This field is used for consolidating status of the
unit. The status of this pu is not put into
consideration when consolidating status of the
unit if this field is set to yes.
Parsed from file SYNC-RESEARCH-MIB.mib
Module: SYNC-RESEARCH-MIB
Vendor: Sync Research, Inc.
Module: SYNC-RESEARCH-MIB
[Automatically extracted from oidview.com]
puStatusIgnored OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This field is used for consolidating status of the unit. The status of this pu is not put into consideration when consolidating status of the unit if this field is set to yes." ::= { puControlEntry 9 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.485.3.6.1.1.1.1 | puControlLineIndex | 0 | 0 | The port number that has a given PU. |
1.3.6.1.4.1.485.3.6.1.1.1.2 | puControlPUAddress | 0 | 0 | The PU address in the range of 0x01 to 0xfe. |
1.3.6.1.4.1.485.3.6.1.1.1.3 | puStatus | 0 | 0 | The status of the PU. To change status of a port an enable, enable all or disable may be set. Valid Return status are enable(d), … |
1.3.6.1.4.1.485.3.6.1.1.1.4 | puConnectionStatus | 0 | 0 | The status of the LLC type 2 Connection for this SDLC PU. |
1.3.6.1.4.1.485.3.6.1.1.1.5 | puLastClearCode | 0 | 0 | A two octet field indicating the Last Clearing Cause and Diagnostic Field of the last failed connection attempt (a.k.a. call atte… |
1.3.6.1.4.1.485.3.6.1.1.1.6 | puControlFailureCode | 0 | 0 | This entry contains the failure codes if the associated PU is in the failed state. |
1.3.6.1.4.1.485.3.6.1.1.1.7 | puControlNAUName | 0 | 0 | The NAU name of this PU. The default value for this field is all blank (filled with ASCII space 0x20 characters). |
1.3.6.1.4.1.485.3.6.1.1.1.8 | puConnectionAttemptCount | 0 | 0 | The number of connection attempts performed. This count is set to zero at startup, and after every loss of an estabished session. |
1.3.6.1.4.1.485.3.6.1.1.1.10 | puStatusAcknowledged | 0 | 0 | This field is used for consolidating status of the unit. When this field is set to yes, the unit will re-consolidate its status w… |
1.3.6.1.4.1.485.3.6.1.1.1.11 | puLastDlciCleared | 0 | 0 | Specifies the dlci that the last clear code was associated with. If the last clear code was not associated with a virtual route,… |
1.3.6.1.4.1.485.3.6.1.1.1.12 | puCurrentDlci | 0 | 0 | Specifies the DLCI active for a session at this time. For LAN or X25 network interface, this field is set to 0 |
1.3.6.1.4.1.485.3.6.1.1.1.13 | puLastMACCleared | 0 | 0 | Specifies the MAC address that the last clear code was associated with. |
1.3.6.1.4.1.485.3.6.1.1.1.14 | puCurrentMAC | 0 | 0 | Specifies the MAC address that the current session is associated with. For X25 network type, this is set to 0. |
1.3.6.1.4.1.485.3.6.1.1.1.15 | puNetworkType | 0 | 0 | Specifies netowrk type that the current session is associated with. |
1.3.6.1.4.1.485.3.6.1.1.1.16 | puCurrentConnectionType | 0 | 0 | Specifies network layer that the current session is associated with. |
1.3.6.1.4.1.485.3.6.1.1.1.17 | puLastSVCCleared | 0 | 0 | Specifies the LCN that the last clear code is associated with. If the last clear code was not associated with a X25 SVC, i.e. the… |
1.3.6.1.4.1.485.3.6.1.1.1.18 | puCurrentSVC | 0 | 0 | Specifies the that the current session is associated with. For non X25 network type, this field is set to 0 |
1.3.6.1.4.1.485.3.6.1.1.1.19 | puLastLocalDTECleared | 0 | 0 | Specifies the local DTE address that the last clear code is associated with. For non X25 network type, this field is set to 0 |
1.3.6.1.4.1.485.3.6.1.1.1.20 | puLastRemoteDTECleared | 0 | 0 | Specifies the remote DTE address that the last clear code is associated with. For non X25 network type, this field is set to 0 |
1.3.6.1.4.1.485.3.6.1.1.1.21 | puCurrentLocalDTE | 0 | 0 | Specifies the local DTE address that the current session is associated with. For non X25 network type, this field is set to 0 |
1.3.6.1.4.1.485.3.6.1.1.1.22 | puCurrentRemoteDTE | 0 | 0 | Specifies the remote DTE address that the current session is associated with. For non X25 network type, this field is set to 0 |
1.3.6.1.4.1.485.3.6.1.1.1.23 | puIsDynamic | 0 | 0 | The type of PU. YES means that the PU is a dynamic pu created by auto LLC. The puStatus for any dynamic PU must be enabled |