Vendor: Sync Research, Inc.
Module: SFRAP-MIB
[Automatically extracted from oidview.com]
sfrapCfgAppTable OBJECT IDENTIFIER ::= { sfrapConfiguration 2 }
sfrapCfgAppTable OBJECT IDENTIFIER ::= { sfrapConfiguration 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.485.7.2.2.2 | sfrapCfgAppCircuitId | 1 | 1 | Alphanumeric circuit identifier may be provided by the service provider for reference or assigned arbitrarily per user requiremen… |
1.3.6.1.4.1.485.7.2.2.3 | sfrapCfgAppType | 1 | 1 | This unit provides many features specifically adapted to Frame Relay transmission links; this includes diagnostic utilities, stat… |
1.3.6.1.4.1.485.7.2.2.4 | sfrapCfgAppFormat | 1 | 1 | Refer to Application Type. Frame Relay is based upon HDLC framing. To operate in a Frame Relay application the Format must be set… |
1.3.6.1.4.1.485.7.2.2.5 | sfrapCfgAppLpbkTimeout | 1 | 1 | The length of time a service-impacting loopback or diagnostic utility may run before automatically returning to normal operation.… |
1.3.6.1.4.1.485.7.2.2.6 | sfrapCfgAppTxClkmode | 1 | 1 | This MIB object is being obsoleted. The mode in which the TO-DTE and TO-DCE Transmit clocks are set to. The transmit clocks can … |
1.3.6.1.4.1.485.7.2.2.7 | sfrapCfgAppTxtiming | 1 | 1 | Serial Transmit Timing mode. Loop-1 (1) uses the clock returned from the TO-DTE (TT/TCE) to sample tx data, Loop-2 (2) uses the c… |
1.3.6.1.4.1.485.7.2.2.8 | sfrapCfgAppOperationMode | 1 | 1 | Describes the Operational Mode of the SFRAP: (1) cut-through used to place unit in cut-thru (2) inband used to place uni… |
1.3.6.1.4.1.485.7.2.2.9 | sfrapCfgAppCutthruTimeout | 1 | 1 | The amount of time Cuthtru mode may run before timing out and automatically terminating. The timeout is in minutes and a value of… |
1.3.6.1.4.1.485.7.2.2.10 | sfrapCfgAppPerfBuffLimit | 1 | 1 | This value controls the throttling mechanism used to determine the optimum level of statistical processing versus manageability o… |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.485.7.2.1 | sfrapCfgMgmtTable | 5 | 67 | None |
1.3.6.1.4.1.485.7.2.4 | sfrapCfgDteTable | 1 | 6 | The table of DTE port configurations. |
1.3.6.1.4.1.485.7.2.5 | sfrapCfgFrTable | 9 | 18 | None |
1.3.6.1.4.1.485.7.2.6 | sfrapCfgVnipTable | 8 | 23 | None |
1.3.6.1.4.1.485.7.2.7 | sfrapCfgFrPerf | 13 | 41 | None |
1.3.6.1.4.1.485.7.2.8 | sfrapCfgSecurityTable | 5 | 10 | None |
1.3.6.1.4.1.485.7.2.12 | sfrapCfgLock | 1 | 1 | Request to start configuration download and lock out any other means of configuring the unit. The integer passed in represents th… |
1.3.6.1.4.1.485.7.2.13 | sfrapCfgLockID | 1 | 1 | Returns the IP Address of the management station currently in control of configuration. A unit that is not in a configuration lo… |
1.3.6.1.4.1.485.7.2.14 | sfrapCfgID | 1 | 1 | A read of this object returns the Current Configuration ID string. A write sets the Configuration ID string. The string contains… |
1.3.6.1.4.1.485.7.2.15 | sfrapCfgStatus | 1 | 1 | The status of a configuration install is reported here. On startup, a status of success will be reported. (1) The configuration h… |
1.3.6.1.4.1.485.7.2.16 | sfrapCfgUnlock | 1 | 1 | The management station sets this variable to complete the configuration install process. Un-lock (1) notifies the agent to remove… |
1.3.6.1.4.1.485.7.2.17 | sfrapCfgUpdate | 1 | 1 | The management station sets this variable to complete the configuration install process. Update (1) notifies the agent to start t… |