Action object to download a new image to the agent. The following
values can be read :
other (1) ..... agent in unknown state
running (2) ...agent running after download
The following values ca be written :
download (3) ... re-download a new image.
The image filename is defined in lsDCMImgFname and the image
load mode is set in lsDCMInfoImgLoadMode.
This is a temporary attribute to allow Agent Image dowload for a
DCM probe in the DDS switch. It is implemented by the DDS agent only.
It does not affect 28k, 58k or other Baynetworks LAN Switch agents.
This attribute will be substituted by the new xprobe mib in the future. If x10 does not exist, the value has no meaning.The design assume
there is at most one x10 per DDS switch.
Parsed from file lsdcm100.mib.txt
Company: nortel
Module: SYNOPTICS-LS-DCM-MIB
lsDCMImgDownload OBJECT-TYPE SYNTAX INTEGER { other (1), running (2), download (3) } ACCESS read-write STATUS mandatory DESCRIPTION "Action object to download a new image to the agent. The following values can be read : other (1) ..... agent in unknown state running (2) ...agent running after download The following values ca be written : download (3) ... re-download a new image. The image filename is defined in lsDCMImgFname and the image load mode is set in lsDCMInfoImgLoadMode. This is a temporary attribute to allow Agent Image dowload for a DCM probe in the DDS switch. It is implemented by the DDS agent only. It does not affect 28k, 58k or other Baynetworks LAN Switch agents. This attribute will be substituted by the new xprobe mib in the future. If x10 does not exist, the value has no meaning.The design assume there is at most one x10 per DDS switch." ::= { lsDCMSupport 2}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.7.7.1 | lsDCMAttPoint | 0 | 0 | This attribute allows roving of a x10 probe in DDS switch. It is implemented by the DDS agent only. It does not affect 28k, 58k … |
1.3.6.1.4.1.45.1.7.7.3 | lsDCMInfoImgLoadMode | 0 | 0 | The source from which to load the agent image at next boot. The following value is read-only: other(1)...not applicable or some o… |
1.3.6.1.4.1.45.1.7.7.4 | lsDCMImgFname | 0 | 0 | Name of the image file currently associated with the DCM. When the object is not used, the value is a zero length string. |
1.3.6.1.4.1.45.1.7.7.5 | lsDCMInfoImgSaveMode | 0 | 0 | Indicates what to do with the image (when loaded from the network) on the next boot. The following value can only be read: notAvai… |
1.3.6.1.4.1.45.1.7.7.6 | lsSubAgInfoWriteCfg | 0 | 0 | Action object to cause current configuration settings to be written to local nonvolatile storage. The following values can only b… |