The object forces the OAS system into one of two
states depending on whether the TGS3 is equipped.
If the TGS3 card is not installed the set command fails.
Setting this object to 'holdover(1)', when the TGS3
card is installed,forces the OAS system into holdover
maintenance mod. Setting the value to 'holdover' is
only valid when the system 'qbTimingOperStatus' is either
'external' or 'loop'
Setting this object to 'clearholdover(2)' causes the
timing mode to reinstate the original timing mode and
can achieved if 'qbTimingOperStatus' is set to 'holdoverMntc'.
Parsed from file qbtiming.mib.txt
Company: None
Module: QB-TIMING-MIB
The object forces the OAS system into one of two
states depending on whether the TGS3 is equipped.
If the TGS3 card is not installed the set command fails.
Setting this object to 'holdover(1)', when the TGS3
card is installed,forces the OAS system into holdover
maintenance mod. Setting the value to 'holdover' is
only valid when the system 'qbTimingOperStatus' is either
'external' or 'loop'
Setting this object to 'clearholdover(2)' causes the
timing mode to reinstate the original timing mode and
can achieved if 'qbTimingOperStatus' is set to 'holdoverMntc'.
Parsed from file QB-TIMING-MIB.mib
Module: QB-TIMING-MIB
Vendor: Quantum Bridge
Module: QB-TIMING-MIB
[Automatically extracted from oidview.com]
qbTimingHoldoverCtl OBJECT-TYPE SYNTAX INTEGER { holdover(1), clearholdover(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The object forces the OAS system into one of two states depending on whether the TGS3 is equipped. If the TGS3 card is not installed the set command fails. Setting this object to 'holdover(1)', when the TGS3 card is installed,forces the OAS system into holdover maintenance mod. Setting the value to 'holdover' is only valid when the system 'qbTimingOperStatus' is either 'external' or 'loop' Setting this object to 'clearholdover(2)' causes the timing mode to reinstate the original timing mode and can achieved if 'qbTimingOperStatus' is set to 'holdoverMntc'." ::= { qbTimingGroup 4 }
qbTimingHoldoverCtl OBJECT-TYPE SYNTAX INTEGER { holdover(1), clearholdover(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The object forces the OAS system into one of two states depending on whether the TGS3 is equipped. If the TGS3 card is not installed the set command fails. Setting this object to 'holdover(1)', when the TGS3 card is installed,forces the OAS system into holdover maintenance mod. Setting the value to 'holdover' is only valid when the system 'qbTimingOperStatus' is either 'external' or 'loop' Setting this object to 'clearholdover(2)' causes the timing mode to reinstate the original timing mode and can achieved if 'qbTimingOperStatus' is set to 'holdoverMntc'." ::= { qbTimingGroup 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4323.2.11.1.1.4.0 | qbTimingHoldoverCtl | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4323.2.11.1.1.1 | qbTimingModeAdminStatus | 1 | 1 | The object is used to set the desired timing configuration of an OAS system. Setting this object to 'freerun(1)' depending on the… |
| 1.3.6.1.4.1.4323.2.11.1.1.2 | qbTimingModeOperStatus | 1 | 1 | The object indicates the actual status of the timing of an OAS system. A value 'notOperational(6)' indicates that the shelf doesn'… |
| 1.3.6.1.4.1.4323.2.11.1.1.3 | qbTimingOutputMode | 1 | 1 | This object is used to disable or enable the BITS output signals at the timing ports. Setting the object to 'lock' or track must … |
| 1.3.6.1.4.1.4323.2.11.1.1.5 | qbTimingSourceStatus | 1 | 1 | This is used to switch the external output source to the primary or secondary source. Note: this object works in conjunction wit… |
| 1.3.6.1.4.1.4323.2.11.1.1.6 | qbTimingInLineRef | 1 | 1 | The value of ifIndex corresponding to the optical port interface that provides a source for the system time reference. The objec… |
| 1.3.6.1.4.1.4323.2.11.1.1.7 | qbTimingOutLineRef | 1 | 1 | The value of ifIndex corresponding to the port interface that provides a line reference for the external timing outputs. The obje… |
| 1.3.6.1.4.1.4323.2.11.1.1.8 | qbTimingPortTable | 1 | 10 | A list of timing port entries. The number of entries is 2 (timing_port1 and timing_port2). Every entry contains the following con… |