This table contains a set of X25 configuration
parameters relating to routing IP over x25 networks.
Parsed from file a3Com-ip.mib.txt
Company: None
Module: A3Com-IPextns-MIB
This table contains a set of X25 configuration
parameters relating to routing IP over x25 networks.
Parsed from file A3Com-IPextns-r5-MIB.mib
Module: A3Com-IPextns-r5-MIB
Vendor: 3Com
Module: A3Com-IPextns-MIB (a3Com-ip.mib)
Type: TABLE
Access: not-accessible
Syntax: SEQUENCE OF
Automatically extracted from www.mibdepot.com
a3IPx25configTable OBJECT-TYPE SYNTAX SEQUENCE OF A3IPx25configEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains a set of X25 configuration parameters relating to routing IP over x25 networks." ::= { a3ComIPextns 15 }
a3IPx25configTable OBJECT-TYPE SYNTAX SEQUENCE OF A3IPx25configEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains a set of X25 configuration parameters relating to routing IP over x25 networks." ::= { a3ComIPextns 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.2.6.15.1 | a3IPx25configEntry | 6 | 6 | Each entry contains a set of x25 configuration parameters relating to routing IP over a specific port. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.2.6.1 | a3IPextMode | 1 | 1 | This object determines the mode the IP protocol layer operates in. When in multipleNet mode, the system will accept different ne… |
| 1.3.6.1.4.1.43.2.6.2 | a3IPextFlushCtl | 1 | 1 | When set to 2, this object can be used to remove all dynamically learned entries from the IP routing table. When set to 3, this o… |
| 1.3.6.1.4.1.43.2.6.3 | a3IPextRelaySrcRteCtl | 1 | 1 | This object is used to control the relaying of packets that contain the Loose or Strict source route option. If this object is se… |
| 1.3.6.1.4.1.43.2.6.4 | a3IPextSplitLoadCtl | 1 | 1 | This object is used to control load splitting. If split (1), is specified, the traffic load is distributed among a set of least-… |
| 1.3.6.1.4.1.43.2.6.5 | a3IPicmpInfoCtl | 1 | 1 | This object determines whether this system replies to ICMP Information request packets. If this object is set to info (1), repli… |
| 1.3.6.1.4.1.43.2.6.6 | a3IPicmpMaskCtl | 1 | 1 | This object determines whether this system replies to ICMP Address Mask request packets. If this object is set to mask (1), repl… |
| 1.3.6.1.4.1.43.2.6.7 | a3IPntmExtTable | 1 | 5 | This table is an extension of the ipNetToMediaTable from mibII. Currently, this table contains objects for controlling MAC heade… |
| 1.3.6.1.4.1.43.2.6.8 | a3IPaddrConfigTable | 1 | 8 | This table contains the IP addresses assigned to each IP port. |
| 1.3.6.1.4.1.43.2.6.9 | a3IPforwardExtTable | 1 | 6 | An extension to the ipForwardTable. |
| 1.3.6.1.4.1.43.2.6.10 | a3IParpOverBlocked | 1 | 1 | When the system is in singleNet mode (ie, it is in a bridge state), this parameter controls whether or not ARP request and replie… |
| 1.3.6.1.4.1.43.2.6.11 | a3IPrarpClientCtl | 1 | 1 | This allows the RARP client function to be enabled or disabled. If enabled, this system will send RARP requests. If disabled, t… |
| 1.3.6.1.4.1.43.2.6.12 | a3IPrarpServerCtl | 1 | 1 | This allows the RARP server function to be enabled or disabled. If enabled, this system will respond to RARP requests. If disab… |
| 1.3.6.1.4.1.43.2.6.13 | a3IParpConfigTable | 1 | 7 | This table contains ARP configuration information. |
| 1.3.6.1.4.1.43.2.6.14 | a3IPsmdsGaTable | 1 | 4 | This table contains a set of IP network address to SMDS Group Address pairings. |
| 1.3.6.1.4.1.43.2.6.16 | a3IPqueuePriority | 1 | 1 | This object, which is used by the Multiple Priority Queue feature, specifies into which queue IP packets are placed. If this obje… |
| 1.3.6.1.4.1.43.2.6.17 | a3IPfwdSubnetBcast | 1 | 1 | None |
| 1.3.6.1.4.1.43.2.6.18 | a3IPicmpGenTable | 1 | 5 | This table contains ICMP configuration information. |