Indicates what to do with the image (when loaded from
the network) on the next boot.
The following value can only be read:
notAvail(1)...the save operation is not available
The following values can be written (and read) if the
device supports this capability:
writeIfDiff(2)....save image to local storage at next
boot if image is different from saved contents
writeIfNewer(3)...save image to local storage at next
boot if image is newer than saved contents.
noWrite(4)........do not save image to local storage
at next boot, even if image is newer or
different.
This is a temporary attribute to allow Agent Image dowload for a
DCM probe in the DDS switch. It is implemented by the DDS agent only.
It does not affect 28k, 58k or other Baynetworks LAN Switch agents.
This attribute will be substituted by the new xprobe mib in the future. If x10 does not exist, the value has no meaning. The design assume
there is at most one x10 per DDS switch.
Parsed from file lsdcm100.mib.txt
Company: nortel
Module: SYNOPTICS-LS-DCM-MIB
lsDCMInfoImgSaveMode OBJECT-TYPE SYNTAX INTEGER { notAvail(1), writeIfDiff(2), writeIfNewer(3), noWrite(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates what to do with the image (when loaded from the network) on the next boot. The following value can only be read: notAvail(1)...the save operation is not available The following values can be written (and read) if the device supports this capability: writeIfDiff(2)....save image to local storage at next boot if image is different from saved contents writeIfNewer(3)...save image to local storage at next boot if image is newer than saved contents. noWrite(4)........do not save image to local storage at next boot, even if image is newer or different. This is a temporary attribute to allow Agent Image dowload for a DCM probe in the DDS switch. It is implemented by the DDS agent only. It does not affect 28k, 58k or other Baynetworks LAN Switch agents. This attribute will be substituted by the new xprobe mib in the future. If x10 does not exist, the value has no meaning. The design assume there is at most one x10 per DDS switch." ::= { lsDCMSupport 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.7.7.1 | lsDCMAttPoint | 0 | 0 | This attribute allows roving of a x10 probe in DDS switch. It is implemented by the DDS agent only. It does not affect 28k, 58k … |
1.3.6.1.4.1.45.1.7.7.2 | lsDCMImgDownload | 0 | 0 | Action object to download a new image to the agent. The following values can be read : other (1) ..... agent in unknown state runn… |
1.3.6.1.4.1.45.1.7.7.3 | lsDCMInfoImgLoadMode | 0 | 0 | The source from which to load the agent image at next boot. The following value is read-only: other(1)...not applicable or some o… |
1.3.6.1.4.1.45.1.7.7.4 | lsDCMImgFname | 0 | 0 | Name of the image file currently associated with the DCM. When the object is not used, the value is a zero length string. |
1.3.6.1.4.1.45.1.7.7.6 | lsSubAgInfoWriteCfg | 0 | 0 | Action object to cause current configuration settings to be written to local nonvolatile storage. The following values can only b… |