This object is used to control the relaying of packets
that contain the Loose or Strict source route option.
If this object is set to relay (1), those packets are
relayed. If this object is set to discard (2), those
packets are discarded.
Parsed from file a3Com-ip.mib.txt
Company: None
Module: A3Com-IPextns-MIB
This object is used to control the relaying of packets
that contain the Loose or Strict source route option.
If this object is set to relay (1), those packets are
relayed. If this object is set to discard (2), those
packets are discarded.
Parsed from file A3Com-IPextns-r5-MIB.mib
Module: A3Com-IPextns-r5-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
a3IPextRelaySrcRteCtl OBJECT-TYPE SYNTAX INTEGER { relay (1), discard (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to control the relaying of packets that contain the Loose or Strict source route option. If this object is set to relay (1), those packets are relayed. If this object is set to discard (2), those packets are discarded." DEFVAL { discard } ::= { a3ComIPextns 3 }
a3IPextRelaySrcRteCtl OBJECT-TYPE SYNTAX INTEGER { relay (1), discard (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to control the relaying of packets that contain the Loose or Strict source route option. If this object is set to relay (1), those packets are relayed. If this object is set to discard (2), those packets are discarded." DEFVAL { discard } ::= { a3ComIPextns 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.43.2.6.3.0 | a3IPextRelaySrcRteCtl | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.43.2.6.1 | a3IPextMode | 1 | 1 | This object determines the mode the IP protocol layer operates in. When in multipleNet mode, the system will accept different ne… |
1.3.6.1.4.1.43.2.6.2 | a3IPextFlushCtl | 1 | 1 | When set to 2, this object can be used to remove all dynamically learned entries from the IP routing table. When set to 3, this o… |
1.3.6.1.4.1.43.2.6.4 | a3IPextSplitLoadCtl | 1 | 1 | This object is used to control load splitting. If split (1), is specified, the traffic load is distributed among a set of least-… |
1.3.6.1.4.1.43.2.6.5 | a3IPicmpInfoCtl | 1 | 1 | This object determines whether this system replies to ICMP Information request packets. If this object is set to info (1), repli… |
1.3.6.1.4.1.43.2.6.6 | a3IPicmpMaskCtl | 1 | 1 | This object determines whether this system replies to ICMP Address Mask request packets. If this object is set to mask (1), repl… |
1.3.6.1.4.1.43.2.6.7 | a3IPntmExtTable | 1 | 5 | This table is an extension of the ipNetToMediaTable from mibII. Currently, this table contains objects for controlling MAC heade… |
1.3.6.1.4.1.43.2.6.8 | a3IPaddrConfigTable | 1 | 8 | This table contains the IP addresses assigned to each IP port. |
1.3.6.1.4.1.43.2.6.9 | a3IPforwardExtTable | 1 | 6 | An extension to the ipForwardTable. |
1.3.6.1.4.1.43.2.6.10 | a3IParpOverBlocked | 1 | 1 | When the system is in singleNet mode (ie, it is in a bridge state), this parameter controls whether or not ARP request and replie… |
1.3.6.1.4.1.43.2.6.11 | a3IPrarpClientCtl | 1 | 1 | This allows the RARP client function to be enabled or disabled. If enabled, this system will send RARP requests. If disabled, t… |
1.3.6.1.4.1.43.2.6.12 | a3IPrarpServerCtl | 1 | 1 | This allows the RARP server function to be enabled or disabled. If enabled, this system will respond to RARP requests. If disab… |
1.3.6.1.4.1.43.2.6.13 | a3IParpConfigTable | 1 | 7 | This table contains ARP configuration information. |
1.3.6.1.4.1.43.2.6.14 | a3IPsmdsGaTable | 1 | 4 | This table contains a set of IP network address to SMDS Group Address pairings. |
1.3.6.1.4.1.43.2.6.15 | a3IPx25configTable | 1 | 7 | This table contains a set of X25 configuration parameters relating to routing IP over x25 networks. |
1.3.6.1.4.1.43.2.6.16 | a3IPqueuePriority | 1 | 1 | This object, which is used by the Multiple Priority Queue feature, specifies into which queue IP packets are placed. If this obje… |
1.3.6.1.4.1.43.2.6.17 | a3IPfwdSubnetBcast | 1 | 1 | None |
1.3.6.1.4.1.43.2.6.18 | a3IPicmpGenTable | 1 | 5 | This table contains ICMP configuration information. |