Vendor: UTStarcom Incorporated
Module: NMC-MIB
[Automatically extracted from oidview.com]
nmcUiCfg OBJECT IDENTIFIER ::= { nmc 8 }
nmcUiCfg OBJECT IDENTIFIER ::= { nmc 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.1.2.8.1 | nmcUiCfgLanIPAddr | 1 | 1 | This contains the IP address of the LAN interface. |
| 1.3.6.1.4.1.429.1.2.8.2 | nmcUiCfgLanSubnetMask | 1 | 1 | This specifies the subnet mask for LAN interface. |
| 1.3.6.1.4.1.429.1.2.8.3 | nmcUiCfgWanIPAddr | 1 | 1 | This specifies the IP address for the WAN interface. |
| 1.3.6.1.4.1.429.1.2.8.4 | nmcUiCfgWanSubnetMask | 1 | 1 | This specifies the Subnet mask for the WAN interface. |
| 1.3.6.1.4.1.429.1.2.8.5 | nmcUiCfgDefaultGwyIP | 1 | 1 | This specifies the address of the Gateway to which the IP will forward those packets whose net ID does not match the net ID of ei… |
| 1.3.6.1.4.1.429.1.2.8.6 | nmcUiCfgLocalTrIeeeAddr | 1 | 1 | This gives the IEEE physical address of the Token Ring interface. |
| 1.3.6.1.4.1.429.1.2.8.7 | nmcUiCfgPrivateString | 1 | 1 | This specifies the SNMP read-write community string. Default='private'. |
| 1.3.6.1.4.1.429.1.2.8.8 | nmcUiCfgLanIfEnable | 1 | 1 | This parameter controls the enable/disable of the LAN interface. |
| 1.3.6.1.4.1.429.1.2.8.9 | nmcUiCfgPublicString | 1 | 1 | This specifies the SNMP read-only community string. Default='public'. |
| 1.3.6.1.4.1.429.1.2.8.10 | nmcUiCfgRouteEnable | 1 | 1 | This Parameter controls the ability of the NMC to route traffic between it's LAN and SLIP interfaces, Default = enable(1). |
| 1.3.6.1.4.1.429.1.2.8.11 | nmcUiCfgUiSlipCfg | 1 | 1 | This is used to configure the UI port as SLIP or UI. Default=UI. |
| 1.3.6.1.4.1.429.1.2.8.12 | nmcUiCfgWan2IpAddr | 1 | 1 | This contains the IP address of second SLIP port. |
| 1.3.6.1.4.1.429.1.2.8.13 | nmcUiCfgWan2SubnetMask | 1 | 1 | This contains SubnetMask for Second Slip port. |
| 1.3.6.1.4.1.429.1.2.8.14 | nmcUiCfgInactiveTime | 1 | 1 | This parameter is in minutes it is used as an Inactivity time on the UI port. The Default is 3 minutes and 0 minutes disables the… |
| 1.3.6.1.4.1.429.1.2.8.15 | nmcUiCfgPassword | 1 | 1 | This parameter is used to Enable or Disable the PASSWORD protection for UI functions. Default = disabled. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.1.2.1 | nmcCfg | 41 | 82 | None |
| 1.3.6.1.4.1.429.1.2.2 | nmcStat | 17 | 34 | None |
| 1.3.6.1.4.1.429.1.2.3 | nmcTrap | 3 | 9 | None |
| 1.3.6.1.4.1.429.1.2.4 | nmcCmd | 7 | 14 | None |
| 1.3.6.1.4.1.429.1.2.6 | nmcHs | 37 | 74 | None |
| 1.3.6.1.4.1.429.1.2.7 | nmcTe | 27 | 54 | None |
| 1.3.6.1.4.1.429.1.2.9 | nmcAuth | 1 | 5 | None |
| 1.3.6.1.4.1.429.1.2.10 | nmcNtp | 8 | 16 | None |