Displays the current BERT test sync status.
(1) BERT is not running
(2) BERT is running but is not in sync
(3) BERT is running and has detected a received BERT
Parsed from file TFRAP.MIB.txt
Company: None
Module: TFRAP-MIB
Displays the current BERT test sync status.
(1) BERT is not running
(2) BERT is running but is not in sync
(3) BERT is running and has detected a received BERT
Parsed from file TFRAP-MIB.mib
Module: TFRAP-MIB
Vendor: Sync Research, Inc.
Module: TFRAP-MIB
[Automatically extracted from oidview.com]
tfrapDiagDteBerStatus OBJECT-TYPE SYNTAX INTEGER { bert-off (1), bert-out-of-sync (2), bert-in-sync (3) } ACCESS read-only STATUS mandatory DESCRIPTION "Displays the current BERT test sync status. (1) BERT is not running (2) BERT is running but is not in sync (3) BERT is running and has detected a received BERT" ::= { tfrapDiagDteTable 7 }
tfrapDiagDteBerStatus OBJECT-TYPE SYNTAX INTEGER { bert-off (1), bert-out-of-sync (2), bert-in-sync (3) } ACCESS read-only STATUS mandatory DESCRIPTION "Displays the current BERT test sync status. (1) BERT is not running (2) BERT is running but is not in sync (3) BERT is running and has detected a received BERT" ::= { tfrapDiagDteTable 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.5.3.3.7.0 | tfrapDiagDteBerStatus | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.5.3.3.1 | tfrapDiagDteSigRTS | 1 | 1 | Status of the Request to Send (RTS) signal from the DTE port. (1) RTS Active (2) RTS Inactive |
| 1.3.6.1.4.1.485.5.3.3.2 | tfrapDiagDteSigDTR | 1 | 1 | Status of the Data Terminal Ready (DTR) signal from the DTE port. (1) DTR Active (2) DTR Inactive |
| 1.3.6.1.4.1.485.5.3.3.3 | tfrapDiagDteLclLpbk | 1 | 1 | Controls the DTE loopback state. This is a bi-directional loopback state where both the DTE and WAN ports are placed in line loop… |
| 1.3.6.1.4.1.485.5.3.3.4 | tfrapDiagDteV54Lpbk | 1 | 1 | This reports the status of any remote V54 testing initiated by this unit. Remote V54 loopback commands are intended to place comp… |
| 1.3.6.1.4.1.485.5.3.3.5 | tfrapDiagDteRmtV54Lpbk | 1 | 1 | Remote V54 loopback commands are intended to place compatible external equipment into a loopback state. The initiating unit will … |
| 1.3.6.1.4.1.485.5.3.3.6 | tfrapDiagDteBerState | 1 | 1 | The unit is capable of sending a pseudorandom test pattern (511 or QRSS) out the WAN and monitoring the WAN received data for the… |
| 1.3.6.1.4.1.485.5.3.3.8 | tfrapDiagDteBerErrors | 1 | 1 | Displays the number of errors detected in Bert Test. |
| 1.3.6.1.4.1.485.5.3.3.9 | tfrapDiagDteBerErrSec | 1 | 1 | Displays the number of seconds containing 1 or more errors in BERT Test. |
| 1.3.6.1.4.1.485.5.3.3.10 | tfrapDiagDteBerTimeElaps | 1 | 1 | Elapsed time since BERT test was started or cleared. |
| 1.3.6.1.4.1.485.5.3.3.11 | tfrapDiagDteBerResyncs | 1 | 1 | Displays the number of times BERT test has synched up on the pattern. The BERT will attempt to resynchronize in response to exces… |
| 1.3.6.1.4.1.485.5.3.3.12 | tfrapDiagDteBerPattern | 1 | 1 | The type of pseudorandom BERT pattern used. (1) 511: 9-bit pseudorandom pattern (2) QRSS: 20-bit pseudorandom pattern with no more… |
| 1.3.6.1.4.1.485.5.3.3.13 | tfrapDiagDteTimeRemaining | 1 | 1 | The remaining time on the active diagnostic before it times out and the unit returns to normal operation. The time is hundredths … |