The source from which to load the agent image at next boot. The
following value is read-only:
other(1)...not applicable or some other case
The following values are read-write:
local(2)........get from local storage
net(3)..........load from the network
locAsBk(4)......try using network and if it fails then use
local information.
netIfNewer(5)...try loading image over the net. If can load
image, and it is newer than the local image,
then use it. Otherwise, use local image.
If the local image is not valid, the setting will be net(3) and cannot be changed to local(2), or locAsBk(4) until a valid image file is
loaded (i.e., error 'badValue' will be returned on SETS with value
other than net(3)). When the local image is not valid and the network download of the image fails, the entire boot process will be repeated.
When local(2) is specified, the image will be loaded from local
storage.
When net(3) is specified, the image will be downloaded from the network
only. The image file will never be loaded from local storage, even if
downloading fails and the local image exists.
When locAsBk(4) is specified, a download of the image will be tried
over the network. If the network download fails then the image is
loaded from local storage.
When netIfNewer(5) is specified, a download of the image will be tried
over the network. If successful, it will then be compared to the image
stored in local storage. The most recent version of the two will be
used. If the local image is not valid, the network will always be used. If the network download fails then the image is loaded from the local
storage.
This is a temporary attribute to allow Agent Image dowload for a
DCM probe in the DDS switch. It is implemented by the DDS agent only.
It does not affect 28k, 58k or other Baynetworks LAN Switch agents.
This attribute will be substituted by the new xprobe mib in the future. If x10 does not exist, the value has no meaning.The design assume there is at most one x10 per DDS switch.
Parsed from file lsdcm100.mib.txt
Company: nortel
Module: SYNOPTICS-LS-DCM-MIB
lsDCMInfoImgLoadMode OBJECT-TYPE SYNTAX INTEGER { other(1), local(2), net(3), locAsBk(4), netIfNewer(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The source from which to load the agent image at next boot. The following value is read-only: other(1)...not applicable or some other case The following values are read-write: local(2)........get from local storage net(3)..........load from the network locAsBk(4)......try using network and if it fails then use local information. netIfNewer(5)...try loading image over the net. If can load image, and it is newer than the local image, then use it. Otherwise, use local image. If the local image is not valid, the setting will be net(3) and cannot be changed to local(2), or locAsBk(4) until a valid image file is loaded (i.e., error 'badValue' will be returned on SETS with value other than net(3)). When the local image is not valid and the network download of the image fails, the entire boot process will be repeated. When local(2) is specified, the image will be loaded from local storage. When net(3) is specified, the image will be downloaded from the network only. The image file will never be loaded from local storage, even if downloading fails and the local image exists. When locAsBk(4) is specified, a download of the image will be tried over the network. If the network download fails then the image is loaded from local storage. When netIfNewer(5) is specified, a download of the image will be tried over the network. If successful, it will then be compared to the image stored in local storage. The most recent version of the two will be used. If the local image is not valid, the network will always be used. If the network download fails then the image is loaded from the local storage. This is a temporary attribute to allow Agent Image dowload for a DCM probe in the DDS switch. It is implemented by the DDS agent only. It does not affect 28k, 58k or other Baynetworks LAN Switch agents. This attribute will be substituted by the new xprobe mib in the future. If x10 does not exist, the value has no meaning.The design assume there is at most one x10 per DDS switch." ::= { lsDCMSupport 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.1.7.7.1 | lsDCMAttPoint | 0 | 0 | This attribute allows roving of a x10 probe in DDS switch. It is implemented by the DDS agent only. It does not affect 28k, 58k … |
| 1.3.6.1.4.1.45.1.7.7.2 | lsDCMImgDownload | 0 | 0 | Action object to download a new image to the agent. The following values can be read : other (1) ..... agent in unknown state runn… |
| 1.3.6.1.4.1.45.1.7.7.4 | lsDCMImgFname | 0 | 0 | Name of the image file currently associated with the DCM. When the object is not used, the value is a zero length string. |
| 1.3.6.1.4.1.45.1.7.7.5 | lsDCMInfoImgSaveMode | 0 | 0 | Indicates what to do with the image (when loaded from the network) on the next boot. The following value can only be read: notAvai… |
| 1.3.6.1.4.1.45.1.7.7.6 | lsSubAgInfoWriteCfg | 0 | 0 | Action object to cause current configuration settings to be written to local nonvolatile storage. The following values can only b… |