The object indicates the actual status of the timing
of an OAS system.
A value 'notOperational(6)' indicates that the
shelf doesn't have operational timing equpment
available.
A value 'freerun(1) indicates the free-running timing
mode.
A value 'external(2)' indicates the external timing
mode of the shelf.
A value 'loop(3)' indicates the loop-timed timing
mode of the shelf.
A value 'holdoverMntc(4)' indicates the timing mode
was intentionally switched to 'holdover' by setting
'qbTimingHooldover' to 'holdover'.
A value 'holdoverAuto(5)' indicates the timing mode
was intentionally switched due to hardware problems
Parsed from file qbtiming.mib.txt
Company: None
Module: QB-TIMING-MIB
The object indicates the actual status of the timing
of an OAS system.
A value 'notOperational(6)' indicates that the
shelf doesn't have operational timing equpment
available.
A value 'freerun(1) indicates the free-running timing
mode.
A value 'external(2)' indicates the external timing
mode of the shelf.
A value 'loop(3)' indicates the loop-timed timing
mode of the shelf.
A value 'holdoverMntc(4)' indicates the timing mode
was intentionally switched to 'holdover' by setting
'qbTimingHooldover' to 'holdover'.
A value 'holdoverAuto(5)' indicates the timing mode
was intentionally switched due to hardware problems
Parsed from file QB-TIMING-MIB.mib
Module: QB-TIMING-MIB
Vendor: Quantum Bridge
Module: QB-TIMING-MIB
[Automatically extracted from oidview.com]
qbTimingModeOperStatus OBJECT-TYPE SYNTAX INTEGER { freerun(1), external(2), loop(3), holdoverMntc(4), holdoverAuto(5), notOperational(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the actual status of the timing of an OAS system. A value 'notOperational(6)' indicates that the shelf doesn't have operational timing equpment available. A value 'freerun(1) indicates the free-running timing mode. A value 'external(2)' indicates the external timing mode of the shelf. A value 'loop(3)' indicates the loop-timed timing mode of the shelf. A value 'holdoverMntc(4)' indicates the timing mode was intentionally switched to 'holdover' by setting 'qbTimingHooldover' to 'holdover'. A value 'holdoverAuto(5)' indicates the timing mode was intentionally switched due to hardware problems" ::= { qbTimingGroup 2 }
qbTimingModeOperStatus OBJECT-TYPE SYNTAX INTEGER { freerun(1), external(2), loop(3), holdoverMntc(4), holdoverAuto(5), notOperational(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the actual status of the timing of an OAS system. A value 'notOperational(6)' indicates that the shelf doesn't have operational timing equpment available. A value 'freerun(1) indicates the free-running timing mode. A value 'external(2)' indicates the external timing mode of the shelf. A value 'loop(3)' indicates the loop-timed timing mode of the shelf. A value 'holdoverMntc(4)' indicates the timing mode was intentionally switched to 'holdover' by setting 'qbTimingHooldover' to 'holdover'. A value 'holdoverAuto(5)' indicates the timing mode was intentionally switched due to hardware problems" ::= { qbTimingGroup 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4323.2.11.1.1.2.0 | qbTimingModeOperStatus | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4323.2.11.1.1.1 | qbTimingModeAdminStatus | 1 | 1 | The object is used to set the desired timing configuration of an OAS system. Setting this object to 'freerun(1)' depending on the… |
| 1.3.6.1.4.1.4323.2.11.1.1.3 | qbTimingOutputMode | 1 | 1 | This object is used to disable or enable the BITS output signals at the timing ports. Setting the object to 'lock' or track must … |
| 1.3.6.1.4.1.4323.2.11.1.1.4 | qbTimingHoldoverCtl | 1 | 1 | The object forces the OAS system into one of two states depending on whether the TGS3 is equipped. If the TGS3 card is not instal… |
| 1.3.6.1.4.1.4323.2.11.1.1.5 | qbTimingSourceStatus | 1 | 1 | This is used to switch the external output source to the primary or secondary source. Note: this object works in conjunction wit… |
| 1.3.6.1.4.1.4323.2.11.1.1.6 | qbTimingInLineRef | 1 | 1 | The value of ifIndex corresponding to the optical port interface that provides a source for the system time reference. The objec… |
| 1.3.6.1.4.1.4323.2.11.1.1.7 | qbTimingOutLineRef | 1 | 1 | The value of ifIndex corresponding to the port interface that provides a line reference for the external timing outputs. The obje… |
| 1.3.6.1.4.1.4323.2.11.1.1.8 | qbTimingPortTable | 1 | 10 | A list of timing port entries. The number of entries is 2 (timing_port1 and timing_port2). Every entry contains the following con… |