Vendor: Sync Research, Inc.
Module: SFRAP-MIB
[Automatically extracted from oidview.com]
sfrapCfgFrTable OBJECT IDENTIFIER ::= { sfrapConfiguration 5 }
sfrapCfgFrTable OBJECT IDENTIFIER ::= { sfrapConfiguration 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.485.7.2.5.1 | sfrapCfgFrAddrLen | 1 | 1 | Defines the size of the DLCI address field of the Frame Relay header. This setting must correspond to the Frame Relay transmissio… |
1.3.6.1.4.1.485.7.2.5.2 | sfrapCfgFrCrcMode | 1 | 1 | This defines the manner in which the unit handles HDLC protocol errors (crc errors) in a Frame Relay application. If Discard is s… |
1.3.6.1.4.1.485.7.2.5.3 | sfrapCfgFrLmiType | 1 | 1 | The LMI type used in a Frame Relay application. This setting must match the attached Frame Relay device configuration. Annex-A an… |
1.3.6.1.4.1.485.7.2.5.4 | sfrapCfgFrLmiInactivityTimeout | 1 | 1 | Timer used by the unit to determine that an attached device is not participating in the LMI protocol and that the unit should att… |
1.3.6.1.4.1.485.7.2.5.5 | sfrapCfgFrLmiKeepaliveTimeout | 1 | 1 | Timer used by the unit to determine the frequency at which Status Enquiries are issued during LMI sourcing states where the unit… |
1.3.6.1.4.1.485.7.2.5.6 | sfrapCfgFrAddrResMode | 1 | 1 | Enable ARP (2), INARP (3), both (4), or neither (1). |
1.3.6.1.4.1.485.7.2.5.7 | sfrapCfgFrAddrResInarpTimer | 1 | 1 | The frequency of INARP requests in seconds from 5 seconds to 86400 seconds (24 hours). |
1.3.6.1.4.1.485.7.2.5.8 | sfrapCfgFrLmiFullStatus | 1 | 1 | Timer used by the unit to determine if an LMI Full Status Report is missing. In the absence of a Full Status report for the durat… |
1.3.6.1.4.1.485.7.2.5.9 | sfrapCfgFrAddrResDlcis | 1 | 1 | Address Resolution Dlcis determines which dlcis are used for address resolution. The choices include using the configured manage… |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.485.7.2.1 | sfrapCfgMgmtTable | 5 | 67 | None |
1.3.6.1.4.1.485.7.2.2 | sfrapCfgAppTable | 9 | 18 | None |
1.3.6.1.4.1.485.7.2.4 | sfrapCfgDteTable | 1 | 6 | The table of DTE port configurations. |
1.3.6.1.4.1.485.7.2.6 | sfrapCfgVnipTable | 8 | 23 | None |
1.3.6.1.4.1.485.7.2.7 | sfrapCfgFrPerf | 13 | 41 | None |
1.3.6.1.4.1.485.7.2.8 | sfrapCfgSecurityTable | 5 | 10 | None |
1.3.6.1.4.1.485.7.2.12 | sfrapCfgLock | 1 | 1 | Request to start configuration download and lock out any other means of configuring the unit. The integer passed in represents th… |
1.3.6.1.4.1.485.7.2.13 | sfrapCfgLockID | 1 | 1 | Returns the IP Address of the management station currently in control of configuration. A unit that is not in a configuration lo… |
1.3.6.1.4.1.485.7.2.14 | sfrapCfgID | 1 | 1 | A read of this object returns the Current Configuration ID string. A write sets the Configuration ID string. The string contains… |
1.3.6.1.4.1.485.7.2.15 | sfrapCfgStatus | 1 | 1 | The status of a configuration install is reported here. On startup, a status of success will be reported. (1) The configuration h… |
1.3.6.1.4.1.485.7.2.16 | sfrapCfgUnlock | 1 | 1 | The management station sets this variable to complete the configuration install process. Un-lock (1) notifies the agent to remove… |
1.3.6.1.4.1.485.7.2.17 | sfrapCfgUpdate | 1 | 1 | The management station sets this variable to complete the configuration install process. Update (1) notifies the agent to start t… |