An arbitary 32-bit integer value defined by the user
to be used with Addressless interfaces. This
addresslessIfIndex will bind with the configured OSPF
INTF addresslessIfIndex, if one was configured.
Parsed from file USR-USER-MAN-MIB.mib.txt
Company: None
Module: USR-USER-MAN-MIB
An arbitary 32-bit integer value defined by the user
to be used with Addressless interfaces. This
addresslessIfIndex will bind with the configured OSPF
INTF addresslessIfIndex, if one was configured.
Parsed from file USR-USER-MAN-MIB.mib
Module: USR-USER-MAN-MIB
Vendor: UTStarcom Incorporated
Module: USR-USER-MAN-MIB
[Automatically extracted from oidview.com]
uumOspfAddresslessIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "An arbitary 32-bit integer value defined by the user to be used with Addressless interfaces. This addresslessIfIndex will bind with the configured OSPF INTF addresslessIfIndex, if one was configured." ::= { uumEntry 136 }
uumOspfAddresslessIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "An arbitary 32-bit integer value defined by the user to be used with Addressless interfaces. This addresslessIfIndex will bind with the configured OSPF INTF addresslessIfIndex, if one was configured." ::= { uumEntry 136 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.429.4.2.1.25.1.86 | uumIgmpInterfaceStatus, uumATMSustainableCellRate | 0 | 0 | The ATM Sustainable Cell Rate |
| 1.3.6.1.4.1.429.4.2.1.25.1.87 | uumIgmpInterfaceMcastFwdEnabled, uumATMBurstTolerance | 0 | 0 | The ATM Burst Tolerance |
| 1.3.6.1.4.1.429.4.2.1.25.1.88 | uumIpxRipUpdate, uumPatDefaultPrivAddr | 0 | 0 | When the NatOption is configured for PAT and a frame is received from the Public Net on a port which does not have a private addr… |
| 1.3.6.1.4.1.429.4.2.1.25.1.89 | uumIpxRipAgeMultiplier, uumIpSrcValidationOption | 0 | 0 | If enabled, the source address on incoming frames will be validated. If a route does not exist for the source address on the sam… |
| 1.3.6.1.4.1.429.4.2.1.25.1.90 | uumIpxSapUpdate, uumUserDesignation | 0 | 0 | The users designated type. |
| 1.3.6.1.4.1.429.4.2.1.25.1.91 | uumIpxSapAgeMultiplier, uumATMVcType | 0 | 0 | The type of vc (permanent or switched). |
| 1.3.6.1.4.1.429.4.2.1.25.1.92 | uumEncryptionAlgorithm, uumOwnership | 0 | 0 | To identify the VC created by auto provisionsing process or some other processes |
| 1.3.6.1.4.1.429.4.2.1.25.1.93 | uumTunnelType, uumMacEncapsulatedRouting | 0 | 0 | To identify that routed frames will be transmitted out the WAN ports prepended with a MAC header. |
| 1.3.6.1.4.1.429.4.2.1.25.1.94 | uumTunnelMediumType, uumIpIntelligentNat | 0 | 0 | Only applicable when uumIpPatOption is set to pat. When enabled and processing an incoming frame without an existing translation… |
| 1.3.6.1.4.1.429.4.2.1.25.1.95 | uumTunnelClientEndpoint, uumIpDynamicAddrProto | 0 | 0 | Protocol used to dynamically learn the IP configuration when the network service is NOT PPP. Current options are DHCP and Inver… |
| 1.3.6.1.4.1.429.4.2.1.25.1.96 | uumTunnelServerEndpoint, uumMgmtIpAddress | 0 | 0 | Management IP address. When configured, this address can be used to access the device and will be used as the source address b… |
| 1.3.6.1.4.1.429.4.2.1.25.1.97 | uumTunnelPassword, uumMgmtIpNetmask | 0 | 0 | The netmask of the Management Network, associated with the uumMgmtIpAddress |
| 1.3.6.1.4.1.429.4.2.1.25.1.98 | uumTunnelPrivateGroupID, uumInternalCallToProto | 1 | 1 | Internal field used to specify which Protocol Handler CIP should call for this profile. VATM is the default. |
| 1.3.6.1.4.1.429.4.2.1.25.1.99 | uumTunnelSecurity | 0 | 0 | The security level of the tunnel. |
| 1.3.6.1.4.1.429.4.2.1.25.1.100 | uumPrimaryDNSServer | 0 | 0 | The primary dns server for the user |
| 1.3.6.1.4.1.429.4.2.1.25.1.101 | uumSecondaryDNSServer | 0 | 0 | The secondary DNS server for the user |
| 1.3.6.1.4.1.429.4.2.1.25.1.102 | uumUserTapStatus | 0 | 0 | Is this user to be tapped |
| 1.3.6.1.4.1.429.4.2.1.25.1.103 | uumUserTapFormat | 0 | 0 | The tap format if tap is enabled |
| 1.3.6.1.4.1.429.4.2.1.25.1.104 | uumUserTapOutput | 0 | 0 | Send the tapped output to syslog |
| 1.3.6.1.4.1.429.4.2.1.25.1.105 | uumUserTapFacility | 0 | 0 | The syslog facility to send the output to. |
| 1.3.6.1.4.1.429.4.2.1.25.1.106 | uumUserTapLoglevel | 0 | 0 | The syslog level to send the output to. |
| 1.3.6.1.4.1.429.4.2.1.25.1.107 | uumUserTapAddress | 0 | 0 | The syslogd address |
| 1.3.6.1.4.1.429.4.2.1.25.1.108 | uumMulticastProxy | 0 | 0 | If Multicast will be proxied |
| 1.3.6.1.4.1.429.4.2.1.25.1.113 | uumNasIpAddress | 0 | 0 | The NAS IP address |
| 1.3.6.1.4.1.429.4.2.1.25.1.114 | uumNasPort | 0 | 0 | The NAS Port Attribute |
| 1.3.6.1.4.1.429.4.2.1.25.1.115 | uumFramedCallbackId | 0 | 0 | Framed Callback Identifier attribute |
| 1.3.6.1.4.1.429.4.2.1.25.1.116 | uumState | 0 | 0 | State attribute |
| 1.3.6.1.4.1.429.4.2.1.25.1.117 | uumClass | 0 | 0 | Class attribute |
| 1.3.6.1.4.1.429.4.2.1.25.1.118 | uumCalledStationId | 0 | 0 | Called Station Id |
| 1.3.6.1.4.1.429.4.2.1.25.1.119 | uumCallingStationId | 0 | 0 | Calling Station Id |
| 1.3.6.1.4.1.429.4.2.1.25.1.120 | uumNasIdentifier | 0 | 0 | NAS ID |
| 1.3.6.1.4.1.429.4.2.1.25.1.121 | uumCipIfName | 0 | 0 | CIP Interface Name |
| 1.3.6.1.4.1.429.4.2.1.25.1.122 | uumPPPLocalIpAddress | 0 | 0 | PPP Local IP Address |
| 1.3.6.1.4.1.429.4.2.1.25.1.123 | uumPPPRemoteIpAddress | 0 | 0 | PPP Remote IP Address |
| 1.3.6.1.4.1.429.4.2.1.25.1.126 | uumSessionvars | 0 | 0 | None |
| 1.3.6.1.4.1.429.4.2.1.25.1.127 | uumChatScriptName | 0 | 0 | The chat script name configured for the user |
| 1.3.6.1.4.1.429.4.2.1.25.1.128 | uumPortLimit | 0 | 0 | None |
| 1.3.6.1.4.1.429.4.2.1.25.1.129 | uumPppSourceIpFilter | 0 | 0 | PPP Source Address Ip Filer |
| 1.3.6.1.4.1.429.4.2.1.25.1.130 | uumNextHopGateway | 0 | 0 | The VPN-neighbour. |
| 1.3.6.1.4.1.429.4.2.1.25.1.131 | uumCallbackType | 0 | 0 | The Callback Type. Normal to dial callback users using the existing phone number field. ANI to dial callback users using the nu… |
| 1.3.6.1.4.1.429.4.2.1.25.1.132 | uumIsdnDataCallType | 0 | 0 | The ISDN customized CallType. The values represent a series of AT commands that users of the profile can generate. For 'cleared'… |
| 1.3.6.1.4.1.429.4.2.1.25.1.133 | uumIpRoutingRipV1 | 0 | 0 | Enables or disables the IP RIPv1 routing protocol for this User |
| 1.3.6.1.4.1.429.4.2.1.25.1.134 | uumIpRoutingRipV2 | 0 | 0 | Enables or disables the IP RIPv2 routing protocol for this User |
| 1.3.6.1.4.1.429.4.2.1.25.1.135 | uumIpRoutingOspf | 0 | 0 | Enables or disables the IP OSPF routing protocol for this User |
| 1.3.6.1.4.1.429.4.2.1.25.1.139 | uumDNISReAuth | 0 | 0 | DNIS Re-Authentication flag |
| 1.3.6.1.4.1.429.4.2.1.25.1.140 | uumReChapTimeout | 0 | 0 | Re Chap timeout for PPP |
| 1.3.6.1.4.1.429.4.2.1.25.1.141 | uumLocalTcpPort | 0 | 0 | Local TCP port of telnet/CTCP login user |
| 1.3.6.1.4.1.429.4.2.1.25.1.144 | uumConnectionvars | 0 | 0 | None |
| 1.3.6.1.4.1.429.4.2.1.25.1.145 | uumShowConnVar | 0 | 0 | For the CLI command show connection |
| 1.3.6.1.4.1.429.4.2.1.25.1.155 | uumIpSecPolicyFile | 0 | 0 | The name of IP Security Policy filename associated with that user. This feature is available from Hiper ARC 5.0 release onwards. |
| 1.3.6.1.4.1.429.4.2.1.25.1.156 | uumIpSecPolicyAccess | 0 | 0 | This flag defines whether the IP Security policy access is enabled or disabled. This feature is available from Hiper ARC 5.0 rele… |
| 1.3.6.1.4.1.429.4.2.1.25.1.157 | uumIpSecPolicyType | 0 | 0 | This flag defines whether the IP Security policy type is user-based or domain-based. This feature is available from Hiper ARC 5.0… |
| 1.3.6.1.4.1.429.4.2.1.25.1.158 | uumIpSecPolicyConfiguration | 0 | 0 | This flag specifies whether IP Security Policy is applied in statically or dynamically. This feature is available only from Hiper… |
| 1.3.6.1.4.1.429.4.2.1.25.1.160 | uumSpecialXonXoff | 0 | 0 | Special Xon Xoff flow control \n |
| 1.3.6.1.4.1.429.4.2.1.25.1.161 | uumTelnetOptions | 0 | 0 | User specific Telnet Options \n |
| 1.3.6.1.4.1.429.4.2.1.25.1.162 | uumVPNGateway | 0 | 0 | The VPN-Gateway. |
| 1.3.6.1.4.1.429.4.2.1.25.1.163 | uumVPNID | 0 | 0 | The VPN-ID. |
| 1.3.6.1.4.1.429.4.2.1.25.1.164 | uumVPNName | 0 | 0 | The VPN-Name. |
| 1.3.6.1.4.1.429.4.2.1.25.1.165 | uumMlPPPFragThreshold | 0 | 0 | Multilink fragmentation threshold |
| 1.3.6.1.4.1.429.4.2.1.25.1.167 | uumTrafficThreshold | 0 | 0 | traffic threshold based idle timeout |
| 1.3.6.1.4.1.429.4.2.1.25.1.168 | uumTunnelAssignmentId | 0 | 0 | The name of the L2TP/PPTP tunnel that may be created for the user. |
| 1.3.6.1.4.1.429.4.2.1.25.1.169 | uumKeepAliveInterval | 0 | 0 | The TCP Keep Alive Interval in seconds |
| 1.3.6.1.4.1.429.4.2.1.25.1.174 | uumTunnelClientAuthId | 0 | 0 | Replaces the System Transmit Auth Name. This name is now sent instead of the System Xmit Auth Name by the PDSN to authenticate an… |
| 1.3.6.1.4.1.429.4.2.1.25.1.176 | uumCorrelationId | 0 | 0 | Call Correlation Id |
| ... | ||||