The encoded octet string that specifies the source
route path of a successful startTestSourceRoute. The
first octet represents the length in octets of the
route string. Each two octets that follow specify a
ring number
a hop. The encoding is 3 nibbles for the ring number,
and 1 nibble for bridge number. The maximum size of
this path represents 7 hops (14 Octets). To initiate
a test, write to this object with the appropriate
route. If the corresponding table entry s3TrNmmTpStart
is not set, the agent will set the s3TrNmmTpStart to
startTestSourceRoute(2) and start the test. If a
'Transparent path test' succeeds, then this object
will reflect if the station is on the local ring or
on a ring which is transparently bridged to the local
ring. If the NMM and the station are both on the same
ring the length octet will be zero. If the route passed
through transparent bridges, then length octet will be
set to 1.
Parsed from file s3tok430.mib.txt
Company: nortel
Module: SYNOPTICS-TOKENRING-MIB
Vendor: Nortel Networks
Module: SYNOPTICS-TOKENRING-MIB (s3tok430.mib)
Type: TABULAR
Access: read-write
Syntax: OCTET STRING
( SIZE (
0..15 ) )
Automatically extracted from www.mibdepot.com
s3TrNmmTpRoute OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "The encoded octet string that specifies the source route path of a successful startTestSourceRoute. The first octet represents the length in octets of the route string. Each two octets that follow specify a ring number a hop. The encoding is 3 nibbles for the ring number, and 1 nibble for bridge number. The maximum size of this path represents 7 hops (14 Octets). To initiate a test, write to this object with the appropriate route. If the corresponding table entry s3TrNmmTpStart is not set, the agent will set the s3TrNmmTpStart to startTestSourceRoute(2) and start the test. If a 'Transparent path test' succeeds, then this object will reflect if the station is on the local ring or on a ring which is transparently bridged to the local ring. If the NMM and the station are both on the same ring the length octet will be zero. If the route passed through transparent bridges, then length octet will be set to 1." ::={s3TrNmmTestPathEntry 4}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.3.3.4.18.1.1 | s3TrNmmTpAddrTo | 0 | 0 | The destination MAC address to be used for the testpath operation |
1.3.6.1.4.1.45.1.3.3.4.18.1.2 | s3TrNmmTpStart | 0 | 0 | To initiate a test, write to this object with the appropriate value. If a test between this station and the NMM has already been … |
1.3.6.1.4.1.45.1.3.3.4.18.1.3 | s3TrNmmTpStatus | 0 | 0 | The current status of the test. If the interval of time between the NMM's request and the station's response is less than s3TrNm… |
1.3.6.1.4.1.45.1.3.3.4.18.1.5 | s3TrNmmTpDuration | 0 | 0 | This specifies the round trip time of a successful test in units of 100 milliseconds. This object will be equal to the value of s… |
1.3.6.1.4.1.45.1.3.3.4.18.1.6 | s3TrNmmTpTimeStamp | 0 | 0 | This is the time stamp (i.e., sysUpTime) of the last time that the path test was run successfully. |