This variable is used to set the Transmit Ntwk
Build-Out value on the network side and is only
valid if the sc553NetworkInterfaceType is set for ds1(1).
The values, in sequence, describe:
auto(16) indicates auto detection of receive level to
determine the appropriate Ntwk build out without controller intervention
man00dB(10) indicates manual selection of 0.0 dB transmit Ntwk build out
man75dB(11) indicates manual selection of -7.5 dB transmit Ntwk build out
man150dB(12) indicates manual selection of -15.0 dB transmit Ntwk build out
man225B(13) indicates manual selection of -22.5 dB transmit Ntwk build out
Parsed from file gdcsc553.mib.txt
Company: None
Module: GDC-SC553-MIB
This variable is used to set the Transmit Ntwk
Build-Out value on the network side and is only
valid if the sc553NetworkInterfaceType is set for ds1(1).
The values, in sequence, describe:
auto(16) indicates auto detection of receive level to
determine the appropriate Ntwk build out without controller intervention
man00dB(10) indicates manual selection of 0.0 dB transmit Ntwk build out
man75dB(11) indicates manual selection of -7.5 dB transmit Ntwk build out
man150dB(12) indicates manual selection of -15.0 dB transmit Ntwk build out
man225B(13) indicates manual selection of -22.5 dB transmit Ntwk build out
Parsed from file GDC-SC553-MIB.mib
Module: GDC-SC553-MIB
sc553NetworkAdminLineBuildout OBJECT-TYPE SYNTAX INTEGER { man00dB(10), man75dB(11), man150dB(12), man225dB(13), auto(16) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used to set the Transmit Ntwk Build-Out value on the network side and is only valid if the sc553NetworkInterfaceType is set for ds1(1). The values, in sequence, describe: auto(16) indicates auto detection of receive level to determine the appropriate Ntwk build out without controller intervention man00dB(10) indicates manual selection of 0.0 dB transmit Ntwk build out man75dB(11) indicates manual selection of -7.5 dB transmit Ntwk build out man150dB(12) indicates manual selection of -15.0 dB transmit Ntwk build out man225B(13) indicates manual selection of -22.5 dB transmit Ntwk build out" ::= { sc553NetworkConfigEntry 6 }
Vendor: General DataComm, Inc.
Module: GDC-SC553-MIB
[Automatically extracted from oidview.com]
sc553NetworkAdminLineBuildout OBJECT-TYPE SYNTAX INTEGER { man00dB(10), man75dB(11), man150dB(12), man225dB(13), auto(16) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used to set the Transmit Ntwk Build-Out value on the network side and is only valid if the sc553NetworkInterfaceType is set for ds1(1). The values, in sequence, describe: auto(16) indicates auto detection of receive level to determine the appropriate Ntwk build out without controller intervention man00dB(10) indicates manual selection of 0.0 dB transmit Ntwk build out man75dB(11) indicates manual selection of -7.5 dB transmit Ntwk build out man150dB(12) indicates manual selection of -15.0 dB transmit Ntwk build out man225B(13) indicates manual selection of -22.5 dB transmit Ntwk build out" ::= { sc553NetworkConfigEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.6.11.2.2.1.1 | sc553NetworkConfigIndex | 0 | 0 | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance whi… |
| 1.3.6.1.4.1.498.6.11.2.2.1.2 | sc553NetworkAdminLineType | 0 | 0 | The values describe: 'auto' indicates the unit will determine framing. 'manEsf' indicates manual selection of extended superfra… |
| 1.3.6.1.4.1.498.6.11.2.2.1.3 | sc553NetworkOperLineType | 0 | 0 | The values describe: 'manEsf' indicates the current setting of Line type. 'manD4'indicates the current setting of Line type. 'u… |
| 1.3.6.1.4.1.498.6.11.2.2.1.4 | sc553NetworkInterfaceType | 0 | 0 | The operating mode of the interface. Setting the value of this object to ds1(1) configures the interface as standard DS1. Setti… |
| 1.3.6.1.4.1.498.6.11.2.2.1.5 | sc553NetworkPreequalization | 0 | 0 | Is the preequalization of the transmitter of the interface. This object interoperates with the object sc553NetworkInterfaceType.… |
| 1.3.6.1.4.1.498.6.11.2.2.1.7 | sc553NetworkOperLineBuildout | 0 | 0 | This variable is used to report the current Ntwk build-out setting if the sc553NetworkInterfaceType is set for ds1(1). tx00dB(2)… |
| 1.3.6.1.4.1.498.6.11.2.2.1.8 | sc553NetworkOnesDensity | 0 | 0 | The ones density restriction for the interface. The values of this object define the ones density restriction that is enforced o… |
| 1.3.6.1.4.1.498.6.11.2.2.1.9 | sc553NetworkTransmitClockSource | 0 | 0 | None |
| 1.3.6.1.4.1.498.6.11.2.2.1.10 | sc553NetworkFallbackClockSource | 0 | 0 | None |
| 1.3.6.1.4.1.498.6.11.2.2.1.11 | sc553NetworkFDLdcc | 0 | 0 | Controls whether or not the DCC uses the FDL as its transport. The FDL is only available when the DS1 line type is ESF, a full D… |
| 1.3.6.1.4.1.498.6.11.2.2.1.12 | sc553NetworkAISLoopdown | 0 | 0 | The time in seconds when receiving a continuous AIS signal before a remotely initiated loopback is terminated. When this object … |
| 1.3.6.1.4.1.498.6.11.2.2.1.13 | sc553NetworkLoopbackConfig | 0 | 0 | This variable is used to set the In-Band DS1 Loopback Code Detection. none(1) refers to when the in-band loopback codes are ignor… |
| 1.3.6.1.4.1.498.6.11.2.2.1.14 | sc553NetworkLineCoding | 0 | 0 | This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its chara… |
| 1.3.6.1.4.1.498.6.11.2.2.1.15 | sc553NetworkFdl | 0 | 0 | This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties: sc553Fdl-none(1) indicates th… |