The state of this trunk as indicated by the trunk's dip
switches.
Parsed from file isd_mib.txt
Company: a3com
Module: CHIPCOMMIB
Vendor: 3Com
Module: CHIPCOMMIB (isd_mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
ol52nnMCRTrunkDipAdminState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of this trunk as indicated by the trunk's dip switches." ::= { ol52nnMCRTrunkEntry 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.49.2.3.1.4.4.59.3.1.1 | ol52nnMCRTrunkSlotIndex | 0 | 0 | The slot number of this trunk's module. |
1.3.6.1.4.1.49.2.3.1.4.4.59.3.1.2 | ol52nnMCRTrunkIndex | 0 | 0 | The trunk number of this trunk. |
1.3.6.1.4.1.49.2.3.1.4.4.59.3.1.4 | ol52nnMCRTrunkPhantomMode | 0 | 0 | If enabled(1), then the trunk will operate in Phantom Mode. Note that Cable Monitor and Phantom Modes are mutually exclusive. I… |
1.3.6.1.4.1.49.2.3.1.4.4.59.3.1.5 | ol52nnMCRTrunkDipPhantomMode | 0 | 0 | The Phantom Mode as indicated by this module's dip switches. Refer to previous object's description. |
1.3.6.1.4.1.49.2.3.1.4.4.59.3.1.6 | ol52nnMCRTrunkCableMon | 0 | 0 | The cable monitor configuration for this trunk. Note that Cable Monitor and Phantom Modes are mutually exclusive. If one attribu… |
1.3.6.1.4.1.49.2.3.1.4.4.59.3.1.7 | ol52nnMCRTrunkDipCableMon | 0 | 0 | The cable monitor configuration as indicated by this module's dipswitches. |
1.3.6.1.4.1.49.2.3.1.4.4.59.3.1.8 | ol52nnMCRTrunkJumperCableImp | 0 | 0 | The setting of this trunk's impedance matching, with ohm100(1) corresponding to unshielded twisted pair cabling and ohm150(2) cor… |
1.3.6.1.4.1.49.2.3.1.4.4.59.3.1.9 | ol52nnMCRTrunkNetMapState | 0 | 0 | The map state of the copper Ring In trunk. This should be set to external(3) for Ring In trunks which connect to external hubs. … |
1.3.6.1.4.1.49.2.3.1.4.4.59.3.1.10 | ol52nnMCRTrunkExtBcnRecovery | 0 | 0 | Indicates whether the trunk is connected to a segment that will perform beacon recovery. This should be set to exists(1) for tru… |