1.3.6.1.4.1.429.1.2.1.39 | nmcCfgPersistentState | 1 | 1 | When set to enable this object requires the NMC apply the most recently saved NAC operational states from the NMC NVRAM to the NA… |
| 1.3.6.1.4.1.429.1.2.1.40 | nmcCfgHistIntervalTimer | 1 | 1 | This object sets the timer for the history interval in minutes. Default = 15. |
| 1.3.6.1.4.1.429.1.2.1.41 | nmcCfgAlignHistToRTC | 1 | 1 | This object is used to enable aligning history intervals to the system time. Default = disable. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.1.2.2 | nmcStat | 17 | 34 | None |
| 1.3.6.1.4.1.429.1.2.3 | nmcTrap | 3 | 9 | None |
| 1.3.6.1.4.1.429.1.2.4 | nmcCmd | 7 | 14 | None |
| 1.3.6.1.4.1.429.1.2.6 | nmcHs | 37 | 74 | None |
| 1.3.6.1.4.1.429.1.2.7 | nmcTe | 27 | 54 | None |
| 1.3.6.1.4.1.429.1.2.8 | nmcUiCfg | 15 | 30 | None |
| 1.3.6.1.4.1.429.1.2.9 | nmcAuth | 1 | 5 | None |
| 1.3.6.1.4.1.429.1.2.10 | nmcNtp | 8 | 16 | None |