This reports the status of any remote V54 testing initiated by
this unit. Remote V54 loopback commands are intended to place
compatible external equipment into a loopback state. The initiating
unit will maintain normal data flows during these tests.
(1) V54 loop up issued - indicates the node has sent a standard
in-band loop up pattern towards the WAN per ITU V.54. This is a
framed T1 signal consisting of a pseudorandom signal in place of
all user data (that is only in the DS0s assigned to the DTE). A
device terminating the fractional T1 data is expected to enter
a bi-directional DTE Loopback condition upon recognition of this
pattern. The initating unit doesn't know if the command was accepted
by the remote unit. This pattern will not traverse a typical frame
relay network and is designed for circuit-switched diagnostics.
(2) V54 loop down issued - indicates the node has sent a standard
in-band loop down pattern towards the WAN per ITU V.54. This is a
framed T1 signal consisting of a pseudorandom signal in place of
all user data (that is only in the DS0s assigned to the DTE). A
device terminating the fractional T1 data is expected to clear
a bi-directional DTE Loopback condition upon recognition of this
pattern. The initating unit doesn't know if the command was accepted
by the remote unit.
Parsed from file TFRAP.MIB.txt
Company: None
Module: TFRAP-MIB
This reports the status of any remote V54 testing initiated by
this unit. Remote V54 loopback commands are intended to place
compatible external equipment into a loopback state. The initiating
unit will maintain normal data flows during these tests.
(1) V54 loop up issued - indicates the node has sent a standard
in-band loop up pattern towards the WAN per ITU V.54. This is a
framed T1 signal consisting of a pseudorandom signal in place of
all user data (that is only in the DS0s assigned to the DTE). A
device terminating the fractional T1 data is expected to enter
a bi-directional DTE Loopback condition upon recognition of this
pattern. The initating unit doesn't know if the command was accepted
by the remote unit. This pattern will not traverse a typical frame
relay network and is designed for circuit-switched diagnostics.
(2) V54 loop down issued - indicates the node has sent a standard
in-band loop down pattern towards the WAN per ITU V.54. This is a
framed T1 signal consisting of a pseudorandom signal in place of
all user data (that is only in the DS0s assigned to the DTE). A
device terminating the fractional T1 data is expected to clear
a bi-directional DTE Loopback condition upon recognition of this
pattern. The initating unit doesn't know if the command was accepted
by the remote unit.
Parsed from file TFRAP-MIB.mib
Module: TFRAP-MIB
Vendor: Sync Research, Inc.
Module: TFRAP-MIB
[Automatically extracted from oidview.com]
tfrapDiagDteV54Lpbk OBJECT-TYPE SYNTAX INTEGER { loopback-enable (1), loopback-disable (2) } ACCESS read-only STATUS mandatory DESCRIPTION "This reports the status of any remote V54 testing initiated by this unit. Remote V54 loopback commands are intended to place compatible external equipment into a loopback state. The initiating unit will maintain normal data flows during these tests. (1) V54 loop up issued - indicates the node has sent a standard in-band loop up pattern towards the WAN per ITU V.54. This is a framed T1 signal consisting of a pseudorandom signal in place of all user data (that is only in the DS0s assigned to the DTE). A device terminating the fractional T1 data is expected to enter a bi-directional DTE Loopback condition upon recognition of this pattern. The initating unit doesn't know if the command was accepted by the remote unit. This pattern will not traverse a typical frame relay network and is designed for circuit-switched diagnostics. (2) V54 loop down issued - indicates the node has sent a standard in-band loop down pattern towards the WAN per ITU V.54. This is a framed T1 signal consisting of a pseudorandom signal in place of all user data (that is only in the DS0s assigned to the DTE). A device terminating the fractional T1 data is expected to clear a bi-directional DTE Loopback condition upon recognition of this pattern. The initating unit doesn't know if the command was accepted by the remote unit." ::= { tfrapDiagDteTable 4 }
tfrapDiagDteV54Lpbk OBJECT-TYPE SYNTAX INTEGER { loopback-enable (1), loopback-disable (2) } ACCESS read-only STATUS mandatory DESCRIPTION "This reports the status of any remote V54 testing initiated by this unit. Remote V54 loopback commands are intended to place compatible external equipment into a loopback state. The initiating unit will maintain normal data flows during these tests. (1) V54 loop up issued - indicates the node has sent a standard in-band loop up pattern towards the WAN per ITU V.54. This is a framed T1 signal consisting of a pseudorandom signal in place of all user data (that is only in the DS0s assigned to the DTE). A device terminating the fractional T1 data is expected to enter a bi-directional DTE Loopback condition upon recognition of this pattern. The initating unit doesn't know if the command was accepted by the remote unit. This pattern will not traverse a typical frame relay network and is designed for circuit-switched diagnostics. (2) V54 loop down issued - indicates the node has sent a standard in-band loop down pattern towards the WAN per ITU V.54. This is a framed T1 signal consisting of a pseudorandom signal in place of all user data (that is only in the DS0s assigned to the DTE). A device terminating the fractional T1 data is expected to clear a bi-directional DTE Loopback condition upon recognition of this pattern. The initating unit doesn't know if the command was accepted by the remote unit." ::= { tfrapDiagDteTable 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.485.5.3.3.4.0 | tfrapDiagDteV54Lpbk | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.485.5.3.3.1 | tfrapDiagDteSigRTS | 1 | 1 | Status of the Request to Send (RTS) signal from the DTE port. (1) RTS Active (2) RTS Inactive |
1.3.6.1.4.1.485.5.3.3.2 | tfrapDiagDteSigDTR | 1 | 1 | Status of the Data Terminal Ready (DTR) signal from the DTE port. (1) DTR Active (2) DTR Inactive |
1.3.6.1.4.1.485.5.3.3.3 | tfrapDiagDteLclLpbk | 1 | 1 | Controls the DTE loopback state. This is a bi-directional loopback state where both the DTE and WAN ports are placed in line loop… |
1.3.6.1.4.1.485.5.3.3.5 | tfrapDiagDteRmtV54Lpbk | 1 | 1 | Remote V54 loopback commands are intended to place compatible external equipment into a loopback state. The initiating unit will … |
1.3.6.1.4.1.485.5.3.3.6 | tfrapDiagDteBerState | 1 | 1 | The unit is capable of sending a pseudorandom test pattern (511 or QRSS) out the WAN and monitoring the WAN received data for the… |
1.3.6.1.4.1.485.5.3.3.7 | tfrapDiagDteBerStatus | 1 | 1 | Displays the current BERT test sync status. (1) BERT is not running (2) BERT is running but is not in sync (3) BERT is running and… |
1.3.6.1.4.1.485.5.3.3.8 | tfrapDiagDteBerErrors | 1 | 1 | Displays the number of errors detected in Bert Test. |
1.3.6.1.4.1.485.5.3.3.9 | tfrapDiagDteBerErrSec | 1 | 1 | Displays the number of seconds containing 1 or more errors in BERT Test. |
1.3.6.1.4.1.485.5.3.3.10 | tfrapDiagDteBerTimeElaps | 1 | 1 | Elapsed time since BERT test was started or cleared. |
1.3.6.1.4.1.485.5.3.3.11 | tfrapDiagDteBerResyncs | 1 | 1 | Displays the number of times BERT test has synched up on the pattern. The BERT will attempt to resynchronize in response to exces… |
1.3.6.1.4.1.485.5.3.3.12 | tfrapDiagDteBerPattern | 1 | 1 | The type of pseudorandom BERT pattern used. (1) 511: 9-bit pseudorandom pattern (2) QRSS: 20-bit pseudorandom pattern with no more… |
1.3.6.1.4.1.485.5.3.3.13 | tfrapDiagDteTimeRemaining | 1 | 1 | The remaining time on the active diagnostic before it times out and the unit returns to normal operation. The time is hundredths … |