Controls whether or not the DCC uses the FDL as its
transport. The FDL is only available when the DS1 line type
is ESF, a full DS1 interface is being used, and transportation
of the FDL completely through the network is supported.
The value enabled(1) enables the transportation of the DCC
using the FDL. The value disabled(2) disables the use of the
FDL to transport the DCC, which implies that the DCC is
transported by some other means.
This object interoperates with the sc553NetworkLineType object. The
value of this object can be set to enabled(1) only when the
value of the sc553NetworkLineType is one of the ESF values.
Parsed from file gdcsc553.mib.txt
Company: None
Module: GDC-SC553-MIB
Controls whether or not the DCC uses the FDL as its
transport. The FDL is only available when the DS1 line type
is ESF, a full DS1 interface is being used, and transportation
of the FDL completely through the network is supported.
The value enabled(1) enables the transportation of the DCC
using the FDL. The value disabled(2) disables the use of the
FDL to transport the DCC, which implies that the DCC is
transported by some other means.
This object interoperates with the sc553NetworkLineType object. The
value of this object can be set to enabled(1) only when the
value of the sc553NetworkLineType is one of the ESF values.
Parsed from file GDC-SC553-MIB.mib
Module: GDC-SC553-MIB
sc553NetworkFDLdcc OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Controls whether or not the DCC uses the FDL as its transport. The FDL is only available when the DS1 line type is ESF, a full DS1 interface is being used, and transportation of the FDL completely through the network is supported. The value enabled(1) enables the transportation of the DCC using the FDL. The value disabled(2) disables the use of the FDL to transport the DCC, which implies that the DCC is transported by some other means. This object interoperates with the sc553NetworkLineType object. The value of this object can be set to enabled(1) only when the value of the sc553NetworkLineType is one of the ESF values." ::= { sc553NetworkConfigEntry 11 }
Vendor: General DataComm, Inc.
Module: GDC-SC553-MIB
[Automatically extracted from oidview.com]
sc553NetworkFDLdcc OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Controls whether or not the DCC uses the FDL as its transport. The FDL is only available when the DS1 line type is ESF, a full DS1 interface is being used, and transportation of the FDL completely through the network is supported. The value enabled(1) enables the transportation of the DCC using the FDL. The value disabled(2) disables the use of the FDL to transport the DCC, which implies that the DCC is transported by some other means. This object interoperates with the sc553NetworkLineType object. The value of this object can be set to enabled(1) only when the value of the sc553NetworkLineType is one of the ESF values." ::= { sc553NetworkConfigEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.6.11.2.2.1.1 | sc553NetworkConfigIndex | 0 | 0 | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance whi… |
| 1.3.6.1.4.1.498.6.11.2.2.1.2 | sc553NetworkAdminLineType | 0 | 0 | The values describe: 'auto' indicates the unit will determine framing. 'manEsf' indicates manual selection of extended superfra… |
| 1.3.6.1.4.1.498.6.11.2.2.1.3 | sc553NetworkOperLineType | 0 | 0 | The values describe: 'manEsf' indicates the current setting of Line type. 'manD4'indicates the current setting of Line type. 'u… |
| 1.3.6.1.4.1.498.6.11.2.2.1.4 | sc553NetworkInterfaceType | 0 | 0 | The operating mode of the interface. Setting the value of this object to ds1(1) configures the interface as standard DS1. Setti… |
| 1.3.6.1.4.1.498.6.11.2.2.1.5 | sc553NetworkPreequalization | 0 | 0 | Is the preequalization of the transmitter of the interface. This object interoperates with the object sc553NetworkInterfaceType.… |
| 1.3.6.1.4.1.498.6.11.2.2.1.6 | sc553NetworkAdminLineBuildout | 0 | 0 | This variable is used to set the Transmit Ntwk Build-Out value on the network side and is only valid if the sc553NetworkInterface… |
| 1.3.6.1.4.1.498.6.11.2.2.1.7 | sc553NetworkOperLineBuildout | 0 | 0 | This variable is used to report the current Ntwk build-out setting if the sc553NetworkInterfaceType is set for ds1(1). tx00dB(2)… |
| 1.3.6.1.4.1.498.6.11.2.2.1.8 | sc553NetworkOnesDensity | 0 | 0 | The ones density restriction for the interface. The values of this object define the ones density restriction that is enforced o… |
| 1.3.6.1.4.1.498.6.11.2.2.1.9 | sc553NetworkTransmitClockSource | 0 | 0 | None |
| 1.3.6.1.4.1.498.6.11.2.2.1.10 | sc553NetworkFallbackClockSource | 0 | 0 | None |
| 1.3.6.1.4.1.498.6.11.2.2.1.12 | sc553NetworkAISLoopdown | 0 | 0 | The time in seconds when receiving a continuous AIS signal before a remotely initiated loopback is terminated. When this object … |
| 1.3.6.1.4.1.498.6.11.2.2.1.13 | sc553NetworkLoopbackConfig | 0 | 0 | This variable is used to set the In-Band DS1 Loopback Code Detection. none(1) refers to when the in-band loopback codes are ignor… |
| 1.3.6.1.4.1.498.6.11.2.2.1.14 | sc553NetworkLineCoding | 0 | 0 | This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its chara… |
| 1.3.6.1.4.1.498.6.11.2.2.1.15 | sc553NetworkFdl | 0 | 0 | This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties: sc553Fdl-none(1) indicates th… |