When the NatOption is configured for PAT and a frame
is received from the Public Net on a port which does not
have a private address mapping, the frame will be
mapped to the PatDefaultPrivAddr if it is configured. If
the PatDefaultPrivAddr is not configured, 0.0.0.0, the
frame will be discarded.
Parsed from file usrUserMan-MIB.mib.txt
Company: None
Module: usrUserMan-MIB
When the NatOption is configured for PAT and a frame
is received from the Public Net on a port which does not
have a private address mapping, the frame will be
mapped to the PatDefaultPrivAddr if it is configured. If
the PatDefaultPrivAddr is not configured, 0.0.0.0, the
frame will be discarded.
Parsed from file UsrUserMan-MIB.mib
Module: UsrUserMan-MIB
Vendor: UTStarcom Incorporated
Module: USR-USER-MAN-MIB
[Automatically extracted from oidview.com]
uumPatDefaultPrivAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "When the NatOption is configured for PAT and a frame is received from the Public Net on a port which does not have a private address mapping, the frame will be mapped to the PatDefaultPrivAddr if it is configured. If the PatDefaultPrivAddr is not configured, 0.0.0.0, the frame will be discarded." ::= { uumEntry 88 }
uumPatDefaultPrivAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "When the NatOption is configured for PAT and a frame is received from the Public Net on a port which does not have a private address mapping, the frame will be mapped to the PatDefaultPrivAddr if it is configured. If the PatDefaultPrivAddr is not configured, 0.0.0.0, the frame will be discarded." ::= { uumEntry 88 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.429.4.2.1.25.1.38 | uumFilterIdOutput | 0 | 0 | The output filter defined for the user |
| 1.3.6.1.4.1.429.4.2.1.25.1.39 | uumAppletalk | 0 | 0 | Appletalk enabled or disabled |
| 1.3.6.1.4.1.429.4.2.1.25.1.40 | uumBridging | 0 | 0 | Bridging enabled or disabled |
| 1.3.6.1.4.1.429.4.2.1.25.1.41 | uumSpoofing | 0 | 0 | Ipx spoofing enabled or disabled |
| 1.3.6.1.4.1.429.4.2.1.25.1.42 | uumHostType | 0 | 0 | The means for specifying a host for this user |
| 1.3.6.1.4.1.429.4.2.1.25.1.43 | uumSendName | 0 | 0 | Name we use when challenged for authentication |
| 1.3.6.1.4.1.429.4.2.1.25.1.44 | uumSendPassword | 0 | 0 | Password we use when challenged for authentication |
| 1.3.6.1.4.1.429.4.2.1.25.1.45 | uumStartTime | 0 | 0 | Daily time we start timed location |
| 1.3.6.1.4.1.429.4.2.1.25.1.46 | uumEndTime | 0 | 0 | Daily time we stop timed location |
| 1.3.6.1.4.1.429.4.2.1.25.1.47 | uumSendScript1 | 0 | 0 | The first send script for this dial-out user |
| 1.3.6.1.4.1.429.4.2.1.25.1.48 | uumReplyScript1 | 0 | 0 | The first reply script for this dial-out user |
| 1.3.6.1.4.1.429.4.2.1.25.1.49 | uumSendScript2 | 0 | 0 | The second send script for this dial-out user |
| 1.3.6.1.4.1.429.4.2.1.25.1.50 | uumReplyScript2 | 0 | 0 | The second reply script for this dial-out user |
| 1.3.6.1.4.1.429.4.2.1.25.1.51 | uumSendScript3 | 0 | 0 | The third send script for this dial-out user |
| 1.3.6.1.4.1.429.4.2.1.25.1.52 | uumReplyScript3 | 0 | 0 | The third reply script for this dial-out user |
| 1.3.6.1.4.1.429.4.2.1.25.1.53 | uumSendScript4 | 0 | 0 | The fourth send script for this dial-out user |
| 1.3.6.1.4.1.429.4.2.1.25.1.54 | uumReplyScript4 | 0 | 0 | The fourth reply script for this dial-out user |
| 1.3.6.1.4.1.429.4.2.1.25.1.55 | uumSendScript5 | 0 | 0 | The fifth send script for this dial-out user |
| 1.3.6.1.4.1.429.4.2.1.25.1.56 | uumReplyScript5 | 0 | 0 | The fifth reply script for this dial-out user |
| 1.3.6.1.4.1.429.4.2.1.25.1.57 | uumSendScript6 | 0 | 0 | The sixth send script for this dial-out user |
| 1.3.6.1.4.1.429.4.2.1.25.1.58 | uumReplyScript6 | 0 | 0 | The sixth reply script for this dial-out user |
| 1.3.6.1.4.1.429.4.2.1.25.1.59 | uumTerminalType | 0 | 0 | The terminal type for the user |
| 1.3.6.1.4.1.429.4.2.1.25.1.60 | uumAppletalkNetworkRange | 0 | 0 | The appletalk network range for the user |
| 1.3.6.1.4.1.429.4.2.1.25.1.61 | uumLocalIpAddress | 0 | 0 | The local ip address configured for a dial-out user |
| 1.3.6.1.4.1.429.4.2.1.25.1.62 | uumRoutingProtocol | 0 | 0 | The routing protocol configured for a user |
| 1.3.6.1.4.1.429.4.2.1.25.1.63 | uumCallbackNumberTwo | 0 | 0 | The first phone number configured for this user |
| 1.3.6.1.4.1.429.4.2.1.25.1.64 | uumModemGroup | 0 | 0 | The modem group string for the user |
| 1.3.6.1.4.1.429.4.2.1.25.1.65 | uumIpxRouting | 0 | 0 | The ipx routing defined for a framed user |
| 1.3.6.1.4.1.429.4.2.1.25.1.66 | uumIpxWan | 0 | 0 | Is ipx wan enabled or disabled for the user |
| 1.3.6.1.4.1.429.4.2.1.25.1.67 | uumIpRipSendDefault | 0 | 0 | IP RIP flag |
| 1.3.6.1.4.1.429.4.2.1.25.1.68 | uumIpRipSendRoutes | 0 | 0 | IP RIP flag |
| 1.3.6.1.4.1.429.4.2.1.25.1.69 | uumIpRipSendSubnets | 0 | 0 | IP RIP flag |
| 1.3.6.1.4.1.429.4.2.1.25.1.70 | uumIpRipAcceptDefault | 0 | 0 | IP RIP flag |
| 1.3.6.1.4.1.429.4.2.1.25.1.71 | uumIpRipSplitHorizon | 0 | 0 | IP RIP flag |
| 1.3.6.1.4.1.429.4.2.1.25.1.72 | uumIpRipPoisonReverse | 0 | 0 | IP RIP flag |
| 1.3.6.1.4.1.429.4.2.1.25.1.73 | uumIpRipFlashUpdate | 0 | 0 | IP RIP flag |
| 1.3.6.1.4.1.429.4.2.1.25.1.74 | uumIpRipSimpleAuth | 0 | 0 | IP RIP flag |
| 1.3.6.1.4.1.429.4.2.1.25.1.75 | uumIpRipV1Send | 0 | 0 | IP RIP flag |
| 1.3.6.1.4.1.429.4.2.1.25.1.76 | uumIpRipV1Receive | 0 | 0 | IP RIP flag |
| 1.3.6.1.4.1.429.4.2.1.25.1.77 | uumIpRipV2Receive | 0 | 0 | IP RIP flag |
| 1.3.6.1.4.1.429.4.2.1.25.1.78 | uumIpRipSilent | 0 | 0 | IP RIP flag |
| 1.3.6.1.4.1.429.4.2.1.25.1.79 | uumSimpleAuthPassword | 0 | 0 | The IP RIP simple authentication password |
| 1.3.6.1.4.1.429.4.2.1.25.1.80 | uumIpDefaultRouteOption | 0 | 0 | If enable (1) a default route will be created using the remote users IP address. If disable (2) no such route is created. |
| 1.3.6.1.4.1.429.4.2.1.25.1.81 | uumLoginHostName, uumIpPatOption | 0 | 0 | Network Address Translation (NAT) option field. When NAT is enabled, the local LAN addresses are replaced with public recoginze… |
| 1.3.6.1.4.1.429.4.2.1.25.1.82 | uumIgmpInterfaceQueryInterval, uumATMCategoryOfService | 0 | 0 | The ATM category of service |
| 1.3.6.1.4.1.429.4.2.1.25.1.83 | uumIgmpInterfaceQueryMaxResponseTime, uumATMVpi | 0 | 0 | The ATM Virtual Path Id |
| 1.3.6.1.4.1.429.4.2.1.25.1.84 | uumIgmpInterfaceRobustness, uumATMVci | 0 | 0 | The ATM Virtual Channel Id |
| 1.3.6.1.4.1.429.4.2.1.25.1.85 | uumIgmpInterfaceVersion, uumATMPeakCellRate | 0 | 0 | The ATM Peak Cell Rate |
| 1.3.6.1.4.1.429.4.2.1.25.1.86 | uumIgmpInterfaceStatus, uumATMSustainableCellRate | 0 | 0 | The ATM Sustainable Cell Rate |
| 1.3.6.1.4.1.429.4.2.1.25.1.87 | uumIgmpInterfaceMcastFwdEnabled, uumATMBurstTolerance | 0 | 0 | The ATM Burst Tolerance |
| 1.3.6.1.4.1.429.4.2.1.25.1.89 | uumIpxRipAgeMultiplier, uumIpSrcValidationOption | 0 | 0 | If enabled, the source address on incoming frames will be validated. If a route does not exist for the source address on the sam… |
| 1.3.6.1.4.1.429.4.2.1.25.1.90 | uumIpxSapUpdate, uumUserDesignation | 0 | 0 | The users designated type. |
| 1.3.6.1.4.1.429.4.2.1.25.1.91 | uumIpxSapAgeMultiplier, uumATMVcType | 0 | 0 | The type of vc (permanent or switched). |
| 1.3.6.1.4.1.429.4.2.1.25.1.92 | uumEncryptionAlgorithm, uumOwnership | 0 | 0 | To identify the VC created by auto provisionsing process or some other processes |
| 1.3.6.1.4.1.429.4.2.1.25.1.93 | uumTunnelType, uumMacEncapsulatedRouting | 0 | 0 | To identify that routed frames will be transmitted out the WAN ports prepended with a MAC header. |
| 1.3.6.1.4.1.429.4.2.1.25.1.94 | uumTunnelMediumType, uumIpIntelligentNat | 0 | 0 | Only applicable when uumIpPatOption is set to pat. When enabled and processing an incoming frame without an existing translation… |
| 1.3.6.1.4.1.429.4.2.1.25.1.95 | uumTunnelClientEndpoint, uumIpDynamicAddrProto | 0 | 0 | Protocol used to dynamically learn the IP configuration when the network service is NOT PPP. Current options are DHCP and Inver… |
| 1.3.6.1.4.1.429.4.2.1.25.1.96 | uumTunnelServerEndpoint, uumMgmtIpAddress | 0 | 0 | Management IP address. When configured, this address can be used to access the device and will be used as the source address b… |
| 1.3.6.1.4.1.429.4.2.1.25.1.97 | uumTunnelPassword, uumMgmtIpNetmask | 0 | 0 | The netmask of the Management Network, associated with the uumMgmtIpAddress |
| 1.3.6.1.4.1.429.4.2.1.25.1.98 | uumTunnelPrivateGroupID, uumInternalCallToProto | 1 | 1 | Internal field used to specify which Protocol Handler CIP should call for this profile. VATM is the default. |
| 1.3.6.1.4.1.429.4.2.1.25.1.99 | uumTunnelSecurity | 0 | 0 | The security level of the tunnel. |
| 1.3.6.1.4.1.429.4.2.1.25.1.100 | uumPrimaryDNSServer | 0 | 0 | The primary dns server for the user |
| 1.3.6.1.4.1.429.4.2.1.25.1.101 | uumSecondaryDNSServer | 0 | 0 | The secondary DNS server for the user |
| 1.3.6.1.4.1.429.4.2.1.25.1.102 | uumUserTapStatus | 0 | 0 | Is this user to be tapped |
| 1.3.6.1.4.1.429.4.2.1.25.1.103 | uumUserTapFormat | 0 | 0 | The tap format if tap is enabled |
| 1.3.6.1.4.1.429.4.2.1.25.1.104 | uumUserTapOutput | 0 | 0 | Send the tapped output to syslog |
| 1.3.6.1.4.1.429.4.2.1.25.1.105 | uumUserTapFacility | 0 | 0 | The syslog facility to send the output to. |
| 1.3.6.1.4.1.429.4.2.1.25.1.106 | uumUserTapLoglevel | 0 | 0 | The syslog level to send the output to. |
| 1.3.6.1.4.1.429.4.2.1.25.1.107 | uumUserTapAddress | 0 | 0 | The syslogd address |
| 1.3.6.1.4.1.429.4.2.1.25.1.108 | uumMulticastProxy | 0 | 0 | If Multicast will be proxied |
| 1.3.6.1.4.1.429.4.2.1.25.1.113 | uumNasIpAddress | 0 | 0 | The NAS IP address |
| 1.3.6.1.4.1.429.4.2.1.25.1.114 | uumNasPort | 0 | 0 | The NAS Port Attribute |
| 1.3.6.1.4.1.429.4.2.1.25.1.115 | uumFramedCallbackId | 0 | 0 | Framed Callback Identifier attribute |
| 1.3.6.1.4.1.429.4.2.1.25.1.116 | uumState | 0 | 0 | State attribute |
| 1.3.6.1.4.1.429.4.2.1.25.1.117 | uumClass | 0 | 0 | Class attribute |
| 1.3.6.1.4.1.429.4.2.1.25.1.118 | uumCalledStationId | 0 | 0 | Called Station Id |
| 1.3.6.1.4.1.429.4.2.1.25.1.119 | uumCallingStationId | 0 | 0 | Calling Station Id |
| 1.3.6.1.4.1.429.4.2.1.25.1.120 | uumNasIdentifier | 0 | 0 | NAS ID |
| 1.3.6.1.4.1.429.4.2.1.25.1.121 | uumCipIfName | 0 | 0 | CIP Interface Name |
| 1.3.6.1.4.1.429.4.2.1.25.1.122 | uumPPPLocalIpAddress | 0 | 0 | PPP Local IP Address |
| 1.3.6.1.4.1.429.4.2.1.25.1.123 | uumPPPRemoteIpAddress | 0 | 0 | PPP Remote IP Address |
| 1.3.6.1.4.1.429.4.2.1.25.1.126 | uumSessionvars | 0 | 0 | None |
| 1.3.6.1.4.1.429.4.2.1.25.1.127 | uumChatScriptName | 0 | 0 | The chat script name configured for the user |
| 1.3.6.1.4.1.429.4.2.1.25.1.128 | uumPortLimit | 0 | 0 | None |
| 1.3.6.1.4.1.429.4.2.1.25.1.129 | uumPppSourceIpFilter | 0 | 0 | PPP Source Address Ip Filer |
| 1.3.6.1.4.1.429.4.2.1.25.1.130 | uumNextHopGateway | 0 | 0 | The VPN-neighbour. |
| 1.3.6.1.4.1.429.4.2.1.25.1.131 | uumCallbackType | 0 | 0 | The Callback Type. Normal to dial callback users using the existing phone number field. ANI to dial callback users using the nu… |
| 1.3.6.1.4.1.429.4.2.1.25.1.132 | uumIsdnDataCallType | 0 | 0 | The ISDN customized CallType. The values represent a series of AT commands that users of the profile can generate. For 'cleared'… |
| 1.3.6.1.4.1.429.4.2.1.25.1.133 | uumIpRoutingRipV1 | 0 | 0 | Enables or disables the IP RIPv1 routing protocol for this User |
| 1.3.6.1.4.1.429.4.2.1.25.1.134 | uumIpRoutingRipV2 | 0 | 0 | Enables or disables the IP RIPv2 routing protocol for this User |
| 1.3.6.1.4.1.429.4.2.1.25.1.135 | uumIpRoutingOspf | 0 | 0 | Enables or disables the IP OSPF routing protocol for this User |
| 1.3.6.1.4.1.429.4.2.1.25.1.136 | uumOspfAddresslessIfIndex | 0 | 0 | An arbitary 32-bit integer value defined by the user to be used with Addressless interfaces. This addresslessIfIndex will bind wi… |
| ... | ||||