The NAU name of this PU.
The default value for this field is all blank
(filled with ASCII space 0x20 characters).
Parsed from file 3Com-linkconv.mib.txt
Company: None
Module: SYNC-RESEARCH-MIB
The NAU name of this PU.
The default value for this field is all blank
(filled with ASCII space 0x20 characters).
Parsed from file SYNC-RESEARCH-MIB.mib
Module: SYNC-RESEARCH-MIB
Vendor: Sync Research, Inc.
Module: SYNC-RESEARCH-MIB
[Automatically extracted from oidview.com]
puControlNAUName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The NAU name of this PU. The default value for this field is all blank (filled with ASCII space 0x20 characters)." ::= { puControlEntry 7 }
puControlNAUName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The NAU name of this PU. The default value for this field is all blank (filled with ASCII space 0x20 characters)." ::= { puControlEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.485.3.6.1.1.1.1 | puControlLineIndex | 0 | 0 | The port number that has a given PU. |
1.3.6.1.4.1.485.3.6.1.1.1.2 | puControlPUAddress | 0 | 0 | The PU address in the range of 0x01 to 0xfe. |
1.3.6.1.4.1.485.3.6.1.1.1.3 | puStatus | 0 | 0 | The status of the PU. To change status of a port an enable, enable all or disable may be set. Valid Return status are enable(d), … |
1.3.6.1.4.1.485.3.6.1.1.1.4 | puConnectionStatus | 0 | 0 | The status of the LLC type 2 Connection for this SDLC PU. |
1.3.6.1.4.1.485.3.6.1.1.1.5 | puLastClearCode | 0 | 0 | A two octet field indicating the Last Clearing Cause and Diagnostic Field of the last failed connection attempt (a.k.a. call atte… |
1.3.6.1.4.1.485.3.6.1.1.1.6 | puControlFailureCode | 0 | 0 | This entry contains the failure codes if the associated PU is in the failed state. |
1.3.6.1.4.1.485.3.6.1.1.1.8 | puConnectionAttemptCount | 0 | 0 | The number of connection attempts performed. This count is set to zero at startup, and after every loss of an estabished session. |
1.3.6.1.4.1.485.3.6.1.1.1.9 | puStatusIgnored | 0 | 0 | This field is used for consolidating status of the unit. The status of this pu is not put into consideration when consolidating s… |
1.3.6.1.4.1.485.3.6.1.1.1.10 | puStatusAcknowledged | 0 | 0 | This field is used for consolidating status of the unit. When this field is set to yes, the unit will re-consolidate its status w… |
1.3.6.1.4.1.485.3.6.1.1.1.11 | puLastDlciCleared | 0 | 0 | Specifies the dlci that the last clear code was associated with. If the last clear code was not associated with a virtual route,… |
1.3.6.1.4.1.485.3.6.1.1.1.12 | puCurrentDlci | 0 | 0 | Specifies the DLCI active for a session at this time. For LAN or X25 network interface, this field is set to 0 |
1.3.6.1.4.1.485.3.6.1.1.1.13 | puLastMACCleared | 0 | 0 | Specifies the MAC address that the last clear code was associated with. |
1.3.6.1.4.1.485.3.6.1.1.1.14 | puCurrentMAC | 0 | 0 | Specifies the MAC address that the current session is associated with. For X25 network type, this is set to 0. |
1.3.6.1.4.1.485.3.6.1.1.1.15 | puNetworkType | 0 | 0 | Specifies netowrk type that the current session is associated with. |
1.3.6.1.4.1.485.3.6.1.1.1.16 | puCurrentConnectionType | 0 | 0 | Specifies network layer that the current session is associated with. |
1.3.6.1.4.1.485.3.6.1.1.1.17 | puLastSVCCleared | 0 | 0 | Specifies the LCN that the last clear code is associated with. If the last clear code was not associated with a X25 SVC, i.e. the… |
1.3.6.1.4.1.485.3.6.1.1.1.18 | puCurrentSVC | 0 | 0 | Specifies the that the current session is associated with. For non X25 network type, this field is set to 0 |
1.3.6.1.4.1.485.3.6.1.1.1.19 | puLastLocalDTECleared | 0 | 0 | Specifies the local DTE address that the last clear code is associated with. For non X25 network type, this field is set to 0 |
1.3.6.1.4.1.485.3.6.1.1.1.20 | puLastRemoteDTECleared | 0 | 0 | Specifies the remote DTE address that the last clear code is associated with. For non X25 network type, this field is set to 0 |
1.3.6.1.4.1.485.3.6.1.1.1.21 | puCurrentLocalDTE | 0 | 0 | Specifies the local DTE address that the current session is associated with. For non X25 network type, this field is set to 0 |
1.3.6.1.4.1.485.3.6.1.1.1.22 | puCurrentRemoteDTE | 0 | 0 | Specifies the remote DTE address that the current session is associated with. For non X25 network type, this field is set to 0 |
1.3.6.1.4.1.485.3.6.1.1.1.23 | puIsDynamic | 0 | 0 | The type of PU. YES means that the PU is a dynamic pu created by auto LLC. The puStatus for any dynamic PU must be enabled |