Vendor: UTStarcom Incorporated
Module: NMC-MIB
[Automatically extracted from oidview.com]
nmcStat OBJECT IDENTIFIER ::= { nmc 2 }
nmcStat OBJECT IDENTIFIER ::= { nmc 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.1.2.2.1 | nmcStatStatus | 1 | 1 | This object will indicate the general status or health of the Network Management Card. |
| 1.3.6.1.4.1.429.1.2.2.2 | nmcStatDramInstalled | 1 | 1 | This object indicates the amount of dynamic RAM currently installed on the Network Management Card. The units for this value are… |
| 1.3.6.1.4.1.429.1.2.2.3 | nmcStatNVRAMInstalled | 1 | 1 | This object indicates the amount of non-volatile RAM currently installed on the Network Management Card. The units for this valu… |
| 1.3.6.1.4.1.429.1.2.2.4 | nmcStatEventId | 1 | 1 | This value increments once for each network management event detected by the NMC. It is used to correlate SNMP traps with events… |
| 1.3.6.1.4.1.429.1.2.2.5 | nmcStatTemperature | 1 | 1 | This object reflects the current temperature in the NAS chassis, as detected by the NMC. The value of this object indicates the … |
| 1.3.6.1.4.1.429.1.2.2.6 | nmcStatPowerUpTstFailures | 1 | 1 | This object contains the number of power up tests which failed during the power up of the NMC card. |
| 1.3.6.1.4.1.429.1.2.2.7 | nmcStatPowerUpTstFailBMap | 1 | 1 | This object defines a bit map which contains a one in the postion that indicates a power up test failure. The number returned is… |
| 1.3.6.1.4.1.429.1.2.2.8 | nmcStatTestResult | 1 | 1 | This object contains the bit mapped result of the request to perform a self test. A non zero value indicates that there has been… |
| 1.3.6.1.4.1.429.1.2.2.9 | nmcStatCompSwVer | 1 | 1 | This object contains the software compatibility version. |
| 1.3.6.1.4.1.429.1.2.2.10 | nmcStatPktBusClkSrc | 1 | 1 | The source of the backplane packet bus clock. |
| 1.3.6.1.4.1.429.1.2.2.11 | nmcStatNmcPktBusClk | 1 | 1 | The NMC's packet bus clock status. |
| 1.3.6.1.4.1.429.1.2.2.12 | nmcStatRedLed | 1 | 1 | This Object will return the Reason why the Hub Status LED is RED. |
| 1.3.6.1.4.1.429.1.2.2.13 | nmcAuxIn1Sts | 1 | 1 | This Object shows status of Aux Input port1. |
| 1.3.6.1.4.1.429.1.2.2.14 | nmcAuxIn2Sts | 1 | 1 | This Object shows status of Aux Input port2. |
| 1.3.6.1.4.1.429.1.2.2.15 | nmcAuxOut1Sts | 1 | 1 | This Object shows status of Aux Output port1. |
| 1.3.6.1.4.1.429.1.2.2.16 | nmcAuxOut2Sts | 1 | 1 | This Object shows status of Aux Output port2. |
| 1.3.6.1.4.1.429.1.2.2.17 | nmcStatValHistIntervals | 1 | 1 | This object gives the quantity of valid history intervals in the interval array (0..104). |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.1.2.1 | nmcCfg | 41 | 82 | None |
| 1.3.6.1.4.1.429.1.2.3 | nmcTrap | 3 | 9 | None |
| 1.3.6.1.4.1.429.1.2.4 | nmcCmd | 7 | 14 | None |
| 1.3.6.1.4.1.429.1.2.6 | nmcHs | 37 | 74 | None |
| 1.3.6.1.4.1.429.1.2.7 | nmcTe | 27 | 54 | None |
| 1.3.6.1.4.1.429.1.2.8 | nmcUiCfg | 15 | 30 | None |
| 1.3.6.1.4.1.429.1.2.9 | nmcAuth | 1 | 5 | None |
| 1.3.6.1.4.1.429.1.2.10 | nmcNtp | 8 | 16 | None |