The source from which to load the agent image
at next boot. The following value is read-only:
other(1)...not applicable or some other case
The following values are read-write:
local(2)........get from local storage
net(3)..........load from the network
locAsBk(4)......try using network and if it fails
then use local information.
netIfNewer(5)...try loading image over the net.
If can load image, and it is newer
than the local image, then use it.
Otherwise, use local image.
NOTE: only local(2) may be specified if
the IP stack is not enabled.
If the local image is not valid, the setting will
be net(3) and cannot be changed to local(2),
or locAsBk(4) until a valid image file is loaded
(i.e., error 'badValue' will be returned on SETS with
value other than net(3)). When the local image is
not valid and the network download of the image fails,
the entire boot process will be repeated.
When local(2) is specified, the image will be loaded
from local storage.
When net(3) is specified, the image will be downloaded
from the network only. The image file will never be
loaded from local storage, even if downloading fails
and the local image exists.
When locAsBk(4) is specified, a download of the image
will be tried over the network. If the network
download fails then the image is loaded from local
storage.
When netIfNewer(5) is specified, a download of the
image will be tried over the network. If successful,
it will then be compared to the image stored in local
storage. The most recent version of the two will be
used. If the local image is not valid, the network
will always be used. If the network download fails
then the image is loaded from the local storage.
Parsed from file s5age120.mib.txt
Company: None
Module: S5-AGENT-MIB
The source from which to load the agent image
at next boot. The following value is read-only:
other(1)...not applicable or some other case
The following values are read-write:
local(2)........get from local storage
net(3)..........load from the network
locAsBk(4)......try using network and if it fails
then use local information.
netIfNewer(5)...try loading image over the net.
If can load image, and it is newer
than the local image, then use it.
Otherwise, use local image.
If the local image is not valid, the setting will
be net(3) and cannot be changed to local(2),
or locAsBk(4) until a valid image file is loaded
(i.e., error 'badValue' will be returned on SETS with
value other than net(3)). When the local image is
not valid and the network download of the image fails,
the entire boot process will be repeated.
When local(2) is specified, the image will be loaded
from local storage.
When net(3) is specified, the image will be downloaded
from the network only. The image file will never be
loaded from local storage, even if downloading fails
and the local image exists.
When locAsBk(4) is specified, a download of the image
will be tried over the network. If the network
download fails then the image is loaded from local
storage.
When netIfNewer(5) is specified, a download of the
image will be tried over the network. If successful,
it will then be compared to the image stored in local
storage. The most recent version of the two will be
used. If the local image is not valid, the network
will always be used. If the network download fails
then the image is loaded from the local storage.
Parsed from file S5-AGENT-MIB.mib
Module: S5-AGENT-MIB
Vendor: SynOptics
Module: S5-AGENT-MIB
[Automatically extracted from oidview.com]
s5AgInfoImgLoadMode OBJECT-TYPE SYNTAX INTEGER { other(1), local(2), net(3), locAsBk(4), netIfNewer(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The source from which to load the agent image at next boot. The following value is read-only: other(1)...not applicable or some other case The following values are read-write: local(2)........get from local storage net(3)..........load from the network locAsBk(4)......try using network and if it fails then use local information. netIfNewer(5)...try loading image over the net. If can load image, and it is newer than the local image, then use it. Otherwise, use local image. NOTE: only local(2) may be specified if the IP stack is not enabled. If the local image is not valid, the setting will be net(3) and cannot be changed to local(2), or locAsBk(4) until a valid image file is loaded (i.e., error 'badValue' will be returned on SETS with value other than net(3)). When the local image is not valid and the network download of the image fails, the entire boot process will be repeated. When local(2) is specified, the image will be loaded from local storage. When net(3) is specified, the image will be downloaded from the network only. The image file will never be loaded from local storage, even if downloading fails and the local image exists. When locAsBk(4) is specified, a download of the image will be tried over the network. If the network download fails then the image is loaded from local storage. When netIfNewer(5) is specified, a download of the image will be tried over the network. If successful, it will then be compared to the image stored in local storage. The most recent version of the two will be used. If the local image is not valid, the network will always be used. If the network download fails then the image is loaded from the local storage." ::= { s5AgentGbl 7 }
s5AgInfoImgLoadMode OBJECT-TYPE SYNTAX INTEGER { other(1), local(2), net(3), locAsBk(4), netIfNewer(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The source from which to load the agent image at next boot. The following value is read-only: other(1)...not applicable or some other case The following values are read-write: local(2)........get from local storage net(3)..........load from the network locAsBk(4)......try using network and if it fails then use local information. netIfNewer(5)...try loading image over the net. If can load image, and it is newer than the local image, then use it. Otherwise, use local image. If the local image is not valid, the setting will be net(3) and cannot be changed to local(2), or locAsBk(4) until a valid image file is loaded (i.e., error 'badValue' will be returned on SETS with value other than net(3)). When the local image is not valid and the network download of the image fails, the entire boot process will be repeated. When local(2) is specified, the image will be loaded from local storage. When net(3) is specified, the image will be downloaded from the network only. The image file will never be loaded from local storage, even if downloading fails and the local image exists. When locAsBk(4) is specified, a download of the image will be tried over the network. If the network download fails then the image is loaded from local storage. When netIfNewer(5) is specified, a download of the image will be tried over the network. If successful, it will then be compared to the image stored in local storage. The most recent version of the two will be used. If the local image is not valid, the network will always be used. If the network download fails then the image is loaded from the local storage." ::= { s5AgentGbl 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.6.4.2.1.7.0 | s5AgInfoImgLoadMode | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.6.4.2.1.1 | s5AgInfoReBoot | 1 | 1 | Action object to reboot the agent. The following values can only be read: other(1).....agent in unknown or other state running(2).… |
1.3.6.1.4.1.45.1.6.4.2.1.2 | s5AgInfoWriteCfg | 1 | 1 | Action object to cause current configuration settings to be written to local nonvolatile storage. The following values can only b… |
1.3.6.1.4.1.45.1.6.4.2.1.3 | s5AgInfoMgmtProtocolNxtBoot | 1 | 1 | The transport protocol(s) to use after the next boot of the agent. The following value is read-only: other(1)....unknown or some o… |
1.3.6.1.4.1.45.1.6.4.2.1.4 | s5AgInfoMgmtProtocolCur | 1 | 1 | The current transport protocol(s) that are being supported by the agent. The following value is read-only: other(1)....unknown or … |
1.3.6.1.4.1.45.1.6.4.2.1.5 | s5AgInfoBootMode | 1 | 1 | The source for initial protocol configuration information at next boot. For IP, a setting of net(3) means that BOOTP will be used… |
1.3.6.1.4.1.45.1.6.4.2.1.6 | s5AgInfoCfgLoadMode | 1 | 1 | The source from which to load configuration information at next boot. The following value is read-only: other(1)...not applicable … |
1.3.6.1.4.1.45.1.6.4.2.1.8 | s5AgInfoImgSaveMode | 1 | 1 | Indicates what to do with the image (when loaded from the network) on the next boot. The following value can only be read: notAvai… |
1.3.6.1.4.1.45.1.6.4.2.1.9 | s5AgInfoImgSaveStatus | 1 | 1 | Indicates what happened to the image file on the last boot. The following values are returned: notAvail(1).....the save operation … |
1.3.6.1.4.1.45.1.6.4.2.1.10 | s5AgInfoVer | 1 | 1 | The version of the agent in the form 'major.minor.maintenance[letters]'. This is an alias for the value of the object s5ChasStoreC… |
1.3.6.1.4.1.45.1.6.4.2.1.11 | s5AgInfoLocStorVer | 1 | 1 | The version of the agent image saved in local storage such as flash memory in the form 'major.minor.maintenance[letters]'. If not… |
1.3.6.1.4.1.45.1.6.4.2.1.12 | s5AgInfoNxtBootDfltGwAddr | 1 | 1 | The IP address of the default gateway (router) for the agent to use after the next boot. (NOTE: the current default router is the… |
1.3.6.1.4.1.45.1.6.4.2.1.13 | s5AgInfoCurDfltGwAddr | 1 | 1 | The IP address of the current default gateway (router). (NOTE: this is an alias for the object ipRouteNextHop in the row of the t… |
1.3.6.1.4.1.45.1.6.4.2.1.14 | s5AgInfoDramUsage | 1 | 1 | An indication of the percentage of DRAM currently in use by this agent. If this information is not available the agent shall ret… |
1.3.6.1.4.1.45.1.6.4.2.1.15 | s5AgInfoLoadProtocolNxtBoot | 1 | 1 | The transport protocol(s) over which the agent is to use to load the configuration information and the agent image at the next boo… |
1.3.6.1.4.1.45.1.6.4.2.1.16 | s5AgInfoLoadProtocolLast | 1 | 1 | The transport protocol over which the agent image and configuration information were last loaded. The following values are read-… |
1.3.6.1.4.1.45.1.6.4.2.1.17 | s5AgInfoSlotScope | 1 | 1 | This object contains information about all the slots an agent can manage. The value is encoded in an octet string. One byte has … |
1.3.6.1.4.1.45.1.6.4.2.1.18 | s5AgInfoImgType | 1 | 1 | Indicates the type of agent image. This object is meant to distinguish between agents having the same version number running on t… |
1.3.6.1.4.1.45.1.6.4.2.1.19 | s5AgInfoScheduleBootTime | 1 | 1 | The time, measured in minutes, remaining until the action(s) set by s5AgInfoReBoot will be performed. This value must be set in t… |
1.3.6.1.4.1.45.1.6.4.2.1.20 | s5AgInfoScheduleBootCancel | 1 | 1 | Cancel a scheduled s5AgInfoReboot action. The following value is read-only: other(1)...not applicable or some other case This is a… |
1.3.6.1.4.1.45.1.6.4.2.1.21 | s5AgInfoNumBootBanks | 1 | 1 | The number of local storage locations (or flash memory banks) available on this device for operational code images. Devices witho… |
1.3.6.1.4.1.45.1.6.4.2.1.22 | s5AgInfoNextBootBank | 1 | 1 | The source of the image to be loaded upon the next boot of the device. If a value is set larger than s5AgInfoNumBootBanks, a bad… |
1.3.6.1.4.1.45.1.6.4.2.1.23 | s5AgInfoDstLoadBank | 1 | 1 | The local storage bank where the next system image image is downloaded to. Devices without local image capability or not supporti… |
1.3.6.1.4.1.45.1.6.4.2.1.24 | s5AgInfoFileAction | 1 | 1 | This object is used to download or upload a config file or an image file. In read operation, if no action taken since the boot up… |
1.3.6.1.4.1.45.1.6.4.2.1.25 | s5AgInfoFileStatus | 1 | 1 | This object is used to get the status of the latest action as shown by s5AgInfoFileAction. The values that can be read are: othe… |
1.3.6.1.4.1.45.1.6.4.2.1.26 | s5AgInfoStackBootpMACUsage | 1 | 1 | This object is used to get/set which MAC address is used by a stackable system when performing BOOTP requests during bootup. A v… |