Indicates what to do with the image (when
loaded from the network) on the next boot.
The following value can only be read:
notAvail(1)...the save operation is not
available
The following values can be written (and
read) if the device supports this capability:
writeIfDiff(2)....save image to local storage
at next boot if image is
different from saved contents
writeIfNewer(3)...save image to local storage
at next boot if image is
newer than saved contents.
noWrite(4)........do not save image to local
storage at next boot, even if
image is newer or different.
Parsed from file s5age120.mib.txt
Company: None
Module: S5-AGENT-MIB
Indicates what to do with the image (when
loaded from the network) on the next boot.
The following value can only be read:
notAvail(1)...the save operation is not
available
The following values can be written (and
read) if the device supports this capability:
writeIfDiff(2)....save image to local storage
at next boot if image is
different from saved contents
writeIfNewer(3)...save image to local storage
at next boot if image is
newer than saved contents.
noWrite(4)........do not save image to local
storage at next boot, even if
image is newer or different.
Parsed from file S5-AGENT-MIB.mib
Module: S5-AGENT-MIB
Vendor: SynOptics
Module: S5-AGENT-MIB
[Automatically extracted from oidview.com]
s5AgInfoImgSaveMode OBJECT-TYPE SYNTAX INTEGER { notAvail(1), writeIfDiff(2), writeIfNewer(3), noWrite(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates what to do with the image (when loaded from the network) on the next boot. The following value can only be read: notAvail(1)...the save operation is not available The following values can be written (and read) if the device supports this capability: writeIfDiff(2)....save image to local storage at next boot if image is different from saved contents writeIfNewer(3)...save image to local storage at next boot if image is newer than saved contents. noWrite(4)........do not save image to local storage at next boot, even if image is newer or different." ::= { s5AgentGbl 8 }
s5AgInfoImgSaveMode OBJECT-TYPE SYNTAX INTEGER { notAvail(1), writeIfDiff(2), writeIfNewer(3), noWrite(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates what to do with the image (when loaded from the network) on the next boot. The following value can only be read: notAvail(1)...the save operation is not available The following values can be written (and read) if the device supports this capability: writeIfDiff(2)....save image to local storage at next boot if image is different from saved contents writeIfNewer(3)...save image to local storage at next boot if image is newer than saved contents. noWrite(4)........do not save image to local storage at next boot, even if image is newer or different." ::= { s5AgentGbl 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.1.6.4.2.1.8.0 | s5AgInfoImgSaveMode | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.1.6.4.2.1.1 | s5AgInfoReBoot | 1 | 1 | Action object to reboot the agent. The following values can only be read: other(1).....agent in unknown or other state running(2).… |
| 1.3.6.1.4.1.45.1.6.4.2.1.2 | s5AgInfoWriteCfg | 1 | 1 | Action object to cause current configuration settings to be written to local nonvolatile storage. The following values can only b… |
| 1.3.6.1.4.1.45.1.6.4.2.1.3 | s5AgInfoMgmtProtocolNxtBoot | 1 | 1 | The transport protocol(s) to use after the next boot of the agent. The following value is read-only: other(1)....unknown or some o… |
| 1.3.6.1.4.1.45.1.6.4.2.1.4 | s5AgInfoMgmtProtocolCur | 1 | 1 | The current transport protocol(s) that are being supported by the agent. The following value is read-only: other(1)....unknown or … |
| 1.3.6.1.4.1.45.1.6.4.2.1.5 | s5AgInfoBootMode | 1 | 1 | The source for initial protocol configuration information at next boot. For IP, a setting of net(3) means that BOOTP will be used… |
| 1.3.6.1.4.1.45.1.6.4.2.1.6 | s5AgInfoCfgLoadMode | 1 | 1 | The source from which to load configuration information at next boot. The following value is read-only: other(1)...not applicable … |
| 1.3.6.1.4.1.45.1.6.4.2.1.7 | s5AgInfoImgLoadMode | 1 | 1 | The source from which to load the agent image at next boot. The following value is read-only: other(1)...not applicable or some o… |
| 1.3.6.1.4.1.45.1.6.4.2.1.9 | s5AgInfoImgSaveStatus | 1 | 1 | Indicates what happened to the image file on the last boot. The following values are returned: notAvail(1).....the save operation … |
| 1.3.6.1.4.1.45.1.6.4.2.1.10 | s5AgInfoVer | 1 | 1 | The version of the agent in the form 'major.minor.maintenance[letters]'. This is an alias for the value of the object s5ChasStoreC… |
| 1.3.6.1.4.1.45.1.6.4.2.1.11 | s5AgInfoLocStorVer | 1 | 1 | The version of the agent image saved in local storage such as flash memory in the form 'major.minor.maintenance[letters]'. If not… |
| 1.3.6.1.4.1.45.1.6.4.2.1.12 | s5AgInfoNxtBootDfltGwAddr | 1 | 1 | The IP address of the default gateway (router) for the agent to use after the next boot. (NOTE: the current default router is the… |
| 1.3.6.1.4.1.45.1.6.4.2.1.13 | s5AgInfoCurDfltGwAddr | 1 | 1 | The IP address of the current default gateway (router). (NOTE: this is an alias for the object ipRouteNextHop in the row of the t… |
| 1.3.6.1.4.1.45.1.6.4.2.1.14 | s5AgInfoDramUsage | 1 | 1 | An indication of the percentage of DRAM currently in use by this agent. If this information is not available the agent shall ret… |
| 1.3.6.1.4.1.45.1.6.4.2.1.15 | s5AgInfoLoadProtocolNxtBoot | 1 | 1 | The transport protocol(s) over which the agent is to use to load the configuration information and the agent image at the next boo… |
| 1.3.6.1.4.1.45.1.6.4.2.1.16 | s5AgInfoLoadProtocolLast | 1 | 1 | The transport protocol over which the agent image and configuration information were last loaded. The following values are read-… |
| 1.3.6.1.4.1.45.1.6.4.2.1.17 | s5AgInfoSlotScope | 1 | 1 | This object contains information about all the slots an agent can manage. The value is encoded in an octet string. One byte has … |
| 1.3.6.1.4.1.45.1.6.4.2.1.18 | s5AgInfoImgType | 1 | 1 | Indicates the type of agent image. This object is meant to distinguish between agents having the same version number running on t… |
| 1.3.6.1.4.1.45.1.6.4.2.1.19 | s5AgInfoScheduleBootTime | 1 | 1 | The time, measured in minutes, remaining until the action(s) set by s5AgInfoReBoot will be performed. This value must be set in t… |
| 1.3.6.1.4.1.45.1.6.4.2.1.20 | s5AgInfoScheduleBootCancel | 1 | 1 | Cancel a scheduled s5AgInfoReboot action. The following value is read-only: other(1)...not applicable or some other case This is a… |
| 1.3.6.1.4.1.45.1.6.4.2.1.21 | s5AgInfoNumBootBanks | 1 | 1 | The number of local storage locations (or flash memory banks) available on this device for operational code images. Devices witho… |
| 1.3.6.1.4.1.45.1.6.4.2.1.22 | s5AgInfoNextBootBank | 1 | 1 | The source of the image to be loaded upon the next boot of the device. If a value is set larger than s5AgInfoNumBootBanks, a bad… |
| 1.3.6.1.4.1.45.1.6.4.2.1.23 | s5AgInfoDstLoadBank | 1 | 1 | The local storage bank where the next system image image is downloaded to. Devices without local image capability or not supporti… |
| 1.3.6.1.4.1.45.1.6.4.2.1.24 | s5AgInfoFileAction | 1 | 1 | This object is used to download or upload a config file or an image file. In read operation, if no action taken since the boot up… |
| 1.3.6.1.4.1.45.1.6.4.2.1.25 | s5AgInfoFileStatus | 1 | 1 | This object is used to get the status of the latest action as shown by s5AgInfoFileAction. The values that can be read are: othe… |
| 1.3.6.1.4.1.45.1.6.4.2.1.26 | s5AgInfoStackBootpMACUsage | 1 | 1 | This object is used to get/set which MAC address is used by a stackable system when performing BOOTP requests during bootup. A v… |