s3TrNmmTestPathtable
View at oid-info.com
A table is used to initiate a 'path test' between
the NMM and a station in the flatnet. To start a
path test a SET operation is attempted with the value
of the object s3TrNmmTpSttart set to
startTestSourceRoute(2) or startTestTransparent(3).
If s3TrNmmTpRoute is not supplied in the SET
request, then the test will check to see if any
path between the NMM and the station exists. If a
route is supplied, then only the specified route
between the two stations will be checked.
There can only be one test active between the
NMM and a particular station at any time.
After a test is completed the entry will live in
the table until it is aged out by the value of
s3NmmTestPathAgeTimer. The table size has an
implementation limit. It is determined by the agent.
NOTE: Performing a path test on a destination station
which does not recognize or reply to 802.2 Test Frames
will result in a 'test-failed'.
Parsed from file s3tok430.mib.txt
Company: nortel
Module: SYNOPTICS-TOKENRING-MIB
Vendor: Nortel Networks
Module: SYNOPTICS-TOKENRING-MIB (s3tok430.mib)
Type: TABLE
Access: not-accessible
Syntax: SEQUENCE OF
Automatically extracted from www.mibdepot.com
s3TrNmmTestPathTable OBJECT-TYPE SYNTAX SEQUENCE OF S3TrNmmTestPathEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table is used to initiate a 'path test' between the NMM and a station in the flatnet. To start a path test a SET operation is attempted with the value of the object s3TrNmmTpSttart set to startTestSourceRoute(2) or startTestTransparent(3). If s3TrNmmTpRoute is not supplied in the SET request, then the test will check to see if any path between the NMM and the station exists. If a route is supplied, then only the specified route between the two stations will be checked. There can only be one test active between the NMM and a particular station at any time. After a test is completed the entry will live in the table until it is aged out by the value of s3NmmTestPathAgeTimer. The table size has an implementation limit. It is determined by the agent. NOTE: Performing a path test on a destination station which does not recognize or reply to 802.2 Test Frames will result in a 'test-failed'." ::={s3000TrNmm 18}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.1.3.3.4.18.1 | s3TrNmmTestPathEntry | 6 | 6 | A row in the test path table. Entries are created and deleted with SNMP SET requests. Also, entries may be aged out of the table. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.1.3.3.4.1 | s3TrNmmFnNum | 1 | 1 | Defines the flat network number that this NMM is part of. |
| 1.3.6.1.4.1.45.1.3.3.4.2 | s3TrNmmRingNum | 1 | 1 | Defines the segment number that this NMM is connected to. |
| 1.3.6.1.4.1.45.1.3.3.4.3 | s3TrNmmSlotNum | 1 | 1 | Defines the slot number that this NMM is connected to. New NMS implementations should use the object s3AgentMySlotId defined in … |
| 1.3.6.1.4.1.45.1.3.3.4.4 | s3TrNmmFpuIdRev | 1 | 1 | The revision of the Front-end Frame Processing unit. 0=Rev. A, 1=Rev. B, etc. |
| 1.3.6.1.4.1.45.1.3.3.4.5 | s3TrNmmFpuStatus | 1 | 1 | The status of the Front-end Frame Processing Unit. |
| 1.3.6.1.4.1.45.1.3.3.4.6 | s3TrNmmDramSize | 1 | 1 | The highest address of the DRAM in the NMM memory map. The possible values are: other(1).........Unknown size k512(2)..........512… |
| 1.3.6.1.4.1.45.1.3.3.4.7 | s3TrNmmEepromSize | 1 | 1 | The size of the EEPROM in the NMM memory map. The possible values are: other(1)..........Unknown size size2kBytes(4)....2K by 8 siz… |
| 1.3.6.1.4.1.45.1.3.3.4.8 | s3TrNmmGrpAddrFrmsRxOk | 1 | 1 | Number of Group Address frames received without error by this NMM. Note: The NMM counts only Group Address frames that are addres… |
| 1.3.6.1.4.1.45.1.3.3.4.9 | s3TrNmmRing1or2 | 1 | 1 | Determines which ring the NMM is currently using on the concentrator backplane. |
| 1.3.6.1.4.1.45.1.3.3.4.10 | s3TrNmmRingSpeed | 1 | 1 | Token Ring speed. |
| 1.3.6.1.4.1.45.1.3.3.4.11 | s3TrNmmHexDisplay | 1 | 1 | 4 octet hex display string that is displayed on the NMM control panel. |
| 1.3.6.1.4.1.45.1.3.3.4.12 | s3TrNmmEpromSize | 1 | 1 | The size of the EPROM in the NMM memory map. |
| 1.3.6.1.4.1.45.1.3.3.4.13 | s3TrNmmOldTestPathTable | 1 | 5 | s3TrNmmOldTestPathtable |
| 1.3.6.1.4.1.45.1.3.3.4.14 | s3TrNmmAuthStatus | 1 | 1 | Turning this object on(2) means that any node that is heard on this ring which is not currently in the s3TrAuthNodesTable will ca… |
| 1.3.6.1.4.1.45.1.3.3.4.15 | s3TrNmmAuthAction | 1 | 1 | If s3TrNmmAuthStatus is on(2) and the condition described by that object happens, then the action specified by this object will t… |
| 1.3.6.1.4.1.45.1.3.3.4.16 | s3TrNmmTestPathTestTimer | 1 | 1 | s3TrNmmTestPathtestTimer |
| 1.3.6.1.4.1.45.1.3.3.4.17 | s3TrNmmTestPathAgeTimer | 1 | 1 | The amount of time in unit of 100 milliseconds that an entry remains in table s3TrNmmTestPathTable before it is automatically rem… |
| 1.3.6.1.4.1.45.1.3.3.4.19 | s3TrNmmBnRiRoUnWrapIntval | 1 | 1 | The time in seconds an NMM will wait before it checks the beaconing condition on a Ring In Ring Out port. |
| 1.3.6.1.4.1.45.1.3.3.4.20 | s3TrNmmBnWrapTimerThreshd | 1 | 1 | The time in seconds a station is allowed to beacon before it is permanently wrapped by the NMM. |
| 1.3.6.1.4.1.45.1.3.3.4.21 | s3TrNmmBnWrapRetryThreshd | 1 | 1 | The number of times a port is allowed to beacon before it is permanently wrapped by the NMM. |
| 1.3.6.1.4.1.45.1.3.3.4.22 | s3TrNmmBnRmvalCondition | 1 | 1 | The use of the auto beacon removal process. A value of off(3) disables the process, and a value of on(2) enables it. Normally, th… |
| 1.3.6.1.4.1.45.1.3.3.4.23 | s3TrNmmBnWrapTrapIntval | 1 | 1 | The time interval in seconds in between the consecutive auto beacon wrap traps. |