Change(3) indicates that port phantom has been
changed from OFF to ON. After inquiry by NMS, it
will be cleared to noChange(2). Port phantom
changing from ON to OFF has no impact on this object.
Parsed from file s3tok430.mib.txt
Company: None
Module: SYNOPTICS-TOKENRING-MIB
Change(3) indicates that port phantom has been
changed from OFF to ON. After inquiry by NMS, it
will be cleared to noChange(2). Port phantom
changing from ON to OFF has no impact on this object.
Parsed from file SYNOPTICS-BASIC-ETHTOK-MIB.mib
Module: SYNOPTICS-BASIC-ETHTOK-MIB
Vendor: Nortel Networks
Module: SYNOPTICS-TOKENRING-MIB (s3tok430.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
s3TrPortPhantomChangeFlag OBJECT-TYPE SYNTAX INTEGER { other(1), noChange(2), change(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Change(3) indicates that port phantom has been changed from OFF to ON. After inquiry by NMS, it will be cleared to noChange(2). Port phantom changing from ON to OFF has no impact on this object." ::= { s3TrPortEntry 7 }
s3TrPortPhantomChangeFlag OBJECT-TYPE SYNTAX INTEGER { other(1), noChange(2), change(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Change(3) indicates that port phantom has been changed from OFF to ON. After inquiry by NMS, it will be cleared to noChange(2). Port phantom changing from ON to OFF has no impact on this object." ::= { s3TrPortEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.3.3.3.1.1.1 | s3TrPortBoardIndex | 0 | 0 | A unique value for each board. Its value ranges between 1 and 12. The value for each board must remain constant at least from o… |
1.3.6.1.4.1.45.1.3.3.3.1.1.2 | s3TrPortIndex | 0 | 0 | A unique value for each port. Its value ranges between 1 and 12. The value for each port must remain constant at least from one… |
1.3.6.1.4.1.45.1.3.3.3.1.1.3 | s3TrPortWrap | 0 | 0 | Status of the port. Setting wrap(2) disconnects the port from the ring and setting this object to connect(3) connects the port to… |
1.3.6.1.4.1.45.1.3.3.3.1.1.4 | s3TrPortTestLatch | 0 | 0 | Status of the test latch which is used to set the channel decoder used to monitor the health of the communication path between th… |
1.3.6.1.4.1.45.1.3.3.3.1.1.5 | s3TrPortRelayStatus | 0 | 0 | Status of the channel's present relay mode. On(2) means the channel is in the ring and off(3) means the channel is bypassed. |
1.3.6.1.4.1.45.1.3.3.3.1.1.6 | s3TrPortPhantomStatus | 0 | 0 | Status of the ring access request signal. |
1.3.6.1.4.1.45.1.3.3.3.1.1.8 | s3TrPortChgSyn2IBM | 0 | 0 | If the port is on a ring in/ring out module this object changes the strap state depending on the jumper setting retrieved as s3Tr… |
1.3.6.1.4.1.45.1.3.3.3.1.1.9 | s3TrPortStrap | 0 | 0 | If the port is on a ring in/ring out module this object signifies whether the hardware jumper is in synoptics(2) mode or ibm(3) m… |
1.3.6.1.4.1.45.1.3.3.3.1.1.10 | s3TrPortLineErrs | 0 | 0 | Number of line errors. Section 3.8.1 of IEEE 802.5 specification. |
1.3.6.1.4.1.45.1.3.3.3.1.1.11 | s3TrPortBurstErrs | 0 | 0 | Number of burst errors. Section 3.8.3 of IEEE 802.5 specification. |
1.3.6.1.4.1.45.1.3.3.3.1.1.12 | s3TrPortAriFciErrs | 0 | 0 | Number of ARI FCI errors. See AC errors, Section 3.8.4 of IEEE 802.5 specification. |
1.3.6.1.4.1.45.1.3.3.3.1.1.13 | s3TrPortLostFrames | 0 | 0 | Number of frames lost. Section 3.8.6 of IEEE 802.5 specification. |
1.3.6.1.4.1.45.1.3.3.3.1.1.14 | s3TrPortRcvCongestErrs | 0 | 0 | Number of receive congestion errors. Section 3.8.7 of IEEE 802.5 specification. |
1.3.6.1.4.1.45.1.3.3.3.1.1.15 | s3TrPortFrmCopyErrs | 0 | 0 | Number of frame copy errors. Section 3.8.8 of IEEE 802.5 specification. |
1.3.6.1.4.1.45.1.3.3.3.1.1.16 | s3TrPortTokenErrs | 0 | 0 | Number of token errors. Section 3.8.10 of IEEE 802.5 specification. |
1.3.6.1.4.1.45.1.3.3.3.1.1.17 | s3TrPortInternalErrs | 0 | 0 | Number of internal errors. Section 3.8.2 of IEEE 802.5 specification. |
1.3.6.1.4.1.45.1.3.3.3.1.1.18 | s3TrPortAbortTransErrs | 0 | 0 | Number of abort delimiter transmitted errors. Section 3.8.5 of IEEE 802.5 specification. |
1.3.6.1.4.1.45.1.3.3.3.1.1.19 | s3TrPortFrequencyErrs | 0 | 0 | Number of frequency errors. Section 3.8.9 of IEEE 802.5 specification. |
1.3.6.1.4.1.45.1.3.3.3.1.1.20 | s3TrPortBeaconCnt | 0 | 0 | Number of beacon frames that have been seen. |
1.3.6.1.4.1.45.1.3.3.3.1.1.21 | s3TrPortPartTime | 0 | 0 | When wrapping the port for a specified time, s3TrPortWrap must be set with timedWrap(4) and this object must be supplied with the… |