The IP address of the current default gateway
(router). (NOTE: this is an alias for the object
ipRouteNextHop in the row of the table
ipRouteTable which has object ipRouteDest with
a value of 0.0.0.0.)
If not used, then this object has the value
of 0.0.0.0.
Parsed from file s5age120.mib.txt
Company: None
Module: S5-AGENT-MIB
The IP address of the current default gateway
(router). (NOTE: this is an alias for the object
ipRouteNextHop in the row of the table
ipRouteTable which has object ipRouteDest with
a value of 0.0.0.0.)
If not used, then this object has the value
of 0.0.0.0.
Parsed from file S5-AGENT-MIB.mib
Module: S5-AGENT-MIB
Vendor: SynOptics
Module: S5-AGENT-MIB
[Automatically extracted from oidview.com]
s5AgInfoCurDfltGwAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the current default gateway (router). (NOTE: this is an alias for the object ipRouteNextHop in the row of the table ipRouteTable which has object ipRouteDest with a value of 0.0.0.0.) If not used, then this object has the value of 0.0.0.0." ::= { s5AgentGbl 13 }
s5AgInfoCurDfltGwAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the current default gateway (router). (NOTE: this is an alias for the object ipRouteNextHop in the row of the table ipRouteTable which has object ipRouteDest with a value of 0.0.0.0.) If not used, then this object has the value of 0.0.0.0." ::= { s5AgentGbl 13 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.6.4.2.1.13.0 | s5AgInfoCurDfltGwAddr | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.6.4.2.1.1 | s5AgInfoReBoot | 1 | 1 | Action object to reboot the agent. The following values can only be read: other(1).....agent in unknown or other state running(2).… |
1.3.6.1.4.1.45.1.6.4.2.1.2 | s5AgInfoWriteCfg | 1 | 1 | Action object to cause current configuration settings to be written to local nonvolatile storage. The following values can only b… |
1.3.6.1.4.1.45.1.6.4.2.1.3 | s5AgInfoMgmtProtocolNxtBoot | 1 | 1 | The transport protocol(s) to use after the next boot of the agent. The following value is read-only: other(1)....unknown or some o… |
1.3.6.1.4.1.45.1.6.4.2.1.4 | s5AgInfoMgmtProtocolCur | 1 | 1 | The current transport protocol(s) that are being supported by the agent. The following value is read-only: other(1)....unknown or … |
1.3.6.1.4.1.45.1.6.4.2.1.5 | s5AgInfoBootMode | 1 | 1 | The source for initial protocol configuration information at next boot. For IP, a setting of net(3) means that BOOTP will be used… |
1.3.6.1.4.1.45.1.6.4.2.1.6 | s5AgInfoCfgLoadMode | 1 | 1 | The source from which to load configuration information at next boot. The following value is read-only: other(1)...not applicable … |
1.3.6.1.4.1.45.1.6.4.2.1.7 | s5AgInfoImgLoadMode | 1 | 1 | The source from which to load the agent image at next boot. The following value is read-only: other(1)...not applicable or some o… |
1.3.6.1.4.1.45.1.6.4.2.1.8 | s5AgInfoImgSaveMode | 1 | 1 | Indicates what to do with the image (when loaded from the network) on the next boot. The following value can only be read: notAvai… |
1.3.6.1.4.1.45.1.6.4.2.1.9 | s5AgInfoImgSaveStatus | 1 | 1 | Indicates what happened to the image file on the last boot. The following values are returned: notAvail(1).....the save operation … |
1.3.6.1.4.1.45.1.6.4.2.1.10 | s5AgInfoVer | 1 | 1 | The version of the agent in the form 'major.minor.maintenance[letters]'. This is an alias for the value of the object s5ChasStoreC… |
1.3.6.1.4.1.45.1.6.4.2.1.11 | s5AgInfoLocStorVer | 1 | 1 | The version of the agent image saved in local storage such as flash memory in the form 'major.minor.maintenance[letters]'. If not… |
1.3.6.1.4.1.45.1.6.4.2.1.12 | s5AgInfoNxtBootDfltGwAddr | 1 | 1 | The IP address of the default gateway (router) for the agent to use after the next boot. (NOTE: the current default router is the… |
1.3.6.1.4.1.45.1.6.4.2.1.14 | s5AgInfoDramUsage | 1 | 1 | An indication of the percentage of DRAM currently in use by this agent. If this information is not available the agent shall ret… |
1.3.6.1.4.1.45.1.6.4.2.1.15 | s5AgInfoLoadProtocolNxtBoot | 1 | 1 | The transport protocol(s) over which the agent is to use to load the configuration information and the agent image at the next boo… |
1.3.6.1.4.1.45.1.6.4.2.1.16 | s5AgInfoLoadProtocolLast | 1 | 1 | The transport protocol over which the agent image and configuration information were last loaded. The following values are read-… |
1.3.6.1.4.1.45.1.6.4.2.1.17 | s5AgInfoSlotScope | 1 | 1 | This object contains information about all the slots an agent can manage. The value is encoded in an octet string. One byte has … |
1.3.6.1.4.1.45.1.6.4.2.1.18 | s5AgInfoImgType | 1 | 1 | Indicates the type of agent image. This object is meant to distinguish between agents having the same version number running on t… |
1.3.6.1.4.1.45.1.6.4.2.1.19 | s5AgInfoScheduleBootTime | 1 | 1 | The time, measured in minutes, remaining until the action(s) set by s5AgInfoReBoot will be performed. This value must be set in t… |
1.3.6.1.4.1.45.1.6.4.2.1.20 | s5AgInfoScheduleBootCancel | 1 | 1 | Cancel a scheduled s5AgInfoReboot action. The following value is read-only: other(1)...not applicable or some other case This is a… |
1.3.6.1.4.1.45.1.6.4.2.1.21 | s5AgInfoNumBootBanks | 1 | 1 | The number of local storage locations (or flash memory banks) available on this device for operational code images. Devices witho… |
1.3.6.1.4.1.45.1.6.4.2.1.22 | s5AgInfoNextBootBank | 1 | 1 | The source of the image to be loaded upon the next boot of the device. If a value is set larger than s5AgInfoNumBootBanks, a bad… |
1.3.6.1.4.1.45.1.6.4.2.1.23 | s5AgInfoDstLoadBank | 1 | 1 | The local storage bank where the next system image image is downloaded to. Devices without local image capability or not supporti… |
1.3.6.1.4.1.45.1.6.4.2.1.24 | s5AgInfoFileAction | 1 | 1 | This object is used to download or upload a config file or an image file. In read operation, if no action taken since the boot up… |
1.3.6.1.4.1.45.1.6.4.2.1.25 | s5AgInfoFileStatus | 1 | 1 | This object is used to get the status of the latest action as shown by s5AgInfoFileAction. The values that can be read are: othe… |
1.3.6.1.4.1.45.1.6.4.2.1.26 | s5AgInfoStackBootpMACUsage | 1 | 1 | This object is used to get/set which MAC address is used by a stackable system when performing BOOTP requests during bootup. A v… |