s3TrNmmTestPathtestTimer
View at oid-info.com
This is the timeout in units of 100 milliseconds
that the NMM will wait for a reply to an LLC test
frame caused by doing a SET to s3TrNmmTpStart with
value startTestSourceRoute(2) or
startTestTransparent(3). This timer applies to all
entries in table s3TrNmmTestPathTable.
Parsed from file s3tok430.mib.txt
Company: nortel
Module: SYNOPTICS-TOKENRING-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
s3TrNmmTestPathTestTimer OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This is the timeout in units of 100 milliseconds that the NMM will wait for a reply to an LLC test frame caused by doing a SET to s3TrNmmTpStart with value startTestSourceRoute(2) or startTestTransparent(3). This timer applies to all entries in table s3TrNmmTestPathTable." ::={s3000TrNmm 16}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.3.3.4.16.0 | s3TrNmmTestPathTestTimer | 0 | 0 | s3TrNmmTestPathtestTimer |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.3.3.4.1 | s3TrNmmFnNum | 1 | 1 | Defines the flat network number that this NMM is part of. |
1.3.6.1.4.1.45.1.3.3.4.2 | s3TrNmmRingNum | 1 | 1 | Defines the segment number that this NMM is connected to. |
1.3.6.1.4.1.45.1.3.3.4.3 | s3TrNmmSlotNum | 1 | 1 | Defines the slot number that this NMM is connected to. New NMS implementations should use the object s3AgentMySlotId defined in … |
1.3.6.1.4.1.45.1.3.3.4.4 | s3TrNmmFpuIdRev | 1 | 1 | The revision of the Front-end Frame Processing unit. 0=Rev. A, 1=Rev. B, etc. |
1.3.6.1.4.1.45.1.3.3.4.5 | s3TrNmmFpuStatus | 1 | 1 | The status of the Front-end Frame Processing Unit. |
1.3.6.1.4.1.45.1.3.3.4.6 | s3TrNmmDramSize | 1 | 1 | The highest address of the DRAM in the NMM memory map. The possible values are: other(1).........Unknown size k512(2)..........512… |
1.3.6.1.4.1.45.1.3.3.4.7 | s3TrNmmEepromSize | 1 | 1 | The size of the EEPROM in the NMM memory map. The possible values are: other(1)..........Unknown size size2kBytes(4)....2K by 8 siz… |
1.3.6.1.4.1.45.1.3.3.4.8 | s3TrNmmGrpAddrFrmsRxOk | 1 | 1 | Number of Group Address frames received without error by this NMM. Note: The NMM counts only Group Address frames that are addres… |
1.3.6.1.4.1.45.1.3.3.4.9 | s3TrNmmRing1or2 | 1 | 1 | Determines which ring the NMM is currently using on the concentrator backplane. |
1.3.6.1.4.1.45.1.3.3.4.10 | s3TrNmmRingSpeed | 1 | 1 | Token Ring speed. |
1.3.6.1.4.1.45.1.3.3.4.11 | s3TrNmmHexDisplay | 1 | 1 | 4 octet hex display string that is displayed on the NMM control panel. |
1.3.6.1.4.1.45.1.3.3.4.12 | s3TrNmmEpromSize | 1 | 1 | The size of the EPROM in the NMM memory map. |
1.3.6.1.4.1.45.1.3.3.4.13 | s3TrNmmOldTestPathTable | 1 | 5 | s3TrNmmOldTestPathtable |
1.3.6.1.4.1.45.1.3.3.4.14 | s3TrNmmAuthStatus | 1 | 1 | Turning this object on(2) means that any node that is heard on this ring which is not currently in the s3TrAuthNodesTable will ca… |
1.3.6.1.4.1.45.1.3.3.4.15 | s3TrNmmAuthAction | 1 | 1 | If s3TrNmmAuthStatus is on(2) and the condition described by that object happens, then the action specified by this object will t… |
1.3.6.1.4.1.45.1.3.3.4.17 | s3TrNmmTestPathAgeTimer | 1 | 1 | The amount of time in unit of 100 milliseconds that an entry remains in table s3TrNmmTestPathTable before it is automatically rem… |
1.3.6.1.4.1.45.1.3.3.4.18 | s3TrNmmTestPathTable | 1 | 7 | s3TrNmmTestPathtable |
1.3.6.1.4.1.45.1.3.3.4.19 | s3TrNmmBnRiRoUnWrapIntval | 1 | 1 | The time in seconds an NMM will wait before it checks the beaconing condition on a Ring In Ring Out port. |
1.3.6.1.4.1.45.1.3.3.4.20 | s3TrNmmBnWrapTimerThreshd | 1 | 1 | The time in seconds a station is allowed to beacon before it is permanently wrapped by the NMM. |
1.3.6.1.4.1.45.1.3.3.4.21 | s3TrNmmBnWrapRetryThreshd | 1 | 1 | The number of times a port is allowed to beacon before it is permanently wrapped by the NMM. |
1.3.6.1.4.1.45.1.3.3.4.22 | s3TrNmmBnRmvalCondition | 1 | 1 | The use of the auto beacon removal process. A value of off(3) disables the process, and a value of on(2) enables it. Normally, th… |
1.3.6.1.4.1.45.1.3.3.4.23 | s3TrNmmBnWrapTrapIntval | 1 | 1 | The time interval in seconds in between the consecutive auto beacon wrap traps. |