This specifies the telephone numbers that
will be dialed when the backup port is activated.
To enter your own telephone number, use any
combination of the following characters:
0-9 Decimal
: Wait Tone
< Pause
= Seperator 3
> Seperator 4
P or p Dialing to be continued in PULSE mode.
T or t Dialing to be continued in DTMF mode.
& Flash
To have the modem dial one of its pre-programmed
telephone numbers, enter:
#n where 'n' identifies the pre-programmed
telephone number stored in the modem.
Parsed from file vanguard-65xx-ss.mib.txt
Company: None
Module: SS-OPT-MIB
This specifies the telephone numbers that
will be dialed when the backup port is activated.
To enter your own telephone number, use any
combination of the following characters:
0-9 Decimal
: Wait Tone
< Pause
= Seperator 3
> Seperator 4
P or p Dialing to be continued in PULSE mode.
T or t Dialing to be continued in DTMF mode.
& Flash
To have the modem dial one of its pre-programmed
telephone numbers, enter:
#n where 'n' identifies the pre-programmed
telephone number stored in the modem.
Parsed from file SS-OPT-MIB.mib
Module: SS-OPT-MIB
Vendor: Codex
Module: SS-OPT-MIB
[Automatically extracted from oidview.com]
cdx6500SSDialSequence OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the telephone numbers that will be dialed when the backup port is activated. To enter your own telephone number, use any combination of the following characters: 0-9 Decimal : Wait Tone < Pause = Seperator 3 > Seperator 4 P or p Dialing to be continued in PULSE mode. T or t Dialing to be continued in DTMF mode. & Flash To have the modem dial one of its pre-programmed telephone numbers, enter: #n where 'n' identifies the pre-programmed telephone number stored in the modem." ::= { cdx6500SSCfgEntry 5 }
cdx6500SSDialSequence OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the telephone numbers that will be dialed when the backup port is activated. To enter your own telephone number, use any combination of the following characters: 0-9 Decimal : Wait Tone < Pause = Seperator 3 > Seperator 4 P or p Dialing to be continued in PULSE mode. T or t Dialing to be continued in DTMF mode. & Flash To have the modem dial one of its pre-programmed telephone numbers, enter: #n where 'n' identifies the pre-programmed telephone number stored in the modem." ::= { cdx6500SSCfgEntry 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.449.2.1.2.2.14.1.1 | cdx6500SSEntryNumber | 0 | 0 | This identifies the particular Switched Service/LBU Table entry being configured. The number of instances defined by this entry d… |
1.3.6.1.4.1.449.2.1.2.2.14.1.2 | cdx6500SSDestinationName | 0 | 0 | This is a unique name that identifies this entry. |
1.3.6.1.4.1.449.2.1.2.2.14.1.3 | cdx6500SSCfgMonitoredPort | 0 | 0 | The X.25 port to be monitored for link failure. This is the port whose calls are rerouted in the event of port failure. The forma… |
1.3.6.1.4.1.449.2.1.2.2.14.1.4 | cdx6500SSCfgRestoralPort | 0 | 0 | This is the port or channel that acts as the backup when there is a port failure on the port specified by the parameter Monitored… |
1.3.6.1.4.1.449.2.1.2.2.14.1.6 | cdx6500SSActivationMode | 0 | 0 | This specifies how the switched service/backup port will be activated. fail - Activate the backup port upon link failure. call … |
1.3.6.1.4.1.449.2.1.2.2.14.1.7 | cdx6500SSDeactivationMode | 0 | 0 | This specifies how the switched service/backup port is deactivated after the original link is up. none - Backup port can only… |
1.3.6.1.4.1.449.2.1.2.2.14.1.8 | cdx6500SSLinkHoldTime | 0 | 0 | This replaces the value of the parameter Idle Disconnect Timer in the X.25 Port Record and specifies how long (in seconds) the ba… |
1.3.6.1.4.1.449.2.1.2.2.14.1.9 | cdx6500SSOutBoundPass | 0 | 0 | This is the password used by the remote station to determine if dial access is authorized. |
1.3.6.1.4.1.449.2.1.2.2.14.1.10 | cdx6500SSRedialTime | 0 | 0 | This is the time in seconds between dial attempts when bringing up a switched service call. |
1.3.6.1.4.1.449.2.1.2.2.14.1.11 | cdx6500SSRedialCounter | 0 | 0 | This parameter is used to specify the number of times that the Switched Service will attempt to redial when redial timer is expir… |
1.3.6.1.4.1.449.2.1.2.2.14.1.12 | cdx6500SSSecurityMode | 0 | 0 | This specifies under what conditions the port/channel authorizes call request. none - A call request not be rejected based … |
1.3.6.1.4.1.449.2.1.2.2.14.1.13 | cdx6500SSSetupTime | 0 | 0 | This is the time in seconds the monitor port(s) are given to come up after node boot before the backup port is activated. |
1.3.6.1.4.1.449.2.1.2.2.14.1.14 | cdx6500SSCfgMonitoredPort2 | 0 | 0 | The X.25 port to be monitored for link failure. This is the port whose calls are rerouted in the event of port failure. The forma… |
1.3.6.1.4.1.449.2.1.2.2.14.1.15 | cdx6500SSCfgMonitoredPort3 | 0 | 0 | The X.25 port to be monitored for link failure. This is the port whose calls are rerouted in the event of port failure. The forma… |
1.3.6.1.4.1.449.2.1.2.2.14.1.16 | cdx6500SSCfgMonitoredPort4 | 0 | 0 | The X.25 port to be monitored for link failure. This is the port whose calls are rerouted in the event of port failure. The forma… |
1.3.6.1.4.1.449.2.1.2.2.14.1.17 | cdx6500SSDialSequence2 | 0 | 0 | This specifies the telephone numbers that will be dialed when the backup port is activated. To enter your own telephone number, u… |
1.3.6.1.4.1.449.2.1.2.2.14.1.18 | cdx6500SSDialSequence3 | 0 | 0 | This specifies the telephone numbers that will be dialed when the backup port is activated. To enter your own telephone number, u… |
1.3.6.1.4.1.449.2.1.2.2.14.1.19 | cdx6500SSDialSequence4 | 0 | 0 | This specifies the telephone numbers that will be dialed when the backup port is activated. To enter your own telephone number, u… |