This specifies how the switched service/backup port is
deactivated after the original link is up.
none - Backup port can only be deactivated
by operator intervention.
busyOut - The backup port is deactivated after
all the calls on that port are cleared
for a predetermined amount of time.
This substitutes the value assigned
to the parameter Link Hold Time with
the value assigned to the parameter
Idle Disconnect Time in the X.25 Port
Record. The Idle Disconnect Time will
then work as described in the Operators
Guide.
When Deactivation Mode = BUSY OUT and
Link Hold Time = 0 (zero) the overall
effect is the same as setting this
entry to NONE.
imm - The backup link is terminated
IMMediately when the monitored port is
restored regardless of how many calls
are present.
newvalNone - same functionality as 'none', new enumeration
added for RFC1155 compatibility.
Parsed from file vanguard-65xx-ss.mib.txt
Company: None
Module: SS-OPT-MIB
This specifies how the switched service/backup port is
deactivated after the original link is up.
none - Backup port can only be deactivated
by operator intervention.
busyOut - The backup port is deactivated after
all the calls on that port are cleared
for a predetermined amount of time.
This substitutes the value assigned
to the parameter Link Hold Time with
the value assigned to the parameter
Idle Disconnect Time in the X.25 Port
Record. The Idle Disconnect Time will
then work as described in the Operators
Guide.
When Deactivation Mode = BUSY OUT and
Link Hold Time = 0 (zero) the overall
effect is the same as setting this
entry to NONE.
imm - The backup link is terminated
IMMediately when the monitored port is
restored regardless of how many calls
are present.
newvalNone - same functionality as 'none', new enumeration
added for RFC1155 compatibility.
Parsed from file SS-OPT-MIB.mib
Module: SS-OPT-MIB
Vendor: Codex
Module: SS-OPT-MIB
[Automatically extracted from oidview.com]
cdx6500SSDeactivationMode OBJECT-TYPE SYNTAX INTEGER { none (0), busyOut (1), imm (2), newvalNone (50) } ACCESS read-only STATUS mandatory DESCRIPTION "This specifies how the switched service/backup port is deactivated after the original link is up. none - Backup port can only be deactivated by operator intervention. busyOut - The backup port is deactivated after all the calls on that port are cleared for a predetermined amount of time. This substitutes the value assigned to the parameter Link Hold Time with the value assigned to the parameter Idle Disconnect Time in the X.25 Port Record. The Idle Disconnect Time will then work as described in the Operators Guide. When Deactivation Mode = BUSY OUT and Link Hold Time = 0 (zero) the overall effect is the same as setting this entry to NONE. imm - The backup link is terminated IMMediately when the monitored port is restored regardless of how many calls are present. newvalNone - same functionality as 'none', new enumeration added for RFC1155 compatibility." ::= { cdx6500SSCfgEntry 7 }
cdx6500SSDeactivationMode OBJECT-TYPE SYNTAX INTEGER { none (0), busyOut (1), imm (2), newvalNone (50) } ACCESS read-only STATUS mandatory DESCRIPTION "This specifies how the switched service/backup port is deactivated after the original link is up. none - Backup port can only be deactivated by operator intervention. busyOut - The backup port is deactivated after all the calls on that port are cleared for a predetermined amount of time. This substitutes the value assigned to the parameter Link Hold Time with the value assigned to the parameter Idle Disconnect Time in the X.25 Port Record. The Idle Disconnect Time will then work as described in the Operators Guide. When Deactivation Mode = BUSY OUT and Link Hold Time = 0 (zero) the overall effect is the same as setting this entry to NONE. imm - The backup link is terminated IMMediately when the monitored port is restored regardless of how many calls are present. newvalNone - same functionality as 'none', new enumeration added for RFC1155 compatibility." ::= { cdx6500SSCfgEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.449.2.1.2.2.14.1.1 | cdx6500SSEntryNumber | 0 | 0 | This identifies the particular Switched Service/LBU Table entry being configured. The number of instances defined by this entry d… |
| 1.3.6.1.4.1.449.2.1.2.2.14.1.2 | cdx6500SSDestinationName | 0 | 0 | This is a unique name that identifies this entry. |
| 1.3.6.1.4.1.449.2.1.2.2.14.1.3 | cdx6500SSCfgMonitoredPort | 0 | 0 | The X.25 port to be monitored for link failure. This is the port whose calls are rerouted in the event of port failure. The forma… |
| 1.3.6.1.4.1.449.2.1.2.2.14.1.4 | cdx6500SSCfgRestoralPort | 0 | 0 | This is the port or channel that acts as the backup when there is a port failure on the port specified by the parameter Monitored… |
| 1.3.6.1.4.1.449.2.1.2.2.14.1.5 | cdx6500SSDialSequence | 0 | 0 | This specifies the telephone numbers that will be dialed when the backup port is activated. To enter your own telephone number, u… |
| 1.3.6.1.4.1.449.2.1.2.2.14.1.6 | cdx6500SSActivationMode | 0 | 0 | This specifies how the switched service/backup port will be activated. fail - Activate the backup port upon link failure. call … |
| 1.3.6.1.4.1.449.2.1.2.2.14.1.8 | cdx6500SSLinkHoldTime | 0 | 0 | This replaces the value of the parameter Idle Disconnect Timer in the X.25 Port Record and specifies how long (in seconds) the ba… |
| 1.3.6.1.4.1.449.2.1.2.2.14.1.9 | cdx6500SSOutBoundPass | 0 | 0 | This is the password used by the remote station to determine if dial access is authorized. |
| 1.3.6.1.4.1.449.2.1.2.2.14.1.10 | cdx6500SSRedialTime | 0 | 0 | This is the time in seconds between dial attempts when bringing up a switched service call. |
| 1.3.6.1.4.1.449.2.1.2.2.14.1.11 | cdx6500SSRedialCounter | 0 | 0 | This parameter is used to specify the number of times that the Switched Service will attempt to redial when redial timer is expir… |
| 1.3.6.1.4.1.449.2.1.2.2.14.1.12 | cdx6500SSSecurityMode | 0 | 0 | This specifies under what conditions the port/channel authorizes call request. none - A call request not be rejected based … |
| 1.3.6.1.4.1.449.2.1.2.2.14.1.13 | cdx6500SSSetupTime | 0 | 0 | This is the time in seconds the monitor port(s) are given to come up after node boot before the backup port is activated. |
| 1.3.6.1.4.1.449.2.1.2.2.14.1.14 | cdx6500SSCfgMonitoredPort2 | 0 | 0 | The X.25 port to be monitored for link failure. This is the port whose calls are rerouted in the event of port failure. The forma… |
| 1.3.6.1.4.1.449.2.1.2.2.14.1.15 | cdx6500SSCfgMonitoredPort3 | 0 | 0 | The X.25 port to be monitored for link failure. This is the port whose calls are rerouted in the event of port failure. The forma… |
| 1.3.6.1.4.1.449.2.1.2.2.14.1.16 | cdx6500SSCfgMonitoredPort4 | 0 | 0 | The X.25 port to be monitored for link failure. This is the port whose calls are rerouted in the event of port failure. The forma… |
| 1.3.6.1.4.1.449.2.1.2.2.14.1.17 | cdx6500SSDialSequence2 | 0 | 0 | This specifies the telephone numbers that will be dialed when the backup port is activated. To enter your own telephone number, u… |
| 1.3.6.1.4.1.449.2.1.2.2.14.1.18 | cdx6500SSDialSequence3 | 0 | 0 | This specifies the telephone numbers that will be dialed when the backup port is activated. To enter your own telephone number, u… |
| 1.3.6.1.4.1.449.2.1.2.2.14.1.19 | cdx6500SSDialSequence4 | 0 | 0 | This specifies the telephone numbers that will be dialed when the backup port is activated. To enter your own telephone number, u… |