Status of the port. Setting wrap(2) disconnects
the port from the ring and setting this object to
connect(3) connects the port to the ring. If a
timed wrap is desired, then writing timedWrap(4)
to this object at the same time that a time value
is supplied in s3TrPortPartTime is required.
Timed wraps will not survive across a reset. In
this case the port will go to the wrap(2) state.
BeaconWrap(5) indicates that the port is temporary
wrapped by the agent due to the station of the
port which was beaconing. The wrapped port will
be unwrapped by the agent when the station is
deinserted from the ring. WrongSpeedWrap(6)
indicates that the port is wrapped by the host
module. This is due to the wrong speed of a new
station which was inserted to the ring.
PermBeaconWrap(7) indicates that the port is
wrapped by the agent permanently. This is caused
by the beaconing station of the port attempting
to deinsert/insert to the ring for more than
2 times within 1 minute. The wrapped port will
not be unwrapped by the agent. SecurityViolationWrap(8)
indicates that the port is wrapped by the agent due to
the station not being allowed to insert in the port.
The values beaconWrap(5), wrongSpeedWap(6),
permanentBeaconwrap(7) and securityViolationWrap(8)
can not be written.
Note: The securityViolationWrap feature is implemented
only in version 4.3 and subsequent agents.
Parsed from file s3tok430.mib.txt
Company: None
Module: SYNOPTICS-TOKENRING-MIB
Status of the port. Setting wrap(2) disconnects
the port from the ring and setting this object to
connect(3) connects the port to the ring. If a
timed wrap is desired, then writing timedWrap(4)
to this object at the same time that a time value
is supplied in s3TrPortPartTime is required.
Timed wraps will not survive across a reset. In
this case the port will go to the wrap(2) state.
BeaconWrap(5) indicates that the port is temporary
wrapped by the agent due to the station of the
port which was beaconing. The wrapped port will
be unwrapped by the agent when the station is
deinserted from the ring. WrongSpeedWrap(6)
indicates that the port is wrapped by the host
module. This is due to the wrong speed of a new
station which was inserted to the ring.
PermBeaconWrap(7) indicates that the port is
wrapped by the agent permanently. This is caused
by the beaconing station of the port attempting
to deinsert/insert to the ring for more than
2 times within 1 minute. The wrapped port will
not be unwrapped by the agent. SecurityViolationWrap(8)
indicates that the port is wrapped by the agent due to
the station not being allowed to insert in the port.
The values beaconWrap(5), wrongSpeedWap(6),
permanentBeaconwrap(7) and securityViolationWrap(8)
can not be written.
Note: The securityViolationWrap feature is implemented
only in version 4.3 and subsequent agents.
Parsed from file SYNOPTICS-BASIC-ETHTOK-MIB.mib
Module: SYNOPTICS-BASIC-ETHTOK-MIB
Vendor: Nortel Networks
Module: SYNOPTICS-TOKENRING-MIB (s3tok430.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
s3TrPortWrap OBJECT-TYPE SYNTAX INTEGER { other(1), wrap(2), connect(3), timedWrap(4), beaconWrap(5), wrongSpeedWrap(6), permBeaconWrap(7), securityViolationWrap(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Status of the port. Setting wrap(2) disconnects the port from the ring and setting this object to connect(3) connects the port to the ring. If a timed wrap is desired, then writing timedWrap(4) to this object at the same time that a time value is supplied in s3TrPortPartTime is required. Timed wraps will not survive across a reset. In this case the port will go to the wrap(2) state. BeaconWrap(5) indicates that the port is temporary wrapped by the agent due to the station of the port which was beaconing. The wrapped port will be unwrapped by the agent when the station is deinserted from the ring. WrongSpeedWrap(6) indicates that the port is wrapped by the host module. This is due to the wrong speed of a new station which was inserted to the ring. PermBeaconWrap(7) indicates that the port is wrapped by the agent permanently. This is caused by the beaconing station of the port attempting to deinsert/insert to the ring for more than 2 times within 1 minute. The wrapped port will not be unwrapped by the agent. SecurityViolationWrap(8) indicates that the port is wrapped by the agent due to the station not being allowed to insert in the port. The values beaconWrap(5), wrongSpeedWap(6), permanentBeaconwrap(7) and securityViolationWrap(8) can not be written. Note: The securityViolationWrap feature is implemented only in version 4.3 and subsequent agents." ::= { s3TrPortEntry 3 }
s3TrPortWrap OBJECT-TYPE SYNTAX INTEGER { other(1), wrap(2), connect(3), timedWrap(4), beaconWrap(5), wrongSpeedWrap(6), permBeaconWrap(7), securityViolationWrap(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Status of the port. Setting wrap(2) disconnects the port from the ring and setting this object to connect(3) connects the port to the ring. If a timed wrap is desired, then writing timedWrap(4) to this object at the same time that a time value is supplied in s3TrPortPartTime is required. Timed wraps will not survive across a reset. In this case the port will go to the wrap(2) state. BeaconWrap(5) indicates that the port is temporary wrapped by the agent due to the station of the port which was beaconing. The wrapped port will be unwrapped by the agent when the station is deinserted from the ring. WrongSpeedWrap(6) indicates that the port is wrapped by the host module. This is due to the wrong speed of a new station which was inserted to the ring. PermBeaconWrap(7) indicates that the port is wrapped by the agent permanently. This is caused by the beaconing station of the port attempting to deinsert/insert to the ring for more than 2 times within 1 minute. The wrapped port will not be unwrapped by the agent. SecurityViolationWrap(8) indicates that the port is wrapped by the agent due to the station not being allowed to insert in the port. The values beaconWrap(5), wrongSpeedWap(6), permanentBeaconwrap(7) and securityViolationWrap(8) can not be written. Note: The securityViolationWrap feature is implemented only in version 4.3 and subsequent agents." ::= { s3TrPortEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.1.3.3.3.1.1.1 | s3TrPortBoardIndex | 0 | 0 | A unique value for each board. Its value ranges between 1 and 12. The value for each board must remain constant at least from o… |
| 1.3.6.1.4.1.45.1.3.3.3.1.1.2 | s3TrPortIndex | 0 | 0 | A unique value for each port. Its value ranges between 1 and 12. The value for each port must remain constant at least from one… |
| 1.3.6.1.4.1.45.1.3.3.3.1.1.4 | s3TrPortTestLatch | 0 | 0 | Status of the test latch which is used to set the channel decoder used to monitor the health of the communication path between th… |
| 1.3.6.1.4.1.45.1.3.3.3.1.1.5 | s3TrPortRelayStatus | 0 | 0 | Status of the channel's present relay mode. On(2) means the channel is in the ring and off(3) means the channel is bypassed. |
| 1.3.6.1.4.1.45.1.3.3.3.1.1.6 | s3TrPortPhantomStatus | 0 | 0 | Status of the ring access request signal. |
| 1.3.6.1.4.1.45.1.3.3.3.1.1.7 | s3TrPortPhantomChangeFlag | 0 | 0 | Change(3) indicates that port phantom has been changed from OFF to ON. After inquiry by NMS, it will be cleared to noChange(2). … |
| 1.3.6.1.4.1.45.1.3.3.3.1.1.8 | s3TrPortChgSyn2IBM | 0 | 0 | If the port is on a ring in/ring out module this object changes the strap state depending on the jumper setting retrieved as s3Tr… |
| 1.3.6.1.4.1.45.1.3.3.3.1.1.9 | s3TrPortStrap | 0 | 0 | If the port is on a ring in/ring out module this object signifies whether the hardware jumper is in synoptics(2) mode or ibm(3) m… |
| 1.3.6.1.4.1.45.1.3.3.3.1.1.10 | s3TrPortLineErrs | 0 | 0 | Number of line errors. Section 3.8.1 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.3.3.3.1.1.11 | s3TrPortBurstErrs | 0 | 0 | Number of burst errors. Section 3.8.3 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.3.3.3.1.1.12 | s3TrPortAriFciErrs | 0 | 0 | Number of ARI FCI errors. See AC errors, Section 3.8.4 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.3.3.3.1.1.13 | s3TrPortLostFrames | 0 | 0 | Number of frames lost. Section 3.8.6 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.3.3.3.1.1.14 | s3TrPortRcvCongestErrs | 0 | 0 | Number of receive congestion errors. Section 3.8.7 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.3.3.3.1.1.15 | s3TrPortFrmCopyErrs | 0 | 0 | Number of frame copy errors. Section 3.8.8 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.3.3.3.1.1.16 | s3TrPortTokenErrs | 0 | 0 | Number of token errors. Section 3.8.10 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.3.3.3.1.1.17 | s3TrPortInternalErrs | 0 | 0 | Number of internal errors. Section 3.8.2 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.3.3.3.1.1.18 | s3TrPortAbortTransErrs | 0 | 0 | Number of abort delimiter transmitted errors. Section 3.8.5 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.3.3.3.1.1.19 | s3TrPortFrequencyErrs | 0 | 0 | Number of frequency errors. Section 3.8.9 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.3.3.3.1.1.20 | s3TrPortBeaconCnt | 0 | 0 | Number of beacon frames that have been seen. |
| 1.3.6.1.4.1.45.1.3.3.3.1.1.21 | s3TrPortPartTime | 0 | 0 | When wrapping the port for a specified time, s3TrPortWrap must be set with timedWrap(4) and this object must be supplied with the… |