Vendor: 3Com
Module: A3Com-IPextns-MIB (a3Com-ip.mib)
Type: OBJ ID
Access:
Syntax:
Automatically extracted from www.mibdepot.com
a3ComIPextns OBJECT IDENTIFIER ::= { brouterMIB 6 }
a3ComIPextns OBJECT IDENTIFIER ::= { brouterMIB 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.43.2.6.1 | a3IPextMode | 1 | 1 | This object determines the mode the IP protocol layer operates in. When in multipleNet mode, the system will accept different ne… |
1.3.6.1.4.1.43.2.6.2 | a3IPextFlushCtl | 1 | 1 | When set to 2, this object can be used to remove all dynamically learned entries from the IP routing table. When set to 3, this o… |
1.3.6.1.4.1.43.2.6.3 | a3IPextRelaySrcRteCtl | 1 | 1 | This object is used to control the relaying of packets that contain the Loose or Strict source route option. If this object is se… |
1.3.6.1.4.1.43.2.6.4 | a3IPextSplitLoadCtl | 1 | 1 | This object is used to control load splitting. If split (1), is specified, the traffic load is distributed among a set of least-… |
1.3.6.1.4.1.43.2.6.5 | a3IPicmpInfoCtl | 1 | 1 | This object determines whether this system replies to ICMP Information request packets. If this object is set to info (1), repli… |
1.3.6.1.4.1.43.2.6.6 | a3IPicmpMaskCtl | 1 | 1 | This object determines whether this system replies to ICMP Address Mask request packets. If this object is set to mask (1), repl… |
1.3.6.1.4.1.43.2.6.7 | a3IPntmExtTable | 1 | 5 | This table is an extension of the ipNetToMediaTable from mibII. Currently, this table contains objects for controlling MAC heade… |
1.3.6.1.4.1.43.2.6.8 | a3IPaddrConfigTable | 1 | 8 | This table contains the IP addresses assigned to each IP port. |
1.3.6.1.4.1.43.2.6.9 | a3IPforwardExtTable | 1 | 6 | An extension to the ipForwardTable. |
1.3.6.1.4.1.43.2.6.10 | a3IParpOverBlocked | 1 | 1 | When the system is in singleNet mode (ie, it is in a bridge state), this parameter controls whether or not ARP request and replie… |
1.3.6.1.4.1.43.2.6.11 | a3IPrarpClientCtl | 1 | 1 | This allows the RARP client function to be enabled or disabled. If enabled, this system will send RARP requests. If disabled, t… |
1.3.6.1.4.1.43.2.6.12 | a3IPrarpServerCtl | 1 | 1 | This allows the RARP server function to be enabled or disabled. If enabled, this system will respond to RARP requests. If disab… |
1.3.6.1.4.1.43.2.6.13 | a3IParpConfigTable | 1 | 7 | This table contains ARP configuration information. |
1.3.6.1.4.1.43.2.6.14 | a3IPsmdsGaTable | 1 | 4 | This table contains a set of IP network address to SMDS Group Address pairings. |
1.3.6.1.4.1.43.2.6.15 | a3IPx25configTable | 1 | 7 | This table contains a set of X25 configuration parameters relating to routing IP over x25 networks. |
1.3.6.1.4.1.43.2.6.16 | a3IPqueuePriority | 1 | 1 | This object, which is used by the Multiple Priority Queue feature, specifies into which queue IP packets are placed. If this obje… |
1.3.6.1.4.1.43.2.6.17 | a3IPfwdSubnetBcast | 1 | 1 | None |
1.3.6.1.4.1.43.2.6.18 | a3IPicmpGenTable | 1 | 5 | This table contains ICMP configuration information. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.43.2.7 | a3ComIPX | 11 | 104 | None |
1.3.6.1.4.1.43.2.8 | a3ComRipIp | 10 | 72 | None |
1.3.6.1.4.1.43.2.9 | a3ComBridge | 3 | 92 | None |
1.3.6.1.4.1.43.2.10 | a3ComFilter | 6 | 62 | None |
1.3.6.1.4.1.43.2.11 | a3ComIPXpol | 5 | 66 | None |
1.3.6.1.4.1.43.2.12 | a3ComIPSO | 5 | 26 | None |
1.3.6.1.4.1.43.2.13 | a3ComSys | 13 | 239 | None |
1.3.6.1.4.1.43.2.16 | a3ComPath | 2 | 32 | None |
1.3.6.1.4.1.43.2.17 | a3ComPort | 3 | 31 | None |
1.3.6.1.4.1.43.2.18 | a3ComPathDial | 2 | 19 | None |
1.3.6.1.4.1.43.2.19 | a3ComPortDial | 4 | 33 | None |
1.3.6.1.4.1.43.2.23 | a3ComMLN | 10 | 55 | None |
1.3.6.1.4.1.43.2.24 | dlswMIB-3Com | 7 | 156 | None |
1.3.6.1.4.1.43.2.25 | sdlc | 3 | 112 | None |
1.3.6.1.4.1.43.2.26 | llc | 4 | 134 | None |
1.3.6.1.4.1.43.2.27 | a3ComMIP | 3 | 23 | None |
1.3.6.1.4.1.43.2.28 | a3ComDVMRP | 3 | 100 | None |
1.3.6.1.4.1.43.2.29 | a3ComAuditLog | 2 | 18 | None |