The object is used to set the desired timing configuration
of an OAS system.
Setting this object to 'freerun(1)' depending on the
installed TGS3 option, causes one of the following results:
1. If the board in the MAIN slot does not have the
TGS3 card installed, the local oscillator on the board
is used as the synchronization source.
2. If the board in the MAIN slot has the TGS3 card
installed, the synchronization is derived from the TGS3 card.
Setting this object to 'external(2)' selects the
external BITS input as the timing source.
Setting this object to 'loop(3)' causes the timing
mode to switch loop-timed. When the object is set to
'loop', the 'qbTimingLoopInLineRef' must be set to an
appropriate ifindex.
The value holdover can not be set here. When qbTimingModeAdminStatus is loop(3), and
you set the qbTimingHoldoverCtl
to holdover, qbTimingModeAdminStatus will have a value of holdover
Parsed from file qbtiming.mib.txt
Company: None
Module: QB-TIMING-MIB
The object is used to set the desired timing configuration
of an OAS system.
Setting this object to 'freerun(1)' depending on the
installed TGS3 option, causes one of the following results:
1. If the board in the MAIN slot does not have the
TGS3 card installed, the local oscillator on the board
is used as the synchronization source.
2. If the board in the MAIN slot has the TGS3 card
installed, the synchronization is derived from the TGS3 card.
Setting this object to 'external(2)' selects the
external BITS input as the timing source.
Setting this object to 'loop(3)' causes the timing
mode to switch loop-timed. When the object is set to
'loop', the 'qbTimingLoopInLineRef' must be set to an
appropriate ifindex.
The value holdover can not be set here. When qbTimingModeAdminStatus is loop(3), and
you set the qbTimingHoldoverCtl
to holdover, qbTimingModeAdminStatus will have a value of holdover
Parsed from file QB-TIMING-MIB.mib
Module: QB-TIMING-MIB
Vendor: Quantum Bridge
Module: QB-TIMING-MIB
[Automatically extracted from oidview.com]
qbTimingModeAdminStatus OBJECT-TYPE SYNTAX INTEGER { freerun(1), external(2), loop(3), holdover(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The object is used to set the desired timing configuration of an OAS system. Setting this object to 'freerun(1)' depending on the installed TGS3 option, causes one of the following results: 1. If the board in the MAIN slot does not have the TGS3 card installed, the local oscillator on the board is used as the synchronization source. 2. If the board in the MAIN slot has the TGS3 card installed, the synchronization is derived from the TGS3 card. Setting this object to 'external(2)' selects the external BITS input as the timing source. Setting this object to 'loop(3)' causes the timing mode to switch loop-timed. When the object is set to 'loop', the 'qbTimingLoopInLineRef' must be set to an appropriate ifindex. The value holdover can not be set here. When qbTimingModeAdminStatus is loop(3), and you set the qbTimingHoldoverCtl to holdover, qbTimingModeAdminStatus will have a value of holdover" ::= { qbTimingGroup 1 }
qbTimingModeAdminStatus OBJECT-TYPE SYNTAX INTEGER { freerun(1), external(2), loop(3), holdover(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The object is used to set the desired timing configuration of an OAS system. Setting this object to 'freerun(1)' depending on the installed TGS3 option, causes one of the following results: 1. If the board in the MAIN slot does not have the TGS3 card installed, the local oscillator on the board is used as the synchronization source. 2. If the board in the MAIN slot has the TGS3 card installed, the synchronization is derived from the TGS3 card. Setting this object to 'external(2)' selects the external BITS input as the timing source. Setting this object to 'loop(3)' causes the timing mode to switch loop-timed. When the object is set to 'loop', the 'qbTimingLoopInLineRef' must be set to an appropriate ifindex. The value holdover can not be set here. When qbTimingModeAdminStatus is loop(3), and you set the qbTimingHoldoverCtl to holdover, qbTimingModeAdminStatus will have a value of holdover" ::= { qbTimingGroup 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4323.2.11.1.1.1.0 | qbTimingModeAdminStatus | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4323.2.11.1.1.2 | qbTimingModeOperStatus | 1 | 1 | The object indicates the actual status of the timing of an OAS system. A value 'notOperational(6)' indicates that the shelf doesn'… |
| 1.3.6.1.4.1.4323.2.11.1.1.3 | qbTimingOutputMode | 1 | 1 | This object is used to disable or enable the BITS output signals at the timing ports. Setting the object to 'lock' or track must … |
| 1.3.6.1.4.1.4323.2.11.1.1.4 | qbTimingHoldoverCtl | 1 | 1 | The object forces the OAS system into one of two states depending on whether the TGS3 is equipped. If the TGS3 card is not instal… |
| 1.3.6.1.4.1.4323.2.11.1.1.5 | qbTimingSourceStatus | 1 | 1 | This is used to switch the external output source to the primary or secondary source. Note: this object works in conjunction wit… |
| 1.3.6.1.4.1.4323.2.11.1.1.6 | qbTimingInLineRef | 1 | 1 | The value of ifIndex corresponding to the optical port interface that provides a source for the system time reference. The objec… |
| 1.3.6.1.4.1.4323.2.11.1.1.7 | qbTimingOutLineRef | 1 | 1 | The value of ifIndex corresponding to the port interface that provides a line reference for the external timing outputs. The obje… |
| 1.3.6.1.4.1.4323.2.11.1.1.8 | qbTimingPortTable | 1 | 10 | A list of timing port entries. The number of entries is 2 (timing_port1 and timing_port2). Every entry contains the following con… |